FPGA Reference Design for Rad Hard Applications

Added on April 26, 2013
Intersil's FPGA reference design featuring the ISL70001SEH, ISL70002SEH, and ISL75051SRH radiation hardened products at APEC 2013.

Related Resources

VIRTEX5MEZPWREV1Z User Guide VIRTEX5MEZPWREV1Z User Guide

an1707.pdf (2.18 MB)
Nov 2014

Space Products Space Products

br-558.pdf (1.87 MB)
Sep 2017

 


Video Transcript

Hello from APEC 2013 here in Long Beach, CA. My name is Josh Broline, I'm the product marketing manager for Space and High reliability products group here at Intersil. Here we are demoing Intersil's FPGA reference design, specifically for Xilinx. We have three point-of-load regulators, the ISL70001SEH, which is a 6 amp regulator. Also, we have the ISL70002SEH, which has an output of 12 amps. It can also be powered off of a 3.3 or 5 volt rail. And last we have the ISL75051, which is a 3 amp, low dropout regulator. It has superior dropout performance. For example, at 65 millivolts at 1.5 amps, or about 225 millivolts at 3 amps. I would actually put this product up specifically next to a commercial type product.

The critical thing to know about these particular products is that we did specific roundup designs to ensure that these products would survive the space and harsh environments. For example, we have single vent transient immunity within plus or minus 1%. So if you have a stack up say at plus or minus 5% that is absolutely critical very tight performance, whether it be at single vent transient over radiation and all the different conditions that you would run into. For more information, you can go to intersil.com/space. We have reference designs, application notes. You can get schematics and layout files or you can find more information on these particular products. Also, you can go to the specific product information pages for each individual product.