HIP2103/04 Half Bridge Drivers Demo

Added on April 04, 2014
Intersil demonstrates the HIP2103 and HIP2104 half bridge drivers designed for 3-phase, brush-less DC motors or other applications with similar loads.

Related Videos

Play Video
6:34
The HIP2103 and HIP2104 are half bridge drivers designed for applications using DC motors, three-phase brushless DC motors, or other similar loads.
Play Video
3:18
Intersil demonstrates the HIP2103 and HIP2104 half bridge drivers designed for 3-phase, brush-less DC motors or other applications with similar loads.
Play Video
6:34
The HIP2103 and HIP2104 are half bridge drivers designed for applications using DC motors, three-phase brushless DC motors, or other similar loads.
Play Video
3:18
Intersil demonstrates the HIP2103 and HIP2104 half bridge drivers designed for 3-phase, brush-less DC motors or other applications with similar loads.
Play Video
6:34
The HIP2103 and HIP2104 are half bridge drivers designed for applications using DC motors, three-phase brushless DC motors, or other similar loads.
Play Video
3:18
Intersil demonstrates the HIP2103 and HIP2104 half bridge drivers designed for 3-phase, brush-less DC motors or other applications with similar loads.

 


Video Transcript

Hello, my name is Richard Garcia. I'm the factory applications engineer for bridge drivers. This year, we're highlighting a couple of new parts that were designed specifically for battery-powered tool applications or any application that is battery-powered.

This product is the HIP2103 and the HIP2104. It has some unique features that are very important to battery applications. One of which is very low bias current. We have a technology that allows us to implement Sleep mode without needing a separate enable pin. The smaller package, the HIP2103 is in an 8-pin, 3-by-3 DFN package which is about as small as you can get, which is important for applications such as handheld tools that require very small area.

The HIP2104 is also exactly the same as the HIP2103 except that it also has two internal voltage regulators. One regulator operates at 12V. The other regulator operates at 3.3V. The 12V is used to provide the bias for the driver section itself, and the 3.3V is used to provide the bias for the external controller.

In a typical application such as the BLDC three-phase motor, you would use one 2104 to provide the bias, and you would then use an additional two other HIP2103s to provide the three-gate drives that are necessary for a BLDC motor.

This demo board that we have utilizes all two drivers, the HIP2104 and two 2103s. We use the daughter card for the controller so that if you desire to evaluate our drivers but with your own controller, it's easy to replace the daughter card with your own controller, using whatever method you wanna use. This product has been operating for three days now off of a 20V battery, and of course, we don't have a very heavy load but this is a good example of how power efficient you can be with a BLDC motor.

Also available with the demo board or independently if you like, we have an application note that covers in quite a bit of detail, the basics of how a three-phase BLDC motor operates. We also have a datasheet. Both of these products are released and in production. To get more information, please go to our Intersil website, intersil.com, and just by entering the part numbers, the HIP2103 or HIP2104, you will be directed to the main webpage that provides all of the information that you can possibly need for this driver.