- QML Qualified Per MIL-PRF-38535 Requirements
- 1.25Micron Radiation Hardened SOS CMOS
- Radiation Environment
- Latch-up Free Under any Conditions
- Total Dose 3 x 105 RAD(Si)
- SEU Immunity <1 x 10-10 Errors/Bit/Day
- SEU LET Threshold >100MeV/(mg/cm2)
- Input Logic Levels VIL = (0.3V)(VCC), VIH = (0.7V)(VCC)
- Output Current ±16mA
- Quiescent Supply Current 20µA
- Propagation Delay 9.0ns
The Radiation Hardened ACS244MS is a Non-Inverting, Octal, Three-State Buffer/Line Driver with two active-LOW Enable inputs (AE and BE). Each Enable input controls four outputs. When an Enable input is LOW, the corresponding outputs are active. A HIGH on an Enable input causes the corresponding outputs to be high impedance, regardless of the input levels.
The ACS244MS is fabricated on a CMOS Silicon on Sapphire (SOS) process, which provides an immunity to Single Event Latch-up and the capability of highly reliable performance in any radiation environment. These devices offer significant power reduction and faster performance when compared to ALSTTL types.
Specifications for Rad Hard QML devices are controlled by the Defense Logistics Agency Land and Maritime (DLA). The SMD numbers listed below must be used when ordering.
Detailed Electrical Specifications for the ACS244 are contained in SMD 5962-98541.
- Databus Driving
- Data Routing
- Redundant Data Control Circuitry
|AN9867: End of Life Derating: A Necessity or Over Kill|
End of Life Derating: A Necessity or Over Kill
13 Nov 2014
|13 Nov 2014||35 KB|
Radiation Hardened Non-Inverting, Octal, Three-State Buffer/Line Driver
02 Nov 2016
|02 Nov 2016||150 KB|
Standard Microcircuit Drawings
|SMD 5962-98541 (ACS244MS)|
ACS244MS electrically screened to Standard Microcircuit Drawing (SMD) 5962-98541.
12 Jan 2015
|12 Jan 2015|
|Intersil Commercial Lab Services|
Test of Intersil Commercial Lab Services Description
18 Nov 2014
|18 Nov 2014||364 KB|