- Lithium Ion/Polymer battery charging
- Dual input - USB host or car/wall adapter
- Input voltage withstanding up to 28V
- 5.4V overvoltage protection on VUSB inputs
- Charging current up to 1.2A
- 4.9V/10mA linear regulator with input OVP
- Current limit on bypass path
- Programmable end-of-charge current
- Programmable charging current
- Programmable USB current limit
- Charging and power present indicator pins
- Charge enable pin
- Reverse current protection
The ISL9221 Lithium Ion charging IC is designed to meet the charging requirements of most of today's handheld devices. The IC provides two inputs for either USB connection where the current is limited by the USB standard or for powering/charging from a power adapter.
If the voltage at either VUSB or VDC pin is within the safe allowable range, the PPR pin is pulled low indicating to the system processor that external power is available.
Charging can be enabled/disabled by controlling the state of the EN pin. While charging, the CHG pin is pulled low indicating the battery is being charged.
The battery is charged to 4.2V with only a 1% error across the temperature range. USB charge current, Adapter charge current and charge termination currents can be programmed via external resistors.
The ISL9221 adds an additional feature in providing a limited amount of current to system architecture while protecting the system from destructively high voltage.
The device contains Thermal regulation and protection to provide additional safety features of this device. When the temperature exceeds +125°C, the current will fold back to reduce and control the die temperature.
- Smart Handheld Devices
- Cell Phones, PDAs, MP3 Players
- Digital Still Cameras
- Handheld Test Equipment
|VOUT (typ) (V)||4.2||4.2||4.5||4.2|
|Voltage Accuracy (%)||1||0.7||1||1|
|VIN1 (max)||28 V||28 V||28 V||28 V|
|IOUT1 (max) (A)||1.2||1.1||0.8||1|
|IOUT2 (max) (A)||.01||N/A||N/A||N/A|
|Accepts CC Adapter||Yes||Yes||Yes||No|
|VIN1 Trickle Charge (min) (% CC)||18||10||6||16|
|VIN2 Trickle Charge (min) (% CC)||N/A||N/A||N/A||17|
|Function(s)||Enable, Charge Status, Power Present Indicator||Enable, Trickle Mode Indication, Charge State Indication, Adapter Fault, PGOOD, ISET, NTC Input, Time Set||Power Presence, Charge Indication, Battery Disconnect, IREF, IMIN Set, Time Set||Enable, Charge Status, Programmable IMIN, Reference Voltage|
|Battery Chemistry||Single Cell Li+/Polymer||Single Cell Li+/Polymer||Single Cell Li+/Polymer||Single Cell Li+/Polymer|
Dual Input Lithium Ion Battery Charger with OVP USB Bypass and 10mA LDO
04 Dec 2015
|04 Dec 2015||350 KB|
|ISL9221EVAL1Z User Guide|
ISL9221EVAL1Z User Guide
05 Dec 2014
|05 Dec 2014||237 KB|
|Five Easy Steps to Create a Multi-Load Power Solution|
30 Jan 2017
|30 Jan 2017||502 KB|