- Gain-of-1 bandwidth = 1.4GHz/gain-of-2 bandwidth = 800MHz
- 6000V/µs slew rate
- Single and dual supply operation from 5V to 12V
- Low noise = 1.5nV/√Hz
- 12mA supply current
- Fast enable/disable (5962-0625601QXC only)
The 5962-0625601QXC and 5962-0625602QXC are fully DSCC SMD compliant parts and the SMD data sheets are available on the DSCC website. The 5962-0625601QXC is electrically equivalent to the EL5166, the 5962-0625602QXC is electrically equivalent to the EL5167. Reference equivalent "EL" data sheet for additional information. The amplifiers are of the current feedback variety and exhibit a very high bandwidth of 1.4GHz at AV = +1 and 800MHz at AV = +2. This makes these amplifiers ideal for today's high speed video and monitor applications, as well as a number of RF and IF frequency designs.
With a supply current of just 12mA and the ability to run from a single supply voltage from 5V to 12V, these amplifiers offer very high performance for little power consumption.
The 5962-0625601QXC also incorporates an enable and disable function to reduce the supply current to 13µA typical per amplifier. Allowing the CE pin to float or applying a low logic level will enable the amplifier.
- Video amplifiers
- Cable drivers
- RGB amplifiers
- Test equipment
- Current to voltage converters
|AN1694: The Four Basic Building Blocks of an Op Amp|
The Four Basic Building Blocks of an Op Amp
25 Jan 2018
|25 Jan 2018||348 KB|
|5962-0625601, 5962-0625602 Datasheet|
1.4GHz Current Feedback Amplifiers with Enable
27 Nov 2017
|27 Nov 2017||190 KB|