| |
|
| |
| Single Digitally Controlled Potentiometer (XDCP™) |
| |
| Ordering Information |
|
 |
 |
|
 iBuy direct from Intersil
|
 iBuy direct - out of stock
|
 Request samples
|
 Check distributor inventory
|
Available in RoHS/Pb-Free
|
|
|
|
|
|
|
Part No. |
Design-In
Status |
Temp. |
Package |
MSL |
Price
US $ |
|
|
|
|
|
|
| ISL95811UFRTZ |
Active |
Full-Range Ind |
8 Ld TDFN |
1 |
0.89 |
 |
 |
 |
 |
|
|
| ISL95811UFRTZ-TK |
Active |
Full-Range Ind |
8 Ld TDFN T+R |
1 |
0.89 |
|
 |
|
|
|
|
| ISL95811UFUZ |
Active |
Full-Range Ind |
8 Ld MSOP |
1 |
0.89 |
|
 |
|
|
|
|
| ISL95811UFUZ-T |
Active |
Full-Range Ind |
8 Ld MSOP T+R |
1 |
0.89 |
|
 |
|
|
|
|
| ISL95811UFUZ-TK |
Active |
Full-Range Ind |
8 Ld MSOP T+R |
1 |
0.89 |
|
 |
|
|
|
|
| ISL95811WFRTZ |
Active |
Full-Range Ind |
8 Ld TDFN |
1 |
0.89 |
|
 |
|
|
|
|
| ISL95811WFRTZ-TK |
Active |
Full-Range Ind |
8 Ld TDFN T+R |
1 |
0.89 |
|
 |
|
|
|
|
| ISL95811WFUZ |
Active |
Full-Range Ind |
8 Ld MSOP |
1 |
0.89 |
|
 |
|
|
|
|
| ISL95811WFUZ-T |
Active |
Full-Range Ind |
8 Ld MSOP T+R |
1 |
0.89 |
|
 |
|
|
|
|
| ISL95811WFUZ-TK |
Active |
Full-Range Ind |
8 Ld MSOP T+R |
1 |
0.89 |
|
 |
|
|
|
|
| The price listed is the manufacturer's suggested retail price for quantities of 1K units. However, prices in today's market are fluid and may change without notice. |
| MSL = Moisture Sensitivity Level - per IPC/JEDEC J-STD-020 |
| SMD = Standard Microcircuit Drawing |
|
| |
 Description |
|
|
The ISL95811 integrates a digitally controlled potentiometer (XDCP) and non-volatile memory on a monolithic CMOS integrated circuit.
The digitally controlled potentiometer is implemented with a combination of resistor elements and CMOS switches. The position of the wiper is controlled by the user through the I2C bus interface. The potentiometer has an associated volatile Wiper Register (WR) and a non-volatile Initial Value Register (IVR), that can be directly written to and read by the user. The content of the WR controls the position of the wiper. At power-up the device recalls the contents of the DCP's IVR to the WR.
The DCP can be used as three-terminal potentiometer or as two-terminal variable resistor in a wide variety of applications including control, parameter adjustments and signal processing. |
| |
 Key Features |
|
|
| |
-
256 Resistor Taps - 0.4% Resolution
-
I2C Serial Interface
-
5 General Purpose Non-Volatile Bytes
-
Non-volatile Storage of Wiper Position
-
Write Protection
-
Wiper Resistance: 70Ω Typical @ VCC = 3.3V
-
Standby Current 10μA Max
-
Power Supply: 2.7V to 5.5V
-
50kΩ, 10kΩ Total Resistance
-
High Reliability
-
Endurance: 1,000,000 Data Changes per Bit per Register
-
Register Data Retention: 50 Years @ T ≤ +55°C
-
8 Ld MSOP and 8 Ld TDFN Packaging
-
Pb-Free Pinouts (RoHS compliant)
|
| Related Documentation |
|
|
| |
 Application Note(s): |
|
| |
 Datasheet(s): |
| | |
 Technical Homepage: |
| | | |
| |
 Parametric Data |
| | # of Devices/ Channels | | 1 | | | # of Taps | | 256 | | | Memory Type | | Non-Volatile | | | Bus Interface Type | | I2C | | | Resistance Options (kΩ) | | 10, 50 | | | VCC Range (V) | | 2.7 to 5.5 | | | VCC (min) (V) | | 2.7 | | | VCC (max) (V) | | 5.5 | | | DCP Dual Supply Range (V) | | N/A | | | DCP Single Supply Range (V) | | 0 to 5.5 | | | Resistance Taper | | Linear | | | Wiper Current (mA) | | 3 | | | Wiper Resistance (Ω) | | 70 | | | Supply Current (μA) | | 10 | | | Max Operating Temp (°C) | | 125 | | | End-to-End Tempco (ppm/°C) | | 45 | | | Middlepoint Ratiometric Tempco (ppm/°C) | | 4 | | | VL min. terminal voltage (V) | | 0 | | | VH max. terminal voltage (V) | | 5.5 | | | Features | | 5 Bytes General Purpose EEPROM (scratchpad) | |
|
| |
 Application Block Diagrams |
|
| |
|
| |
|
|
| |
| | ISL22313 | | Single Digitally Controlled Potentiometer (XDCP™), Low Noise, Low Power, I2C® Bus, 256 Taps | | | ISL22414 | | Single Digitally Controlled Potentiometer (XDCP™), Low Noise, Low Power, SPI® Bus, 256 Taps | | | ISL95810 | | Single Digitally Controlled Potentiometer (XDCP™) | | | X9271 | | Single Digitally-Controlled (XDCP™) Potentiometer | | | X9279 | | Single Digitally-Controlled (XDCP™) Potentiometer | |
|
Related Devices