Device Information
 
 
ICL7660 Print Page
 
CMOS Voltage Converters
 
Ordering Information
 iBuy direct from Intersil  iBuy direct - out of stock  Request samples
 Check distributor inventory Green/Pb(Lead free) Device  Available in RoHS/Pb-Free  
Part No. Design-In
Status
Temp. Package MSL Price
US $
PB Free
ICL7660CBA Active Comm 8 Ld SOIC 1 0.56  iBuy Disti-Buy  
ICL7660CBA-T Active Comm 8 Ld SOIC T+R 1 0.61  iBuy Disti-Buy  
ICL7660CBAZ Active Comm 8 Ld SOIC 1 0.47 PB Free iBuy Disti-Buy Sample
ICL7660CBAZ-T Active Comm 8 Ld SOIC T+R 1 0.51 PB Free iBuy Disti-Buy  
ICL7660CBAZA Active Comm 8 Ld SOIC 1 0.47 PB Free iBuy Disti-Buy  
ICL7660CBAZA-T Active Comm 8 Ld SOIC T+R 1 0.51 PB Free iBuy Disti-Buy  
ICL7660CPA Active Comm 8 Ld PDIP N/A 0.57  iBuy Disti-Buy  
ICL7660CPAZ Active Comm 8 Ld PDIP N/A 0.48 PB Free iBuy Disti-Buy Sample
The price listed is the manufacturer's suggested retail price for quantities of 1K units. However, prices in today's market are fluid and may change without notice.
MSL = Moisture Sensitivity Level - per IPC/JEDEC J-STD-020
SMD = Standard Microcircuit Drawing
 
  Description

The Intersil ICL7660 and ICL7660A are monolithic CMOS power supply circuits which offer unique performance advantages over previously available devices. The ICL7660 performs supply voltage conversions from positive to negative for an input range of +1.5V to +10.0V resulting in complementary output voltages of -1.5V to -10.0V and the ICL7660A does the same conversions with an input range of +1.5V to +12.0V resulting in complementary output voltages of -1.5V to -12.0V. Only 2 noncritical external capacitors are needed for the charge pump and charge reservoir functions. The ICL7660 and ICL7660A can also be connected to function as voltage doublers and will generate output voltages up to +18.6V with a +10V input.

Contained on the chip are a series DC supply regulator, RC oscillator, voltage level translator, and four output power MOS switches. A unique logic element senses the most negative voltage in the device and ensures that the output NChannel switch source-substrate junctions are not forward biased. This assures latchup free operation.

The oscillator, when unloaded, oscillates at a nominal frequency of 10kHz for an input supply voltage of 5.0V. This frequency can be lowered by the addition of an external capacitor to the "OSC" terminal, or the oscillator may be overdriven by an external clock.

The "LV" terminal may be tied to GROUND to bypass the internal series regulator and improve low voltage (LV) operation. At medium to high voltages (+3.5V to +10.0V for the ICL7660 and +3.5V to +12.0V for the ICL7660A), the LV pin is left floating to prevent device latchup.

 
  Key Features
 
  • Simple Conversion of +5V Logic Supply to ±5V Supplies
  • Simple Voltage Multiplication (VOUT = (-) nVIN)
  • Typical Open Circuit Voltage Conversion Efficiency 99.9%
  • Typical Power Efficiency 98%
  • Wide Operating Voltage Range
    • ICL7660 1.5V to 10.0V
    • ICL7660A 1.5V to 12.0V
  • ICL7660A 100% Tested at 3V
  • Easy to Use - Requires Only 2 External Non-Critical Passive Components
  • No External Diode Over Full Temp. and Voltage Range
  • Pb-Free Plus Anneal Available (RoHS Compliant)
Related Documentation
 
Application Note(s)   Application Note(s):
 
Datasheet(s)   Datasheet(s):
 
   Other:
 
  Parametric Data
VIN (min) (V)1.5
VIN (max) (V)12
VOUT (min) (V)1.5
VOUT (max) (V)22.8
IOUT (max) (mA)45
IS (typ) (mA).08
IS (max) (mA).165
Switching Freq. (kHz)10
 
  Application Block Diagrams
 
 
 
Applications
 
  • On Board Negative Supply for Dynamic RAMs
  • Localized µProcessor (8080 Type) Negative Supplies
  • Inexpensive Negative Supplies
  • Data Acquisition Systems
 
  Related DevicesParametric Table   Parametric Table
 
 ICL7660S Super Voltage Converter 

 

About Us | Careers | Contact Us | Investors | Legal | Privacy | Site Map | Subscribe | Intranet

©2003-2009. Intersil Americas Inc. All rights reserved.