Device Information
 
 
ISL9217 Printer Friendly Version
8 to 12 Cell Li-Ion Battery Overcurrent Protection and Analog Front End Chip Set
 
Features DescriptioniSim Design Simulation
Technical DocumentationTools And Support
Pricing / SamplesRelated Devices
 
Buy Direct from Intersil
 Order Samples
 ISL9217IRZOrder Samples
 Buy Parts
 Not Available
 Buy Eval Boards
 Not Available


 Distributor Inventory
ISL9217IRZDetails
ISL9217IRZ-TDetails
Datasheet
Adobe Acrobat Document ISL9217
8 to 12 Cell Li-Ion Battery Overcurrent Protection and Analog Front End Chip Set
# of Series Connected Li-Ion Cells1 to 7
Power FET ControlN
Overvoltage ShutdownN
Undervoltage ShutdownN
Overcurrent ShutdownN
Short Circuit ShutdownN
Programmable ThresholdN
Programmable TimeoutN
Cell Voltage MonitorY
Pack Current MonitorN
Cell Balancing FETsY
Voltage Regulator (V)3.3
InterfaceI2C
 

Product Information

Key Features
  • Software selectable overcurrent protection levels and variable protect detection/release times
    • 4 Discharge overcurrent thresholds
    • 4 Short circuit thresholds
    • 4 Charge overcurrent thresholds
    • 8 Overcurrent delay times (Charge)
    • 8 Overcurrent delay times (Discharge)
    • 2 Short circuit delay times (Discharge)
  • Automatic FET turn-off and cell balance disable on reaching external (battery) or internal (IC) temperature limit
  • Automatic over-ride of cell balance on reaching internal (IC) temperature limit
  • Fast short circuit pack shutdown
  • Can use current sense resistor, FET rDS(ON), or Sense FET for overcurrent detection
  • Four battery backed software controlled flags
  • Allows three different FET controls:
    • Back-to-back N-Channel FETs for charge and discharge control
    • Single N-Channel FET for discharge control
    • N-Channel FET for discharge, with separate, optional (smaller) back-to-back FET for charge
  • Chips cascade for packs of 8 to 12 cells
  • Integrated charge/discharge FET drive circuitry with 200μA (typ) turn on current and 150mA (typ) discharge FET turn off current
  • 10% accurate 3.3V voltage regulator (35mA out with external NPN transistor having current gain of 70)
  • Cell voltage monitor accurate to within 25mV
  • Monitored cell voltage output stable in 100μs
  • Internal cell balancing FETs handle up to 200mA of balancing current for each cell (with the number of cells being balanced limited by the maximum power dissipation of 400mW)
  • Simple I2C host interface
  • Sleep operation with programmable negative edge or positive edge wake-up
Description

The ISL9216 and ISL9217 chipset provides overcurrent protection and voltage monitoring for multi-cell li-ion battery packs consisting of 8 to 12 cells. When used together, these devices provide integrated overcurrent protection circuitry, short circuit protection, an internal voltage regulator, internal cell balancing switches, cell voltage level shifters, and drive circuitry for external FET devices that control pack charge and discharge. Level shifting of the analog output voltage from the upper cells and communication between the chips is handled automatically.

Overcurrent and short circuit thresholds reside in internal RAM registers and are selected independently via software using an I2C serial interface. Detection and time-out delays can be individually varied using internal registers. Using an internal analog multiplexer, the device provides monitoring of cell voltage by a separate microcontroller with A/D converter. Software on this microcontroller implements all battery control functionality, except for overcurrent and short circuit shutdown.

Pricing / Packaging / Samples / Ordering

 iBuy direct from Intersil iBuy direct - out of stock Request samples
 Check distributor inventoryGreen/Pb(Lead free) Device Available in RoHS/Pb-Free 
Part No.Design-In
Status
Temp.PackageMSLPrice
US $
PB Free
ISL9217IRZ Active Ind 24 Ld QFN 1 3.51 PB Free Disti-Buy Sample
ISL9217IRZ-T Active Ind 24 Ld QFN T+R 1 3.51 PB Free Disti-Buy  
The price listed is the manufacturer's suggested retail price for quantities of 1K units. However, prices in today's market are fluid and may change without notice.
MSL = Moisture Sensitivity Level - per IPC/JEDEC J-STD-020
SMD = Standard Microcircuit Drawing

Technical Documentation

Application Note(s):
Datasheet(s):
Evaluation Board(s):
Tools And Support
iSim Design Simulation
No Models Available
Application Block Diagrams
Applications
  • Power Tools
  • Battery Backup Systems
  • E-bikes
  • Portable Test Equipment
  • Medical Systems
  • Hybrid Vehicle
  • Military Electronics
  Related DevicesParametric Table   Parametric Table
 ISL9208 Multi-Cell Li-ion Battery Pack OCP/Analog Front End 
 ISL9216 8 to 12 Cell Li-Ion Battery Overcurrent Protection and Analog Front End Chip Set 
 ISL94200 Multi-Cell Li-ion Battery Pack OCP/Analog Front-End 
 ISL94201 Multi-Cell Li-ion Battery Pack Analog Front-End 

 

About Us | Careers | Contact Us | Investors | Legal | Privacy | Site Map | Subscribe | Intranet

©2003-2010. Intersil Americas Inc. All rights reserved.