Device Information
 
 
ISL9201 Printer Friendly Version
 
Li-ion Battery Charger
 
Datasheets,
Related Docs
& Simulations
DescriptionKey
Features
Parametric
Data
Application
Diagrams
Related
Devices
 
 
Ordering Information
 iBuy direct from Intersil  iBuy direct - out of stock  Request samples
 Check distributor inventory Green/Pb(Lead free) Device  Available in RoHS/Pb-Free  
Part No. Design-In
Status
Temp. Package MSL Price
US $
PB Free
ISL9201IRZ Active Ind 10 Ld DFN 2 0.87 PB Free Out of stock Disti-Buy Sample
ISL9201IRZ-T Active Ind 10 Ld DFN T+R 2 0.91 PB Free Disti-Buy  
The price listed is the manufacturer's suggested retail price for quantities of 1K units. However, prices in today's market are fluid and may change without notice.
MSL = Moisture Sensitivity Level - per IPC/JEDEC J-STD-020
SMD = Standard Microcircuit Drawing
 
  Description

The ISL9201 is an integrated single-cell Li-ion or Li-polymer charger capable of operating at an input voltage as low as 2.5V. The low operating voltage allows the charger to work with a variety of AC adapters.

The ISL9201 operates as a linear charger when the AC adapter is a voltage source. The battery is charged in a standard Li-ion charge profile, i.e. a constant current phase followed be a constant voltage phase (CC/CV). The charge current during the constant current phase is determined by the external resistor connected to the IREF pin. When the adapter output is a current-limited voltage source and the current limit is smaller than the programmed constant current of the IC, the ISL9201 operates as a pulse charger where the charge current is determined by the current limit of the AC adapter during the constant current phase. The ISL9201 operates in a linear mode during the constant voltage phase in both adapter cases.

The ISL9201 incorporates ThermaguardŽ, which protects the IC against over-temperature. If the die temperature rises above a typical value of +110 °C, the thermal foldback function reduces the charge current to prevent further temperature rise. The ISL9201 also includes a timer to set the time reference for the delay time of the end-of-charge (EOC) and recharge indications. The timer is programmable with an external capacitor. A logic input and an open-drain logic output are available for controlling the charger and indicating the charger status. The EN pin enables the charger. The STATUS pin is an open-drain output which turns on when the charger is delivering current. The charger uses a 10 Ld 3x3 DFN package to maximize thermal conductivity.

 
  Key Features
 
  • Complete Charger for Single-Cell Li-ion/Polymer Batteries
  • Integrated Pass Element and Current Sensor
  • No External Blocking Diode Required
  • Low Component Count and Cost
  • 25mV Voltage Accuracy Over-Temperature and Input Voltage Range
  • 20mV Voltage Accuracy at Room Temperature
  • Programmable Charge Current
  • Charge Current Thermal Foldback for Thermal Protection (ThermaguardŽ)
  • Trickle Charge for Fully Discharged Batteries
  • Power Presence and Charge/EOC Indications
  • Less than 4μA Leakage Current off the Battery when No Input Power Attached or Charger Disabled
  • Ambient Temperature Range: -40°C to +85°C
  • DFN Package
  • Pb-Free Plus Anneal Available (RoHS Compliant)
Related Documentation
 
Datasheet(s)   Datasheet(s):
 
  Parametric Data
VOUT (typ) (V)4.2
Voltage Accuracy (%).6
VIN1 (max) (V)7
VIN2 (max) (V) N/A
IOUT1 (max) (A)1
IOUT2 (max) (A)N/A
Safety TimerY
Self TerminationY
Accepts CC AdapterY
VIN1 Trickle Charge (min) (% CC)10
VIN2 Trickle Charge (min) (% CC)N/A
Thermal RegulationY
Functions
(Pin)
Enable, Charge Status, Reference Voltage
 
  Application Block Diagrams
 
 
 
Applications
 
  • Mobile Phones
  • Blue-Tooth Devices
  • PDAs
  • MP3 Players
  • Stand-Alone Cradle or Travel Chargers
  • Other Handheld Devices
 
  Related DevicesParametric Table   Parametric Table
 
 ISL6291 Li-ion/Li Polymer Linear Battery Charger 
 ISL6292 Li-ion/Li Polymer Battery Charger 
 ISL6292B Li-ion/Li Polymer Battery Charger 
 ISL6292C Li-ion/Li Polymer Battery Charger 
 ISL6292D Li-ion/Li Polymer Battery Charger 
 ISL6293 Li-ion/Li Polymer Battery Charger Accepting Two Power Sources 
 ISL6294 High Input Voltage Charger 
 ISL6294A High Input Voltage Charger 
 ISL6297 Li-ion/Li Polymer Battery Charger 
 ISL6298 Li-ion/Li-Polymer Battery Charger 
 ISL6299A Li-ion/Li-Polymer Battery Charger Accepting Two Power Sources 
 ISL9203A Li-ion/Li Polymer Battery Charger 
 ISL9203R5220 Li-ion/Li Polymer Battery Charger 
 ISL9204 High Input Voltage Charger 
 ISL9205 Li-ion Battery Charger 
 ISL9205A Li-ion Battery Charger 
 ISL9205B Li-ion Battery Charger 
 ISL9205C Li-ion Battery Charger 
 ISL9205D Li-ion Battery Charger 
 ISL9214 Li-ion/Li-Polymer Battery Charger Accepting Two Power Sources 
 ISL9214A Li-ion/Li-Polymer Battery Charger Accepting Two Power Sources 
 ISL9219 Li-ion Battery Charger 
 ISL9221 Dual Input Lithium Ion Battery Charger with OVP USB Bypass and 10mA LDO 
 ISL9222A High Input Voltage Charger 
 ISL9228 Dual Input Li-ion/Li-Polymer Battery Charger With Battery Removal Detection 
 ISL9301 High Input Voltage Charger With Power Path Management 

 

About Us | Careers | Contact Us | Investors | Legal | Privacy | Site Map | Subscribe | Intranet

©2003-2009. Intersil Americas Inc. All rights reserved.