| |
|
| |
| Single Volatile 128-Tap Digitally Controlled Potentiometer (XDCP™) |
| |
|
| |
| |
| Ordering Information |
|
 |
 |
|
 iBuy direct from Intersil
|
 iBuy direct - out of stock
|
 Request samples
|
 Check distributor inventory
|
Available in RoHS/Pb-Free
|
|
|
|
|
|
|
Part No. |
Design-In
Status |
Temp. |
Package |
MSL |
Price
US $ |
|
|
|
|
|
|
| ISL90727UIE627Z |
Active |
Ind |
6 Ld SC-70 |
3 |
Contact Us |
 |
|
 |
|
|
|
| ISL90727UIE627Z-TK |
Active |
Ind |
6 Ld SC-70 T+R |
3 |
0.48 |
|
 |
|
 |
|
|
| ISL90727WIE627Z |
Active |
Ind |
6 Ld SC-70 |
3 |
Contact Us |
|
|
|
|
|
|
| ISL90727WIE627Z-TK |
Active |
Ind |
6 Ld SC-70 T+R |
3 |
0.48 |
|
 |
|
|
|
|
| The price listed is the manufacturer's suggested retail price for quantities of 1K units. However, prices in today's market are fluid and may change without notice. |
| MSL = Moisture Sensitivity Level - per IPC/JEDEC J-STD-020 |
| SMD = Standard Microcircuit Drawing |
|
| |
 Description |
|
|
The Intersil ISL90727 and ISL90728 are digitally controlled potentiometers (XDCP™). Each device consists of a resistor array, wiper switches, and a control section. The wiper position is controlled by an I2C Bus™.
The potentiometer is implemented by a resistor array composed of 127 resistive elements and a wiper switching network. Between each element and at either end are tap points accessible to the wiper terminal. The position of the wiper element is controlled by the SDA and SCL inputs. |
| |
 Key Features |
|
|
| |
-
Volatile Solid-State Potentiometer
-
I2C Serial Bus Interface
-
DCP Terminal Voltage, 2.7V to 5.5V
-
Low Tempco
-
Rheostat - 45 ppm/°C Typical
-
Divider - 15 ppm/°C Typical
-
128 Wiper Tap Points
-
Wiper Resistance 70Ω Typ at VCC = 3.3V
-
Low Power CMOS
-
Active Current, 200μA Max
-
Standby Current, 500nA Max
-
Available RTOTAL Values = 50kΩ, 10kΩ
-
Power-on Preset to Midscale
-
Packaging
-
Pb-Free (RoHS Compliant)
|
| Related Documentation |
|
|
| |
 Application Note(s): |
|
| |
 Datasheet(s): |
| | |
 Technical Brief(s): |
| | |
 Technical Homepage: |
| | | |
| |
 Parametric Data |
| | # of Devices/ Channels | | 1 | | | # of Taps | | 128 | | | Memory Type | | Volatile | | | Bus Interface Type | | I2C | | | Resistance Options (kΩ) | | 10, 50 | | | VCC Range (V) | | 2.7 to 5.5 | | | VCC (min) (V) | | 2.7 | | | VCC (max) (V) | | 5.5 | | | DCP Dual Supply Range (V) | | N/A | | | DCP Single Supply Range (V) | | 0 to 5.5 | | | Resistance Taper | | Linear | | | Wiper Current (mA) | | 3 | | | Wiper Resistance (Ω) | | 85 | | | Supply Current (μA) | | .5 | | | Max Operating Temp (°C) | | 85 | | | End-to-End Tempco (ppm/°C) | | 45 | | | Middlepoint Ratiometric Tempco (ppm/°C) | | 15 | | | VL min. terminal voltage (V) | | 0 | | | VH max. terminal voltage (V) | | 5.5 | | | Features | | Same as ISL90728 with different I2C address; RL connected to GND | |
|
| |
 Application Block Diagrams |
|
| |
|
| |
| |
| Applications |
|
| |
- Mechanical Potentiometer Replacement
- Transducer Adjustment of Pressure, Temperature, Position, Chemical, and Optical Sensors
- RF Amplifier Biasing
- LCD Brightness and Contrast Adjustment
- Gain Control and Offset Adjustment
|
| |
|
|
| |
| | ISL22416 | | Low Noise, Low Power, SPI® Bus, 128 Taps | | | ISL23710 | | Terminal Voltage ±3V or ±5V, 128 Taps Up/Down Interface | | | ISL23711 | | Volatile Digitally Controlled Potentiometer (XDCP™); Terminal Voltage ±3V or ±5V, 128 Taps I2C Serial Interface | | | ISL90726 | | Single Volatile 128-Tap Digitally Controlled Potentiometer (XDCP™) | | | ISL90728 | | Single Volatile 128-Tap Digitally Controlled Potentiometer (XDCP™) | | | ISL96017 | | 128-Tap DCP, 16kbit EEPROM, and I2C Serial Interface | |
|
