Device Information
 
 
ISL83485 Printer Friendly Version
 
3.3V, Half Duplex, 10Mbps, RS-485/RS-422 Transceiver
 
Datasheets,
Related Docs
& Simulations		DescriptionKey
Features		Parametric
Data		Related
Devices
 
 
Ordering Information
 iBuy direct from Intersil  iBuy direct - out of stock  Request samples
 Check distributor inventory Green/Pb(Lead free) Device  Available in RoHS/Pb-Free  
Part No. Design-In
Status		 Temp. Package MSL Price
US $		 PB Free
ISL83485IB Active Ind 8 Ld SOIC 1 1.35  Buy Direct Disti-Buy Sample
ISL83485IBZ Active Ind 8 Ld SOIC 1 1.12 PB Free Buy Direct Disti-Buy Sample
ISL83485IBZ-T Active Ind 8 Ld SOIC T+R 1 1.12 PB Free Disti-Buy  
ISL83485IP Active Ind 8 Ld PDIP N/A 1.35  Out of stock Disti-Buy Sample
ISL83485IB-T InActive Ind 8 Ld SOIC T+R 1 N/A      
The price listed is the manufacturer's suggested retail price for quantities of 1K units. However, prices in today's market are fluid and may change without notice.
MSL = Moisture Sensitivity Level - per IPC/JEDEC J-STD-020
SMD = Standard Microcircuit Drawing
 
  Description

These Intersil RS-485/RS-422 devices are BiCMOS 3.3V powered, single transceivers that meet both the RS-485 and RS-422 standards for balanced communication. Unlike competitive devices, this Intersil family is specified for 10% tolerance supplies (3V to 3.6V).

The ISL83483 and ISL83488 utilize slew rate limited drivers which reduce EMI, and minimize reflections from improperly terminated transmission lines, or unterminated stubs in multidrop and multipoint applications.

Data rates up to 10Mbps are achievable by using the ISL83485, ISL83490, or ISL83491, which feature higher slew rates.

Logic inputs (e.g., DI and DE) accept signals in excess of 5.5V, making them compatible with 5V logic families.

Receiver (Rx) inputs feature a "fail-safe if open" design, which ensures a logic high output if Rx inputs are floating. All devices present a "single unit load" to the RS-485 bus, which allows up to 32 transceivers on the network.

Driver (Tx) outputs are short circuit protected, even for voltages exceeding the power supply voltage. Additionally, on-chip thermal shutdown circuitry disables the Tx outputs to prevent damage if power dissipation becomes excessive.

The ISL83488, ISL83490, ISL83491 are configured for full duplex (separate Rx input and Tx output pins) applications. The ISL83488 and ISL83490 are offered in space saving 8 lead packages for applications not requiring Rx and Tx output disable functions (e.g., point-to-point and RS-422). Half duplex configurations (ISL83483, ISL83485) multiplex the Rx inputs and Tx outputs to provide transceivers with Rx and Tx disable functions in 8 lead packages.

 
  Key Features
 
  • Operate from a Single +3.3V Supply (10% Tolerance)
  • Interoperable with 5V Logic
  • High Data Rates up to 10Mbps
  • Single Unit Load Allows up to 32 Devices on the Bus
  • Slew Rate Limited Versions for Error Free Data Transmission (ISL83483, ISL83488) up to 250kbps
  • Low Current Shutdown Mode (ISL83483, ISL83485, ISL83491) 15nA
  • -7V to +12V Common Mode Input Voltage Range
  • Three State Rx and Tx Outputs (Except ISL83488, ISL83490)
  • 10ns Propagation Delay, 1ns Skew (ISL83485, ISL83490, ISL83491)
  • Full Duplex and Half Duplex Pinouts
  • Current Limiting and Thermal Shutdown for driver Overload Protection
Related Documentation
 
Datasheet(s)   Datasheet(s):
 
Technical Homepage   Technical Homepage:
 
Design Model(s)   Design Model(s):
 
 
  Parametric Data
# of Tx1
# of Rx1
Devices Allowed on Bus32
Half/Full DuplexHalf
High ESDNo
Hot PlugNo
Data Rate (Mbps)10
Slew Rate LimitedNo
Tx/Rx EnableYes
IS EN/DIS (µA)750/650
SHDN ICC (µA).015
VCC Range (V)3.0 to 3.6
VL PinNo
VCC (min) (V)3
VCC (max) (V)3.6
 
 
Applications
 
  • Factory Automation
  • Security Networks
  • Building Environmental Control Systems
  • Industrial/Process Control Networks
  • Level Translators (e.g., RS-232 to RS-422)
  • RS-232 "Extension Cords"
 
  Related DevicesParametric Table   Parametric Table
 
 ISL3152E 5V Half Duplex, 115kbps Slew Rate Limited, IEC61000 ESD Protected with 2.4V Vod RS-485/RS-422 Transceiver 
 ISL3170E 3.3V Full Duplex, 250kbps Slew Rate Limited With Enable, IEC61000 ESD Protected, RS-485/RS-422 Transceiver 
 ISL3172E 3.3V Half Duplex, 250kbps Slew Rate Limited, IEC61000 ESD Protected, RS-485/RS-422 Transceiver 
 ISL3173E 3.3V Full Duplex, 500kbps Slew Rate Limited With Enable, IEC61000 ESD Protected, RS-485/RS-422 Transceiver 
 ISL3175E 3.3V Half Duplex, 500kbps Slew Rate Limited, IEC61000 ESD Protected, RS-485/RS-422 Transceiver 
 ISL3176E 3.3V Full Duplex, 20Mbps With Enable, IEC61000 ESD Protected, RS-485/RS-422 Transceiver 
 ISL3178E 3.3V Half Duplex, 20Mbps, IEC61000 ESD Protected, RS-485/RS-422 Transceiver 
 ISL3179E ±15kV ESD Protected, +125°C, 40Mbps, 3.3V, Full Fail-Safe, RS-485/RS-422 Transceivers 
 ISL3180E High ESD Protected, +125°C, 40Mbps, 3.3V, Full Fail-Safe, RS-485/RS-422 Transceivers 
 ISL32179E Quad, ±16.5kV ESD Protected, 3.0V to 5.5V, Low Power, RS-422 Transmitters 
 ISL32272E Quad, ±16.5kV ESD Protected, 3.0V to 5.5V, Low Power, RS-422 Transmitters 
 ISL32274E Quad, ±16.5kV ESD Protected, 3.0V to 5.5V, Low Power, RS-422 Transmitters 
 ISL43485 3.3V, Half Duplex, 30Mbps, RS-485/RS-422 Transceiver 
 ISL81483 5V, Half Duplex, 250kbps Slew Rate Limited, RS-485/RS-422 Transceiver 
 ISL81487E 5V, Half Duplex, 5Mbps, ±15kV ESD Protected, RS-485/RS-422 Transceiver 
 ISL81487L 5V, Half Duplex, 250kbps Slew Rate Limited, ±15kV ESD Protected, RS-485/RS-422 Transceiver 
 ISL83070E ±15kV ESD Protected, 3.3V, Full Fail-safe, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers 
 ISL83072E ±15kV ESD Protected, 3.3V, Full Fail-safe, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers 
 ISL83073E ±15kV ESD Protected, 3.3V, Full Fail-safe, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers 
 ISL83075E ±15kV ESD Protected, 3.3V, Full Fail-safe, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers 
 ISL83076E ±15kV ESD Protected, 3.3V, Full Fail-safe, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers 
 ISL83078E ±15kV ESD Protected, 3.3V, Full Fail-safe, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers 
 ISL83086E ±15kV ESD, 5V, Full Fail-Safe, 1/8 Unit Load, RS-485/RS-422 Transceivers 
 ISL83088E ±15kV ESD, 5V, Full Fail-Safe, 1/8 Unit Load, RS-485/RS-422 Transceivers 
 ISL83483 3.3V, Half Duplex, 250kbps Slew Rate Limited, RS-485/RS-422 Transceiver 
 ISL83488 3.3V, Full Duplex, 250kbps Slew Rate Limited, RS-485/RS-422 Transceiver 
 ISL83490 3.3V, Full Duplex, 10Mbps, RS-485/RS-422 Transceiver 
 ISL83491 3.3V, Full Duplex, 10Mbps With Enable, RS-485/RS-422 Transceiver 
 ISL8483 5V, Half Duplex, 250kbps Slew Rate Limited, RS-485/RS-422 Transceiver 
 ISL8483E ESD Protected to ±15kV, 5V, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers 
 ISL8485 5V, Half Duplex, 5Mbps, RS-485/RS-422 Transceiver 
 ISL8485E ESD Protected to ±15kV, 5V, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers 
 ISL8487E 5V, Half Duplex, 250kbps Slew Rate Limited, ±15kV ESD Protected, 1/8 Unit Load, RS-485/RS-422 Transceiver 
 ISL8488 5V, Full Duplex, 250kbps Slew Rate Limited, RS-485/RS-422 Transceiver 
 ISL8489 5V, Full Duplex, 250kbps Slew Rate Limited With Enable, RS-485/RS-422 Transceiver 
 ISL8490 5V, Full Duplex, 5Mbps, RS-485/RS-422 Transceiver 
 ISL8490E ±15kV ESD Protected, 5V, Low Power, High Speed and Slew Rate Limited, Full Duplex, RS-485/RS-422 Transceivers 
 ISL8491 5V, Full Duplex, 5Mbps With Enable, RS-485/RS-422 Transceiver 
 ISL8491E ±15kV ESD Protected, 5V, Low Power, High Speed and Slew Rate Limited, Full Duplex, RS-485/RS-422 Transceivers 

 
About Us | Careers | Contact Us | Investors | Legal | Privacy | Site Map | Subscribe | Intranet

©2003-2009. Intersil Americas Inc. All rights reserved.