| |
|
|
| 10A, High Efficiency DC/DC Module |
| |
| |
|
|
|
|
| Buy Direct from Intersil |
 |
|
 |
| | | | ISL8201MIRZ |  |
|
 |
| | | | ISL8201MEVAL1Z |  |
|
|
|
|
|
|
|
|
 | ISL8201M | | 10A, High Efficiency DC/DC Module |
|  | | VIN (min) (V) |  | 1 |  | | VIN (max) (V) |  | 20 |  | | VOUT (min) (V) |  | .6 |  | | VOUT (max) (V) |  | 5 |  | | IOUT (max) (A) |  | 10 |  | | Iq (ľA) |  | 10000 |  | | Switching Frequency (MHz) |  | .6 |  | | Peak Efficiency (%) |  | 95 |  | | POR |  | N |  | | BOM Total Footprint |  | * |  |
| |
| Key Features |
-
Complete Switch Mode Power Supply
-
Bias Voltage Range from +4.5 to +14.4V
-
Wide Input Voltage Range from 1V up to 20V (see “Input Voltage Considerations” on page 11)
-
10A DC Output Current, 17A Peak Output Current
-
Adjustable +0.6V to +5V Output Range
-
Up to 95% Efficiency
-
Simple Voltage Mode Control
-
Fixed 600kHz Switching Frequency
-
Fast Transient Response
-
Enable Function Option
-
Pre-biased Output Start-up Capability
-
Internal Soft-Start
-
Overcurrent Protection by Low-Side MOSFET rDS(ON) Sensing (Non-Latching, Auto-Recovery)
-
Small Footprint, Low Profile Surface Mount QFN Package (15mmx15mmx3.5mm)
-
Pb-Free (RoHS Compliant)
|
|
| Description |
The ISL8201M is a 20V, 10A output current, variable output step-down power supply. Included in the 15mmx15mm package is a high performance PWM controller switching at 600kHz, power MOSFETs, an inductor, and all the passive components required for complete DC/DC power solution. The ISL8201M operates over an input voltage range of 1V to 20V and supports an output voltage range of 0.6V to 5V, which is set by a single dividing resistor. This high efficiency power module is capable of delivering 10A (17A peak) output with up to 95% efficiency, needing no heat sinks or airflow to meet power specifications. Only bulk input and output capacitors are needed to finish the design. Utilizing voltage-mode control, the output voltage can be precisely regulated to as low as 0.6V with up to ±1% output voltage regulation. The ISL8201M also features internal compensation, internal soft-start, auto-recovery overcurrent protection, an enable option, and pre-biased output start-up capability.
The ISL8201M is packaged in a thermally enhanced, compact (15mmx15mm) and low profile (3.5mm) over-molded QFN Package Module suitable for automated assembly by standard surface mount equipment. The ISL8201M is Pb-free and RoHS compliant. |
|
iBuy direct from Intersil | iBuy direct - out of stock | Request samples | Check distributor inventory | Available in RoHS/Pb-Free | |  |
 | Part No. | Design-In Status | Temp. | Package | MSL | Price US $ |  |  |  |  |
 |
 | ISL8201MEVAL1Z |
Active |
|
Eval Board |
N/A |
Contact Us |
 |
 |
 |
  |
 |
 | ISL8201MIRZ |
Active |
Ind |
15 Ld QFN |
3 |
13.19 |
 |
 |
 |
  |
 |
 | ISL8201MIRZ-T |
Active |
Ind |
15 Ld QFN T+R |
3 |
13.19 |
 |
|
 |
  |
 |
| The price listed is the manufacturer's suggested retail price for quantities of 1K units. However, prices in today's market are fluid and may change without notice. |
| MSL = Moisture Sensitivity Level - per IPC/JEDEC J-STD-020 |
| SMD = Standard Microcircuit Drawing |
|
| Datasheet(s): | | | Evaluation Board(s): | | | |
|
|
| Applications | - Servers
- Industrial Equipment
- Point of Load Regulation
- Other General Purpose Step-Down DC/DC
- Telecom and Datacom Applications
|
|
| | ISL8200M | | Complete Current Share 10A DC/DC Power Module | | | ISL8204M | | Complete High Efficiency DC/DC Power Module | | | ISL8206M | | Complete High Efficiency DC/DC Power Module | |
|
|