| |
|
|
| Complete Current Share 10A DC/DC Power Module |
| |
| |
|
|
|
|
| Buy Direct from Intersil |
 |
|
|
| | | | ISL8200MIRZ |  |
|
|
|
|
|
|
|
|
|
|
 | ISL8200M | | Complete Current Share 10A DC/DC Power Module |
| | | VIN (min) (V) |  | 3 | | | VIN (max) (V) | | 20 | | | VOUT (min) (V) | | .6 | | | VOUT (max) (V) | | 6 | | | IOUT (max) (A) | | 10 | | | Iq (ľA) | | 36000 | | | Switching Frequency (MHz) | | .7 | | | Peak Efficiency (%) | | 94 | | | POR | | N | | | BOM Total Footprint | | * | |
| |
| Key Features |
-
Complete Switch Mode Power Supply in One Package
-
Patented Current Share Architecture Reduces Layout Sensitivity When Modules are Paralleled
-
Programmable Phase Shift (1 to 6 phase)
-
Extremely Low Profile (2.2mm height)
-
Input Voltage Range +3.0 V to +20V at 10A, Current Share up to 60A
-
A Single Resistor Sets VOUT from +0.6V to +6V
-
Output Overvoltage, Overcurrent and Over-Temperature, Built-in Protection and Undervoltage indication
|
|
| Description |
The ISL8200M is a simple and easy to use high power, current-sharing DC\DC power module for Datacom\Telecom\FPGA power hungry applications. All that is needed is the ISL8200M, a few passive components and one VOUT setting resistor to have a complete 10A design ready for market. The ease of use virtually eliminates the design and manufacturing risks while dramatically improving time to market.
Need more output current? Just simply parallel up to six ISL8200M modules to scale up to a 60A solution.
The simplicity of the ISL8200M is in its "Off The Shelf", unassisted implementation. Patented current sharing in multi-phase operation greatly reduces ripple currents, BOM cost and complexity.
The ISL8200M’s thermally enhanced, compact QFN package, operates at full load and over-temperature, without requiring forced air cooling. It's so thin it can even fit on the back side of the PCB. Easy access to all pins with few external components, reduces the PCB design to a component layer and a simple ground layer. |
|
 iBuy direct from Intersil |  iBuy direct - out of stock |  Request samples |  Check distributor inventory |  Available in RoHS/Pb-Free | | | |
| Part No. | Design-In
Status | Temp. | Package | MSL | Price
US $ | | | | | |
|
| ISL8200MEVAL2PHZ |
Active |
|
Eval Board |
N/A |
Contact Us |
 |
|
 |
|
|
|
| ISL8200MIRZ |
Active |
Ind |
23 Ld QFN |
3 |
15.86 |
|  |
|
|
|
|
| ISL8200MIRZ-T |
Active |
Ind |
23 Ld QFN T+R |
3 |
15.86 |
| |
|
|
|
|
| The price listed is the manufacturer's suggested retail price for quantities of 1K units. However, prices in today's market are fluid and may change without notice. |
| MSL = Moisture Sensitivity Level - per IPC/JEDEC J-STD-020 |
| SMD = Standard Microcircuit Drawing |
|
| Datasheet(s): | | | Evaluation Board(s): | | | |
|
|
| Applications | - Servers, Telecom and Datacom Applications
- Industrial and Medical Equipment
- Point of Load Regulation
|
|
| | ISL8201M | | 10A, High Efficiency DC/DC Module | | | ISL8204M | | Complete High Efficiency DC/DC Power Module | | | ISL8206M | | Complete High Efficiency DC/DC Power Module | |
|
|
Related Devices
