Device Information
 
 
ISL8112 Printer Friendly Version
 
High Light-Load Efficiency, Dual-Output, Main Power Supply Controllers
 
Datasheets,
Related Docs
& Simulations
DescriptionKey
Features
Parametric
Data
Related
Devices
 
 
Ordering Information
 iBuy direct from Intersil  iBuy direct - out of stock  Request samples
 Check distributor inventory Green/Pb(Lead free) Device  Available in RoHS/Pb-Free  
Part No. Design-In
Status
Temp. Package MSL Price
US $
PB Free
ISL8112IRZ Active Ind 32 Ld QFN 3 2.31 PB Free Out of stock Disti-Buy Sample
ISL8112IRZ-T Active Ind 32 Ld QFN T+R 3 2.31 PB Free Disti-Buy  
The price listed is the manufacturer's suggested retail price for quantities of 1K units. However, prices in today's market are fluid and may change without notice.
MSL = Moisture Sensitivity Level - per IPC/JEDEC J-STD-020
SMD = Standard Microcircuit Drawing
 
  Description

ISL8112 is a dual-output Synchronous Buck controller with 2A integrated driver. It features high light load efficiency which is especially preferred in systems concerned with high efficiency in wide load range, like the battery powered system. ISL8112 includes two constant on-time PWM controllers. Either of the two outputs can operate in output fixed mode or adjustable mode. In fixed mode, one output can be 5V or 3.3V and the other can output 1.5V or 1.05V. In output adjustable mode, one output can be 0.7V to 5.5V, and the other output can range from 0V to 2.5V (sensing output voltage directly) or up to 5V (using resistor divider voltage for voltage sensing). This device also features a linear regulator providing 3.3V/5V, or adjustable from 0.7V to 4.5V via LDOREF. The linear regulator provides up to 100mA output current with automatic linear-regulator bootstrapping to the BYP input. When in switch over, the LDO output can source up to 200mA. ISL8112 includes on-board power-up sequencing, the powergood (PGOOD_) outputs, digital soft-start, and internal softstop output discharge that prevents negative voltages on shutdown.

ISL8112 is implemented with constant on-time PWM control scheme which need no sense resistors and provides 100ns response to load transients while maintaining a relatively constant switching frequency. The unique ultrasonic pulseskipping mode maintains the switching frequency above 25kHz, eliminating undesired audible noises in low frequency operation at light load. Other features include pulse skipping which maximizes efficiency in light-load applications, and fixed-frequency PWM mode which reduces RF interference in sensitive applications.

 
  Key Features
 
  • Wide Input Voltage Range 5.5V to 25V
  • Constant ON-TIME Control with 100ns Load-Step Response
  • Dual Fixed Outputs of 1.05V (3.3V) and 1.5V (5.0V), or Adjustable Outputs of 0.7V to 5.5V (SMPS1) and 0V to 2.5V/5V (SMPS2), ±1.5% Accuracy
  • Adjustable Switching Frequency: 400/500kHz, 300/400kHz, 200/300kHz
  • Very High Light Load Efficiency (Skip Mode)
  • 5mW Quiescent Power Dissipation
  • ±1.5%(LDO): 100mA, 200mA(Switch Over)
  • 3.3V Reference Voltage ±2.0%: 5mA
  • 2.0V Reference Voltage ±1.0%: 50μA
  • Temperature Compensated rDS(ON) Current Sensing
  • Programmable Current Limit with Foldback Capability
  • Selectable PWM, Skip or Ultrasonic Mode
  • Independent PGOOD1 and PGOOD2 Comparators
  • Soft-Start with Pre-Biased Output and Soft-Stop
  • 1.7ms Digital Soft-Start and Independent Shutdown
  • Independent ENABLE
  • Thermal Shutdown
  • Extremely Low Components Count
  • Pb-Free Plus Anneal Available (RoHS Compliant)
Related Documentation
 
Datasheet(s)   Datasheet(s):
 
  Parametric Data
VIN (min) (V)4.5
VIN (max) (V)25
VOUT (min) (V).7
VOUT (max) (V)5.5
IOUT (max) (A)30
Switching Freq. (kHz)400/500, 300/400, 200/300
 
 
Applications
 
  • Power Supply for Telecom/Datacom and POL
  • System Requiring High Efficiency in Wide Load Range
  • Compact Design with Minimum Components Count
  • PDAs and Mobile Communication Devices
  • 3- and 4-Cell Li+ Battery-Powered Devices
  • DDR1, DDR2, and DDR3 Applications
 
  Related DevicesParametric Table   Parametric Table
 
 ISL6225 Dual Mobile-Friendly PWM Controller with DDR Memory Option 
 ISL6227 Dual Mobile-Friendly PWM Controller with DDR Option 
 ISL6228 High-Performance Dual-Output Buck Controller for Notebook Applications 
 ISL6440 300kHz Dual, 180° Out-of-Phase, Step-Down PWM Controller 
 ISL6445 1.4MHz Dual, 180° Out-of-Phase, Step-Down PWM Controller 
 ISL6530 Dual 5V Synchronous Buck Pulse-Width Modulator (PWM) Controller for DDRAM Memory VDDQ and VTTTermination 
 ISL6539 Wide Input Range Dual PWM Controller with DDR Option 
 ISL8120 Dual/n-Phase Buck PWM Controller with Integrated Drivers 

 

About Us | Careers | Contact Us | Investors | Legal | Privacy | Site Map | Subscribe | Intranet

©2003-2009. Intersil Americas Inc. All rights reserved.