| |
|
|
| Radiation Hardened, High Performance Industry Standard Single-Ended Current Mode PWM Controller |
| |
| |
|
|
 | ISL78843ASRH | | Radiation Hardened, High Performance Industry Standard Single-Ended Current Mode PWM Controller |
|  | | DSCC SMD |  | 5962-07249 | | | Class | | V, Q, /PROTO | | | High Dose Rate (HDR) krad(Si) | | 100 | | | Low Dose Rate (ELDRS) krad(Si) | | in Qualification | | | SEL MeV/mg/cm2 | | 86 | |
| |
| Key Features |
-
Electrically Screened to DSCC SMD # 5962-07249
-
QML Qualified Per MIL-PRF-38535 Requirements
-
1A MOSFET Gate Driver
-
90μA Typ Start-up Current, 125μA Max
-
35ns Propagation Delay Current Sense to Output
-
Fast Transient Response with Peak Current Mode Control
-
9V to 13.2V Operation
-
Adjustable Switching Frequency to 1MHz
-
50ns Rise and Fall Times with 1nF Output Load
-
Trimmed Timing Capacitor Discharge Current for Accurate Deadtime/Maximum Duty Cycle Control
-
1.5MHz Bandwidth Error Amplifier
-
Tight Tolerance Voltage Reference Over Line, Load and Temperature
-
±3% Current Limit Threshold
-
Pb-Free Available (RoHS Compliant)
|
|
| Description |
The ISL7884xASRH is a high performance, radiation hardened drop-in replacement for the popular 28C4x and 18C4x PWM controllers suitable for a wide range of power conversion applications including boost, flyback, and isolated output configurations. Its fast signal propagation and output switching characteristics make this an ideal product for existing and new designs.
Features include up to 13.2V operation, low operating current, 90μA typ start-up current, adjustable operating frequency to 1MHz, and high peak current drive capability with 50ns rise and fall times.
Specifications for Rad Hard QML devices are controlled by the Defense Supply Center in Columbus (DSCC). The SMD numbers listed in the ordering information must be used when ordering.
Detailed Electrical Specifications for the ISL788xASRH are contained in SMD 5962-07249. A “hot-link” is provided on our website for downloading. |
|
 iBuy direct from Intersil |  iBuy direct - out of stock |  Request samples |  Check distributor inventory |  Available in RoHS/Pb-Free | | | |
| Part No. | Design-In
Status | Temp. | Package | MSL | SMD/VID |
Price
US $ | | | | | |
|
| ISL78843ASRHQD |
Active |
Mil |
8 Ld SBDIP |
N/A |
5962R0724903QPC |
Contact Us |
 |
|
 |
|
|
|
| ISL78843ASRHQF |
Active |
Mil |
8 Ld FlatPack |
N/A |
5962R0724903QXC |
Contact Us |
|
|
|
|
|
|
| ISL78843ASRHVD |
Active |
Mil |
8 Ld SBDIP |
N/A |
5962R0724903VPC |
Contact Us |
|
|
|
|
|
|
| ISL78843ASRHVF |
Active |
Mil |
8 Ld FlatPack |
N/A |
5962R0724903VXC |
Contact Us |
|
|
|
|
|
|
| The price listed is the manufacturer's suggested retail price for quantities of 1K units. However, prices in today's market are fluid and may change without notice. |
| MSL = Moisture Sensitivity Level - per IPC/JEDEC J-STD-020 |
| SMD/VID = Standard Microcircuit Drawing/Vendor Item Drawing |
|
| Datasheet(s): | | | SMD Datasheet(s): | | | Technical Homepage: | | | SEE Test Report(s): | | | |
|
|
| Applications | - Current Mode Switching Power Supplies
- Isolated Buck and Flyback Regulators
- Boost Regulators
- Direction and Speed Control in Motors
- Control of High Current FET Drivers
|
|
| | HS-1825ARH | | High-Speed, Dual Output PWM | | | IS-1825ASRH | | High-Speed, Dual Output PWM | | | IS-1845ASRH | | High Speed, Current Mode PWM | | | ISL71823ASRH | | High-Speed, Dual Output PWM | | | ISL78840ASRH | | Radiation Hardened, High Performance Industry Standard Single-Ended Current Mode PWM Controller | | | ISL78841ASRH | | Radiation Hardened, High Performance Industry Standard Single-Ended Current Mode PWM Controller | | | ISL78845ASRH | | Radiation Hardened, High Performance Industry Standard Single-Ended Current Mode PWM Controller | |
|
|
Related Devices
