| |
|
| |
| 80V/1.25A Peak High-Frequency Half Bridge Driver with TTL Logic Inputs |
| |
|
| |
| |
| Ordering Information |
|
 |
 |
|
iBuy direct from Intersil
|
iBuy direct - out of stock
|
Request samples
|
Check distributor inventory
|
Available in RoHS/Pb-Free
|
|
 |
|
 |
 |
Part No. |
Design-In Status |
Temp. |
Package |
MSL |
Price US $ |
 |
 |
 |
 |
 |
 | ISL6700EVAL1Z |
Active |
|
Eval Board |
N/A |
Contact Us |
 |
|
 |
  |
 |
 | ISL6700IBZ |
Active |
Ind |
8 Ld SOIC |
1 |
1.20 |
 |
 |
 |
 |
 |
 | ISL6700IBZ-T |
Active |
Ind |
8 Ld SOIC T+R |
1 |
1.20 |
 |
|
 |
  |
 |
 | ISL6700IRZ |
Active |
Ind |
12 Ld QFN |
3 |
1.21 |
 |
 |
 |
 |
 |
 | ISL6700IRZ-T |
Active |
Ind |
12 Ld QFN T+R |
3 |
1.21 |
 |
|
 |
  |
 |
 | ISL6700EVAL1 |
InActive |
|
Eval Board |
N/A |
N/A |
| |
|
  |
 |
 | ISL6700IB |
InActive |
Ind |
8 Ld SOIC |
1 |
N/A |
| |
|
  |
 |
 | ISL6700IB-T |
InActive |
Ind |
8 Ld SOIC T+R |
1 |
N/A |
| |
|
  |
 |
 | ISL6700IR |
InActive |
Ind |
12 Ld QFN |
1 |
N/A |
| |
|
  |
 |
 | ISL6700IR-T |
InActive |
Ind |
12 Ld QFN T+R |
1 |
N/A |
| |
|
  |
 |
| The price listed is the manufacturer's suggested retail price for quantities of 1K units. However, prices in today's market are fluid and may change without notice. |
| MSL = Moisture Sensitivity Level - per IPC/JEDEC J-STD-020 |
| SMD = Standard Microcircuit Drawing |
|
| |
Description |
 |
The ISL6700 is an 80V/1.25A peak, medium frequency, low cost, half-bridge driver IC available in 8-lead SOIC and 12-lead QFN plastic packages. The low-side and high-side gate drivers are independently controlled and matched to 25ns. This gives the user maximum flexibility in dead-time selection and driver protocol. Undervoltage protection on both the low-side and high-side supplies force the outputs low. Non-latching, level-shift translation is used to control the upper drive circuit. Unlike some competitors, the high-side output returns to its correct state after a momentary undervoltage of the high-side supply. |
| |
Key Features |
 |
| |
-
Drives 2 N-Channel MOSFETs in Half-Bridge Configuration
-
Space Saving SO8 and Low RC-S QFN Packages
-
Phase Supply Max Voltage to 80VDC
-
Bootstrap Supply Max Voltage to 96VDC
-
Drives 1000pF Load with Rise and Fall Times Typ. 15ns
-
TTL/CMOS Compatible Input Thresholds
-
Independent Inputs for Non-Half-Bridge Topologies
-
No Start-Up Problems
-
Low Power Consumption
-
Wide Supply Range
-
Supply Undervoltage Protection
-
QFN Package
-
Compliant to JEDEC PUB95 MO-220 QFN
-
Quad Flat No Leads - Package Outline
-
Pb-Free Available (RoHS Compliant)
|
| Related Documentation |
 |
| |
Datasheet(s): |
| | |
Technical Brief(s): |
| | |
Evaluation Board(s): |
| | | |
| |
Parametric Data |
 | | Max Bootstrap Supply Voltage (V) |  | 95 |  | | Max Bias Voltage (V) |  | 15 |  | | Peak Pull-up Current (A) |  | 1.4 |  | | Peak Pull-down Current (A) |  | 1.3 |  | | Turn-On Prop Delay (ns) |  | 70 |  | | Turn-Off Prop Delay (ns) |  | 60 |  | | Rise Time (ns) |  | 5 |  | | Fall Time (ns) |  | 5 |  |
|
| |
Application Block Diagrams |
 |
| |
|
| |
| |
| Applications |
 |
| |
- Telecom/Datacom Power Supplies
- Half-Bridge Converters
- Two-Switch Forward Converters
- Active Clamp Forward Converters
|
| |
|
 |
| |
| | HIP2100 | | 100V/2A Peak High-Frequency Half Bridge Driver with CMOS Logic Inputs | | | HIP2101 | | 100V/2A Peak High-Frequency Half Bridge Driver with TTL Logic Inputs | | | ISL2100A | | 100V, 2A Peak, High Frequency Half-Bridge Drivers | | | ISL2101A | | 100V, 2A Peak, High Frequency Half-Bridge Drivers | | | ISL2110 | | 100V, 3A/4A Peak, High Frequency Half-Bridge Drivers | | | ISL2111 | | 100V, 3A/4A Peak, High Frequency Half-Bridge Drivers | | | ISL89400 | | 100V, 1.25A Peak, High Frequency Half-Bridge Drivers | | | ISL89401 | | 100V, 1.25A Peak, High Frequency Half-Bridge Drivers | |
|