The price listed is the manufacturer's suggested retail price for quantities of 1K units. However, prices in today's market are fluid and may change without notice.
MSL = Moisture Sensitivity Level - per IPC/JEDEC J-STD-020
SMD = Standard Microcircuit Drawing
Description
The ISL6421 is a highly integrated solution for supplying power and control signals from advanced satellite set-top box (STB) modules to the low noise block (LNB). This device is comprised of a current-mode boost PWM and a low-noise linear regulator, along with the circuitry required for I2C device interfacing and for providing DiSEqCTM standard control signals to the LNB.
A regulated output voltage is available at the output terminal (VOUT) to support the operation of the antenna port in advanced satellite STB applications. The regulated output may be set to either 13V or 18V by use of the voltage select command (VSEL) through the I2C bus. Additionally, to compensate for the voltage drop in the coaxial cable, the voltage may be increased by 1V with the line length compensation (LLC) feature. An enable command sent on the I2C bus provides standby mode control for the PWM and linear combination, disabling the output to conserve power.
A current-mode boost converter provides the linear regulator with an input voltage that is set to the required output voltage, plus 1.2V (typ.) to insure minimum power dissipation. This maintains a constant voltage drop across the linear pass element, while permitting an adequate voltage range for tone injection.
The device is capable of providing 450mA (typ.).
Key Features
Switch-Mode Power Converter for Lowest Dissipation
Boost PWM with >92% Efficiency
Selectable 13V or 18V Outputs
Digital Cable Length Compensation (1V)
External Pin to Select 13V/18V Options
I2C Compatible Interface for Remote Device Control
Registered Slave Address 0001 00XX
Fully Functional 3.3V, 5V Operation up to 400kHz
Built-In Tone Oscillator Factory Trimmed to 22kHz
Facilitates DiSEqC (EUTELSAT) Encoding
Internal Over-Temperature Protection and Diagnostics
Internal Overload and Overtemp Flags (Visible on I2C)
LNB Short-Circuit Protection and Diagnostics
QFN Package
Compliant to JEDEC PUB95 MO-220 QFN - Quad Flat No Leads - Product Outline