| |
|
| |
| Dual Output LNB Supply and Control Voltage Regulator with I2C Interface for Advanced Satellite Set-top Box Designs |
| |
|
| |
| |
| Ordering Information |
|
 |
 |
|
 iBuy direct from Intersil
|
 iBuy direct - out of stock
|
 Request samples
|
 Check distributor inventory
|
Available in RoHS/Pb-Free
|
|
|
|
|
|
|
Part No. |
Design-In
Status |
Temp. |
Package |
MSL |
Price
US $ |
|
|
|
|
|
|
| ISL6405ERZ |
Active |
Extended Comm |
32 Ld QFN |
2 |
2.51 |
 |
 |
 |
 |
|
|
| ISL6405ERZ-T |
Active |
Extended Comm |
32 Ld QFN T+R |
2 |
2.51 |
|
|
|
|
|
|
| ISL6405EVAL1 |
Active |
|
Eval Board |
N/A |
Contact Us |
| |
|
|
|
|
| ISLUSBI2CKIT1Z |
Active |
|
Eval Board |
N/A |
Contact Us |
|
|
|
|
|
|
| ISL6405EEB |
InActive |
Extended Comm |
28 Ld EPSOIC |
1 |
N/A |
| |
|
|
|
|
| ISL6405EEB-T |
InActive |
Extended Comm |
28 Ld EPSOIC T+R |
1 |
N/A |
| |
|
|
|
|
| ISL6405EEBZ |
InActive |
Extended Comm |
28 Ld EPSOIC |
3 |
N/A |
|
|
|
|
|
|
| ISL6405EEBZ-T |
InActive |
Extended Comm |
28 Ld EPSOIC T+R |
3 |
N/A |
|
|
|
|
|
|
| ISL6405ER |
InActive |
Extended Comm |
32 Ld QFN |
1 |
N/A |
| |
|
|
|
|
| ISL6405ER-T |
InActive |
Extended Comm |
32 Ld QFN T+R |
1 |
N/A |
| |
|
|
|
|
| ISL6405EVAL2 |
InActive |
|
Eval Board |
N/A |
N/A |
| |
|
|
|
|
| ISL6405I2C-KIT-EVAL |
InActive |
|
Eval Board |
N/A |
N/A |
| |
|
|
|
|
| The price listed is the manufacturer's suggested retail price for quantities of 1K units. However, prices in today's market are fluid and may change without notice. |
| MSL = Moisture Sensitivity Level - per IPC/JEDEC J-STD-020 |
| SMD = Standard Microcircuit Drawing |
|
| |
 Description |
|
|
The ISL6405 is a highly integrated voltage regulator and interface IC, specifically designed for supplying power and control signals from advanced satellite set-top box (STB) modules to the low noise blocks (LNBs) of two antenna ports. The device is comprised of two independent currentmode boost PWMs and two low-noise linear regulators along with the circuitry required for 22kHz tone generation, modulation and I2C device interface. The device makes the total LNB supply design simple, efficient and compact with low external component count.
Two independent current-mode boost converters provide the linear regulators with input voltages that are set to the final output voltages, plus typically 1.2V to insure minimum power dissipation across each linear regulator. This maintains constant voltage drops across each linear pass element while permitting adequate voltage range for tone injection.
The final regulated output voltages are available at two output terminals to support simultaneous operation of two antenna ports for dual tuners. The outputs for each PWM are set to 13V or 18V by independent voltage select commands (VSEL1, VSEL2) through the I2C bus. Additionally, to compensate for the voltage drop in the coaxial cable, the selected voltage may be increased by 1V with the line length compensation (LLC) feature. All the functions on this IC are controlled via the I2C bus by writing 8 bits on System Register (SR, 8 bits). The same register can be read back, and two bits will report the diagnostic status. Separate enable commands sent on the I2C bus provide independent standby mode control for each PWM and linear combination, disabling the output into shutdown mode.
Each output channel is capable of providing 750mA of continuous current. The overcurrent limit can be digitally programmed. The SEL18V pin with QFN package allows the 13V to 18V transition with an external pin, over-riding the I2C input. |
| |
 Key Features |
|
|
| |
-
Single Chip Power solution
-
True Dual Operation for 2-Tuner/2-Dish Applications
-
Both Outputs May be Enabled Simultaneously at Maximum Power
-
Integrated DC-DC Converter and I2C Interface
-
Switch-Mode Power Converter for Lowest Dissipation
-
Boost PWMs with > 92% Efficiency
-
Selectable 13V or 18V Outputs
-
Digital Cable Length Compensation (1V)
-
I2C Compatible Interface for Remote Device Control
-
Registered Slave Address 0001 00XX
-
Full 3.3V/5V Operation up to 400kHz
-
External Pins to Select 13V/18V Options
-
Available with QFN Package Only
-
Built-In Tone Oscillator Factory Trimmed to 22kHz
-
Facilitates DiSEqCTM (EUTELSAT) Encoding
-
Internal Over-Temperature Protection and Diagnostics
-
Internal Overload and Overtemp Flags (Visible on I2C)
-
LNB Short-Circuit Protection and Diagnostics
-
QFN Package
-
Compliant to JEDEC PUB95 MO-220 QFN - Quad Flat No Leads - Product Outline
-
Near Chip-Scale Package Footprint
-
Pb-free Packaging Available
-
Designated with "Z" Suffix (Refer to Note Below)
|
| Related Documentation |
|
|
| |
 Application Note(s): |
|
| |
 Datasheet(s): |
| | |
 Evaluation Board(s): |
| | |
 Technical Homepage: |
| | | |
| |
 Parametric Data |
| | VIN (min) (V) | | 8 | | | VIN (max) (V) | | 14 | | | VOUT (min) (V) | | 13 | | | VOUT (max) (V) | | 18 | | | IOUT (max) (mA) | | 750 | | | IBIAS (min) (mA) | | 1.5 | |
|
| |
 Application Block Diagrams |
|
| |
|
| |
| |
| Applications |
|
| |
- LNB Power Supply and Control for Satellite Set-Top Box
|
| |
|
|
| |
| | ISL6421 | | Single Output LNB Supply and Control Voltage Regulator with I2C Interface for Advanced Satellite Set-top Box Designs | | | ISL6421A | | Single Output LNB Supply and Control Voltage Regulator with I2C Interface for Advanced Satellite Set-top Box Designs | | | ISL6422 | | Dual Output LNB Supply and Control Voltage Regulator with I2C Interface for Advanced Satellite Set-Top Box Designs | | | ISL6422B | | Dual Output LNB Supply and Control Voltage Regulator with I2C Interface for Advanced Satellite Set-Top Box Designs | | | ISL6424 | | Dual Output LNB Supply and Control Voltage Regulator with I2C Interface for Advanced Satellite Set-Top Box Designs | | | ISL6425 | | Single Output LNB Supply and Control Voltage Regulator with I2C Interface for Advanced Satellite Set-top Box Designs | |
|
