Device Information
 
 
ISL6293 Printer Friendly Version
 
Li-ion/Li Polymer Battery Charger Accepting Two Power Sources
 
Datasheets,
Related Docs
& Simulations
DescriptionKey
Features
Parametric
Data
Application
Diagrams
Related
Devices
 
 
Ordering Information
 iBuy direct from Intersil  iBuy direct - out of stock  Request samples
 Check distributor inventory Green/Pb(Lead free) Device  Available in RoHS/Pb-Free  
Part No. Design-In
Status
Temp. Package MSL Price
US $
PB Free
ISL6293-2CRZ Active Comm 10 Ld DFN 2 1.33 PB Free Out of stock Disti-Buy Sample
ISL6293-2CRZ-T Active Comm 10 Ld DFN T+R 2 1.33 PB Free Disti-Buy  
ISL6293-2EVAL1 Active   Eval Board N/A Contact Us   Disti-Buy  
ISL6293-2CR InActive Comm 10 Ld DFN 1 N/A      
ISL6293-2CR-T To Be
Discontinued
Comm 10 Ld DFN T+R 1 1.33      
The price listed is the manufacturer's suggested retail price for quantities of 1K units. However, prices in today's market are fluid and may change without notice.
MSL = Moisture Sensitivity Level - per IPC/JEDEC J-STD-020
SMD = Standard Microcircuit Drawing
 
  Description

The ISL6293 is a fully integrated low-cost single-cell Li-ion or Li-polymer battery charger. The charger accepts two power inputs, normally one from a USB (Universal Serial Bus) port and another one from a desktop cradle. The ISL6293 is an ideal charger for smart handheld devices that need to communicate with a personal computer via USB.

The ISL6293 features 28V and 7V maximum voltages for the cradle and the USB inputs respectively. The 28V rating allows low-cost adapters be safely used. When both inputs are powered, the cradle input is used to charge the battery. The charge current is independently programmable for both inputs with two small resistors. One additional USBP pin allows the selection of high-power or low-power port for the USB input. The charger is self-protected against over temperature. If the die temperature rises above 100°C, a thermal foldback function reduces the charge current automatically to prevent further temperature rise. The charger preconditions the battery with low current when the battery voltage is below 2.6V. The charger has two indication pins. The PPR (power present) pin outputs an open-drain logic LOW when either the cradle or the USB input power is attached. The CHG (charge) pin is also an open-drain output that indicates a logic LOW when the charge current is above a minimum current level. When the charge current is below the minimum current, the charger remains in operation but the CHG pin indicates a logic HIGH signal. For simplicity, the charger does not have re-charge or timer functions.

 
  Key Features
 
  • Complete Charger for Single-Cell Li-ion/Polymer Batteries
  • Accept Two Power Sources
  • Low Component Count
  • Integrated Pass Element
  • Integrated Charge-Current Sensor with 10% Accuracy
  • No External Blocking Diode Required
  • Charge Current Thermal Foldback for Thermal Protection
  • 28V Maximum Voltage for the Cradle Input
  • Charge Indication
  • Adapter Presence Indication
  • Less than 1µA Leakage Current off the Battery when No Input Power Attached
  • Ambient Temperature Range: -40°C to 85°C
  • Thermally-Enhanced 3x3 DFN Package
  • Pb-free Available
Related Documentation
 
Datasheet(s)   Datasheet(s):
 
Technical Brief(s)   Technical Brief(s):
 
Evaluation Board(s)   Evaluation Board(s):
 
 
  Parametric Data
VOUT (typ) (V)4.2
Voltage Accuracy (%)1
VIN1 (max) (V)28
VIN2 (max) (V) 5.5
IOUT1 (max) (A)1
IOUT2 (max) (A).5
Safety TimerN
Self TerminationN
Accepts CC AdapterN
VIN1 Trickle Charge (min) (% CC)9.2
VIN2 Trickle Charge (min) (% CC)8
Thermal RegulationY
Functions
(Pin)
Enable, Charge Status
 
  Application Block Diagrams
 
 
 
Applications
 
  • Smart Handheld Devices
  • Cell Phones, PDAs, MP3 Players
  • Digital Still Cameras
  • Handheld Test Equipment
 
  Related DevicesParametric Table   Parametric Table
 
 ISL6291 Li-ion/Li Polymer Linear Battery Charger 
 ISL6292 Li-ion/Li Polymer Battery Charger 
 ISL6292B Li-ion/Li Polymer Battery Charger 
 ISL6292C Li-ion/Li Polymer Battery Charger 
 ISL6292D Li-ion/Li Polymer Battery Charger 
 ISL6294 High Input Voltage Charger 
 ISL6294A High Input Voltage Charger 
 ISL6297 Li-ion/Li Polymer Battery Charger 
 ISL6298 Li-ion/Li-Polymer Battery Charger 
 ISL6299A Li-ion/Li-Polymer Battery Charger Accepting Two Power Sources 
 ISL9201 Li-ion Battery Charger 
 ISL9203A Li-ion/Li Polymer Battery Charger 
 ISL9203R5220 Li-ion/Li Polymer Battery Charger 
 ISL9204 High Input Voltage Charger 
 ISL9205 Li-ion Battery Charger 
 ISL9205A Li-ion Battery Charger 
 ISL9205B Li-ion Battery Charger 
 ISL9205C Li-ion Battery Charger 
 ISL9205D Li-ion Battery Charger 
 ISL9214 Li-ion/Li-Polymer Battery Charger Accepting Two Power Sources 
 ISL9214A Li-ion/Li-Polymer Battery Charger Accepting Two Power Sources 
 ISL9219 Li-ion Battery Charger 
 ISL9221 Dual Input Lithium Ion Battery Charger with OVP USB Bypass and 10mA LDO 
 ISL9222A High Input Voltage Charger 
 ISL9228 Dual Input Li-ion/Li-Polymer Battery Charger With Battery Removal Detection 
 ISL9301 High Input Voltage Charger With Power Path Management 

 

About Us | Careers | Contact Us | Investors | Legal | Privacy | Site Map | Subscribe | Intranet

©2003-2009. Intersil Americas Inc. All rights reserved.