The price listed is the manufacturer's suggested retail price for quantities of 1K units. However, prices in today's market are fluid and may change without notice.
MSL = Moisture Sensitivity Level - per IPC/JEDEC J-STD-020
SMD = Standard Microcircuit Drawing
Description
This IC targets dual voltage hot swap applications across the +2.5V to +3.3V (nominal) bias supply voltage range with a second lower voltage rail down to less than 1V. It features a charge pump for driving external N-Channel MOSFETs, regulated current protection and duration, output undervoltage monitoring and reporting, optional latch-off or retry response, and adjustable soft-start.
The current regulation level (CR) for each rail is set by two external resistors and each CR duration is set by an external capacitor on the TIM pin. After the CR duration has expired the IC then quickly pulls down the associated GATE(s) output turning off its external FET(s). The ISL6173 offers a latched output or indefinite auto retry mode of operation.
Key Features
Fast Current Regulation amplifier quickly responds to overcurrent fault conditions
Less than 1µs response Time to Dead Short
Programmable Current Regulation Level and Duration
Two Levels of Overcurrent Detection Provide Fast Response to Varying Fault Conditions
Overcurrent Circuit Breaker and Fault Isolation functions
Adjustable Current Regulation Threshold as low as 20mV
Selectable Latch-off or Auto Retry Response to Fault conditions
Adjustable voltage ramp-up for In-rush Protection During Turn-On
Rail Independent Control, Monitoring and Reporting I/O
Dual Supply Hot Swap Power Distribution Control to <1V
Charge Pump Allows the use of N-Channel MOSFETs
QFN Package:
Compliant to JEDEC PUB95 MO-220 QFN - Quad Flat No Leads - Package Outline
Near Chip Scale Package footprint, which improves PCB efficiency and has a thinner profile
Technical Brief(s):