The ISL59832 is a dual channel, single supply video driver with reconstruction filter and charge pump. It is designed to drive SDTV displays with S-Video (Y/C) signals. It operates on a single supply (3.0V to 3.6V) and generates its own negative supply (-1.5V) using a regulated charge pump. Input signals can be AC- or DC-coupled. When AC-coupled, the sync tip clamp sets the blank level to ground at the output of Channel 1 thus ensuring that the sync-tip voltage level is set to approximately -300mV at the back-termination resistor of a standard video load. Channel 1 also has a sync detector whose output is available at SYNC_OUT pin. In a typical application where the luma is connected to Channel 1, and chrominance is connected to Channel 2, SYNC_IN is connected to SYNC_OUT thus providing timing to Channel 2. Channel 2 has a keyed clamp which sets the output to ground when SYNC_IN is driven to the logic high state. The ISL59832 is capable of driving two DC- or AC-coupled standard video loads. The ISL59832 features a 4th order Butterworth reconstruction filter that provides a 9MHz nominal -3dB frequency and 40dB of attenuation at 27MHz. Nominal operational current is 31mA. When powered down, the device draws 1μA maximum supply current. The ISL59832 is available in 16 Ld TQFN package.

• 3.3V Nominal Supply, Operates Down to 3.0V
• DC-Coupled Outputs
• Inputs can be AC- or DC-Coupled
• Eliminates the Need for Large Output Coupling Capacitors
• Integrated Sync Tip Clamp sets Backporch to Ground at the Output For Channel 1 for 1V_P-P Standard Video Signal
• Integrated Keyed Clamp Puts Channel 2 Output to Ground During Sync
• Each Output Drives 2 Standard Video Loads
• Response Flat to 5MHz, with 40dB Attenuation at 27MHz
• Pb-Free (RoHS compliant)

• Set Top Box Receiver
• Television
• DVD Player