| |
|
| |
| Dual, High Speed MOSFET Driver |
| |
|
| |
| |
| Ordering Information |
|
 |
 |
|
iBuy direct from Intersil
|
iBuy direct - out of stock
|
Request samples
|
Check distributor inventory
|
Available in RoHS/Pb-Free
|
|
 |
|
 |
 |
Part No. |
Design-In Status |
Temp. |
Package |
MSL |
Price US $ |
 |
 |
 |
 |
 |
 | ISL55110EVAL1Z |
Active |
|
Eval Board |
N/A |
Contact Us |
 |
|
 |
  |
 |
 | ISL55110EVAL2Z |
Active |
|
Eval Board |
N/A |
Contact Us |
 |
|
 |
  |
 |
 | ISL55110IRZ |
Active |
Ind |
16 Ld QFN |
1 |
0.80 |
 |
 |
 |
 |
 |
 | ISL55110IRZ-T |
Active |
Ind |
16 Ld QFN T+R |
1 |
0.85 |
 |
|
 |
  |
 |
 | ISL55110IVZ |
Active |
Ind |
8 Ld TSSOP |
1 |
0.80 |
 |
 |
 |
 |
 |
 | ISL55110IVZ-T |
Active |
Ind |
8 Ld TSSOP T+R |
1 |
0.85 |
 |
|
 |
  |
 |
| The price listed is the manufacturer's suggested retail price for quantities of 1K units. However, prices in today's market are fluid and may change without notice. |
| MSL = Moisture Sensitivity Level - per IPC/JEDEC J-STD-020 |
| SMD = Standard Microcircuit Drawing |
|
| |
Description |
 |
The ISL55110 and ISL55111 are dual high speed MOSFET drivers intended for applications requiring accurate pulse generation and buffering. Target applications include Ultrasound, CCD Imaging, Automotive Piezoelectric distance sensing and clock generation circuits.
With a wide output voltage range and low ON-resistance, these devices can drive a variety of resistive and capacitive loads with fast rise and fall times, allowing high speed operation with low skew, as required in large CCD array imaging applications.
The ISL55110 and ISL55111 are compatible with 3.3V and 5V logic families and incorporate tightly controlled input thresholds to minimize the effect of input rise time on output pulse width. The ISL55110 has a pair of in-phase drivers while the ISL55111 has two drivers operating in antiphase. Both inputs of the device have independent inputs to allow external time phasing if required.
The ISL55110 has a power-down mode for low power consumption during equipment standby times, making it ideal for portable products.
The ISL55110 and ISL55111 are available in 16 Ld Exposed pad QFN packaging and 8 Ld TSSOP. Both devices are specified for operation over the full -40°C to +85°C temperature range. |
| |
Key Features |
 |
| |
-
5V to 12V Pulse Magnitude
-
High Current Drive 3.5A
-
6ns Minimum Pulse Width
-
1.5ns Rise and Fall Times, 100pF Load
-
Low Skew
-
3.3V and 5V Logic Compatible
-
In-Phase and Anti-Phase Outputs
-
Small QFN and TSSOP Packaging
-
Low Quiescent Current
-
Pb-free (RoHS compliant)
|
| Related Documentation |
 |
| |
Datasheet(s): |
| | |
Evaluation Board(s): |
| | |
Technical Homepage: |
| | |
Design Model(s): |
| | | |
| |
Parametric Data |
 | | # of Drivers |  | 2 |  | | Max Operating Frequency (MHz) |  | 100 |  | | Peak Output IPK (A) |  | 3.5 |  | | Rise Time (ns) |  | 1.5 |  | | Fall Time (ns) |  | 1.5 |  | | Turn On Delay (ns) |  | 40 (QFN Only) |  | | Turn Off Delay (ns) |  | 40 (QFN Only) |  | | IS (mA) |  | 3.5 |  | | RON (Ω) |  | 3 |  | | Input Signal Range (V) |  | 0 to VP |  | | Input Supply Range (VP) |  | +2.7 to +5.5 |  | | Max Input Signal (V) |  | 5.5 |  | | Output Signal Range (V) |  | 0 to +13.2 |  | | Max Output Signal Range (V) |  | 13.2 |  |
|
| |
Application Block Diagrams |
 |
| |
|
| |
| |
| Applications |
 |
| |
- Ultrasound MOSFET Driver
- CCD Array Horizontal Driver
- Automotive Piezo Driver Applications
- Clock Driver Circuits
|
| |
|
 |
| |
| | EL7154 | | High Speed, Monolithic Pin Driver | | | EL7155 | | High Performance Pin Driver | | | EL7156 | | High Performance Pin Driver | | | EL7158 | | Ultra-High Current Pin Driver | | | EL7457 | | 40MHz Non-Inverting Quad CMOS Driver | | | HIP9011 | | Engine Knock Signal Processor | | | ISL55100A | | Quad 18V Pin Electronics Driver/Window Comparator | | | ISL55100B | | Quad 18V Pin Electronics Driver/Window Comparator | | | ISL55111 | | Dual, High Speed MOSFET Driver | | | ISL55112 | | High-Speed Dual Precision CCD Driver | |
|