| |
|
| |
| Quad 18V Pin Electronics Driver/Window Comparator |
| |
|
| |
| |
| Ordering Information |
|
 |
 |
|
 iBuy direct from Intersil
|
 iBuy direct - out of stock
|
 Request samples
|
 Check distributor inventory
|
Available in RoHS/Pb-Free
|
|
|
|
|
|
|
Part No. |
Design-In
Status |
Temp. |
Package |
MSL |
Price
US $ |
|
|
|
|
|
|
| ISL55100AEVAL3Z |
Active |
|
Eval Board |
N/A |
Contact Us |
 |
|
 |
|
|
|
| ISL55100AIRZ |
Active |
Ind |
72 Ld QFN |
3 |
14.17 |
|
 |
|
 |
|
|
| ISL55100AIRZ-T |
Active |
Ind |
72 Ld QFN T+R |
3 |
14.21 |
|
|
|
|
|
|
| ISL55100AEVAL1 |
InActive |
|
Eval Board |
N/A |
N/A |
| |
|
|
|
|
| ISL55100AEVAL3 |
InActive |
|
Eval Board |
N/A |
N/A |
| |
|
|
|
|
| The price listed is the manufacturer's suggested retail price for quantities of 1K units. However, prices in today's market are fluid and may change without notice. |
| MSL = Moisture Sensitivity Level - per IPC/JEDEC J-STD-020 |
| SMD = Standard Microcircuit Drawing |
|
| |
 Description |
|
|
The ISL55100A is a Quad pin driver and window comparator fabricated in a wide voltage CMOS process. It is designed specifically for Test During Burn In (TDBI) applications, where cost, functional density, and power are all at a premium.
This IC incorporates four channels of programmable drivers and window comparators into a small 72 Ld QFN package. Each channel has independent driver levels, data, and high impedance control. Each receiver has dual comparators which provide high and low threshold levels.
The ISL55100A uses differential mode digital inputs, and can therefore mate directly with LVDS or CML outputs. Single ended logic families are handled by connecting one of the digital input pins to an appropriate threshold voltage (e.g., 1.4V for TTL compatibility). The comparator outputs are single-ended, and the output levels are user defined to mate directly with any digital technology.
The 18V driver output and receiver input ranges allow this device to interface directly with TTL, ECL, CMOS (3V, 5V, and 7V), LVCMOS, and custom level circuitry, as well as the high voltage (Super Voltage) level required for many special test modes for Flash Devices. |
| |
 Key Features |
|
|
| |
-
Low Driver Output Resistance
-
ROUT Maximum: ISL55100A 7.0Ω
-
18V I/O Range
-
50MHz Operation
-
4-Channel Driver/Receiver Pairs with Per Pin Flexibility
-
Dual Level - Per Pin - Input Thresholds
-
Differential or Single-Ended Digital Inputs
-
User Defined Comparator Output Levels
-
Low Channel-to-Channel Timing Skew
-
Small Footprint (72 Ld QFN)
-
Pb-Free (RoHS Compliant)
|
| Related Documentation |
|
|
| |
 Datasheet(s): |
| | |
 Evaluation Board(s): |
| | |
 Technical Homepage: |
| | | |
| |
 Parametric Data |
| | # of Drivers | | 4 | | | Max Operating Frequency (MHz) | | 65 | | | Peak Output IPK (A) | | 1 | | | Rise Time (ns) | | 2.5 | | | Fall Time (ns) | | 2.5 | | | Turn On Delay (ns) | | 18 | | | Turn Off Delay (ns) | | 18 | | | IS (mA) | | 70 | | | RON (Ω) | | 5 | | | Input Signal Range (V) | | -VP to +VP | | | Input Supply Range (VP) | | -18 to +18 | | | Max Input Signal (V) | | 18 | | | Output Signal Range (V) | | -VP to +VP | | | Max Output Signal Range (V) | | 18 | |
|
| |
 Application Block Diagrams |
|
| |
|
| |
| |
| Applications |
|
| |
- Burn In ATE
- Wafer Level Flash Memory Test
- LCD Panel Test
- Low Cost ATE
- Instrumentation
- Emulation
- Device Programmers
|
| |
|
|
| |
| | EL7154 | | High Speed, Monolithic Pin Driver | | | EL7155 | | High Performance Pin Driver | | | EL7156 | | High Performance Pin Driver | | | EL7158 | | Ultra-High Current Pin Driver | | | ISL55100B | | Quad 18V Pin Electronics Driver/Window Comparator | | | ISL55110 | | Dual, High Speed MOSFET Driver | | | ISL55111 | | Dual, High Speed MOSFET Driver | |
|
