Device Information
 
 
ISL54220 Printer Friendly Version
 
High-Speed USB 2.0 (480Mbps) Multiplexer
 
Datasheets,
Related Docs
& Simulations
DescriptionKey
Features
Parametric
Data
Application
Diagrams
Related
Devices
 
 
Ordering Information
 iBuy direct from Intersil  iBuy direct - out of stock  Request samples
 Check distributor inventory Green/Pb(Lead free) Device  Available in RoHS/Pb-Free  
Part No. Design-In
Status
Temp. Package MSL Price
US $
PB Free
ISL54220IRTZ Active Ind 10 Ld TDFN 1 0.44 PB Free Disti-Buy Sample
ISL54220IRTZ-T Active Ind 10 Ld TDFN T+R 1 0.47 PB Free Buy Direct Disti-Buy  
ISL54220IRUEVAL1Z Active   Eval Board N/A Contact Us PB Free Disti-Buy  
ISL54220IRUZ-T Active Ind 10 Ld uTQFN T+R 1 0.47 PB Free Buy Direct Disti-Buy Sample
ISL54220IUZ Active Ind 10 Ld MSOP 1 0.44 PB Free Disti-Buy Sample
ISL54220IUZ-T Active Ind 10 Ld MSOP T+R 1 0.47 PB Free Buy Direct Disti-Buy  
The price listed is the manufacturer's suggested retail price for quantities of 1K units. However, prices in today's market are fluid and may change without notice.
MSL = Moisture Sensitivity Level - per IPC/JEDEC J-STD-020
SMD = Standard Microcircuit Drawing
 
  Description

The Intersil ISL54220 is a single supply dual 2:1 multiplexer that can operate from a single 2.7V to 5.5V supply. It contains two SPDT (Single Pole/Double Throw) switches configured as a DPDT. The part was designed for switching or routing of USB High-Speed signals and/or USB Full-speed signals in portable battery powered products.

The 6.7Ω switches can swing rai-to-rail and were specifically designed to pass USB full speed data signals that range from 0V to 3.3V and USB high speed data signals that range from 0V to 400mV. They have high bandwidth and low capacitance to pass USB high speed data signals with minimal distortion.

The part can be used in Personal Media Players and other portable battery powered devices that need to route USB high-speed signals or full-speed signals to different transceiver sections of the device while connected to a single USB host (computer).

The digital logic inputs are 1.8V logic compatible when operated with a 2.7V to 3.6V supply. The ISL54220 has an output enable pin to open all the switches. It can be used to facilitate proper bus disconnect and connection when switching between the USB sources.

The ISL54220 is available in 10 Ld 1.8mmx1.4mm μTQFN, 10 Ld TDFN and 10 Ld MSOP packages. It operates over a temperature range of -40 to +85°C.

 
  Key Features
 
  • High-Speed (480Mbps) and Full-Speed (12Mbps) Signaling Capability per USB 2.0
  • 1.8V Logic Compatible (2.7V to +3.6V supply)
  • Enable Pin to Open all Switches
  • Power OFF Protection
  • D-/D+ Pins Overvoltage Tolerant to 5.5V
  • -3dB Frequency 742MHz
  • Low ON Capacitance 7.4pF
  • Low ON-Resistance 6.7Ω
  • Single Supply Operation (VDD) 2.7V to 5.5V
  • Available in μTQFN, TDFN, and MSOP Packages
  • Pb-Free (RoHS Compliant)
  • Compliant with USB 2.0 Short Circuit and Overvoltage Requirements Without Additional External Components
Related Documentation
 
Datasheet(s)   Datasheet(s):
 
Evaluation Board(s)   Evaluation Board(s):
 
Technical Homepage   Technical Homepage:
 
 
  Parametric Data
ConfigurationHS/HS
Switch ControlLogic Level
BW High (MHz)742
BW Full (MHz)742
VDD (V)2.7 to 5.5
IS (μA).03
 
  Application Block Diagrams
 
 
 
Applications
 
  • MP3 and other Personal Media Players
  • Cellular/Mobile Phones
  • PDA's
  • Digital Cameras and Camcorders
  • USB Switching
 
  Related DevicesParametric Table   Parametric Table
 
 ISL54200 USB 2.0 High/Full Speed Multiplexer 
 ISL54221 High-Speed USB 2.0 (480Mbps) Multiplexer 
 ISL54222 High-Speed USB 2.0 (480Mbps) Multiplexer 
 ISL54222A High-Speed USB 2.0 (480Mbps) Multiplexer 
 ISL54223 High-Speed USB 2.0 (480Mbps) Multiplexer 
 ISL54230 Octal Multiprotocol Switch 
 ISL76120 Automotive Grade USB 2.0 High/Full Speed Multiplexer 

 

About Us | Careers | Contact Us | Investors | Legal | Privacy | Site Map | Subscribe | Intranet

©2003-2009. Intersil Americas Inc. All rights reserved.