ISL54213 MP3/USB 2.0 High Speed Switch with Negative Signal Handling and Mute Function

ISL54213

Printer Friendly Version

MP3/USB 2.0 High Speed Switch with Negative Signal Handling and Mute Function

Datasheets,
Related Docs
& Simulations

Ordering Information

iBuy direct from Intersil	iBuy direct - out of stock	Request samples
Check distributor inventory	Available in RoHS/Pb-Free

Part No.

Design-In
Status

Temp.

Package

MSL

Price
US $

ISL54213IRTZ

Active

Ind

10 Ld TDFN

0.56

ISL54213IRTZ-T

Active

Ind

10 Ld TDFN T+R

0.60

ISL54213IRUZ-T

Active

Ind

10 Ld uTQFN T+R

0.60

The price listed is the manufacturer's suggested retail price for quantities of 1K units. However, prices in today's market are fluid and may change without notice.

MSL = Moisture Sensitivity Level - per IPC/JEDEC J-STD-020

SMD = Standard Microcircuit Drawing

Description

The Intersil ISL54213 dual SPDT (Single Pole/Double Throw) switch combines low distortion audio and accurate USB 2.0 high speed data (480Mbps) signal switching in the same low voltage device. When operated with a 2.5V to 5.0V single supply, this analog switch allows audio signal swings below ground, allowing the use of a common USB and audio headphone connector in Personal Media Players and other portable battery-powered devices.

The ISL54213 logic control pins are 1.8V compatible, which allows for control via a standard μcontroller.

The part has an audio enable control pin to open all switches and put the part in a mute state. It's high off-isolation (95dB @ 100kHz) provides superior muting of audio signals.

The ISL54213 is available in a small 10 Ld 2.1mmx1.6mm ultra-thin μTQFN package and a 10 Ld 3mmx3mm TDFN package. It operates over a temperature range of -40°C to +85°C.

Key Features

High Speed (480Mbps) and Full Speed (12Mbps) Signaling Capability per USB 2.0
Low Distortion Negative Signal Capability
Mute Function
Low Distortion Headphone Audio Signals
- THD+N at 1mW into 32Ω Load <0.013%
Crosstalk (100kHz) -95dB
OFF-isolation (100kHz) 95dB
Single Supply Operation (VDD) 2.5V to 5.0V
-3dB Bandwidth USB Switch 736MHz
Available in μTQFN and TDFN Packages
Compliant with USB 2.0 Short Circuit Requirements Without Additional External Components
Pb-Free (RoHS Compliant)

Related Documentation

Datasheet(s):
MP3/USB 2.0 High Speed Switch with Negative Signal Handling and Mute Function

Technical Homepage:
Intersil Analog Switches, Analog Multiplexers, and Crosspoint Switches

Parametric Data


Configuration		USB/MP3

Switch Control		V_BUS

Click and Pop Circuitry		N

Audio Input Range (V)		±1.5

Audio THD 32Ω (%)		.06

BW USB (MHz)		736

V_DD (V)		2.7 to 5.0

I_S Active/PDN (μA)		6.0/0.001

Application Block Diagrams

Applications

MP3 and other Personal Media Players
Cellular/Mobile Phones
PDAs
Audio/USB Switching

Related Devices

Parametric Table

	ISL54205A		MP3/USB 2.0 High Speed Switch with Negative Signal Handling
	ISL54205B		MP3/USB 2.0 High Speed Switch with Negative Signal Handling
	ISL54206		MP3/USB 2.0 High Speed Switch with Negative Signal Handling
	ISL54206A		MP3/USB 2.0 High Speed Switch with Negative Signal Handling
	ISL54207		Low Voltage, Dual SPDT, USB/CVBS/Audio Switches, with Negative Signal Capability
	ISL54208		Low Voltage, Dual SPDT, USB/CVBS/Audio Switches, with Negative Signal Capability
	ISL54209		MP3/USB 2.0 High Speed Switch with Negative Signal Handling and Low Power Shutdown
	ISL54210		MP3/USB 2.0 High Speed Switch with Negative Signal Handling/Click and Pop Suppression
	ISL54211		MP3/USB 2.0 High Speed Switch with Negative Signal Handling/Click and Pop Suppression
	ISL54212		MP3/USB 2.0 High Speed Switch with Negative Signal Handling
	ISL54214		USB 2.0 High-Speed x 2Channels/Stereo Audio Dual SP3T (Dual 3 to 1 Multiplexer)
	ISL54215		MP3/USB 2.0 High Speed Switch with Negative Signal Handling and Low Power Shutdown
	ISL54217		USB 2.0 High-Speed x 2Channels/Stereo Audio Dual SP3T (Dual 3 to 1 Multiplexer)
	ISL54409		Audio/USB 2.0 Wired-OR Switch with Click and Pop Reduction