The Intersil ISL54208 dual SPDT (Single Pole/Double Throw) switches combine low distortion audio/video and accurate USB 2.0 high speed (480Mbps) data signal switching in the same low voltage device. When operated with a 2.7V to 3.6V single supply these analog switches allow audio/video signal swings below-ground, allowing the use of a common USB and audio/video connector in digital cameras, camcorders and other portable battery powered Personal Media Player devices.

The ISL54208 logic control pins are 1.8V logic compatible which allows control via a standard μcontroller. With a VDD voltage in the range of 2.7V to 3.6V the IN pin voltage can exceed the VDD rail allowing for the USB 5V VBUS voltage from a computer to directly drive the IN pin to switch between the audio/video and USB signal sources in the portable device. The part has an enable control pin to open all the switches and put the part in a low power state.

The ISL54208 is available in a small 10 Ld 2.1mmx1.6mm ultra-thin μTQFN package and a 10 Ld 3mmx3mm TDFN package. It operates over a temperature range of -40 to +85°C.

• High Speed (480Mbps) Signaling Capability per USB 2.0
• Low Distortion Negative Signal Capability
• Control Pin to Open all Switches and Enter Low Power State
• Low Distortion Mono Audio Signal
  • THD+N at 20mW into 32Ω Load <0.1%
• Low Distortion Color Video Signal
  • Differential Gain 0.28%
  • Differential Phase 0.04°
• Cross-talk NCx Channels (4MHz) -78dB
• Single Supply Operation (V_DD) 1.8V to 5.5V
• -3dB Bandwidth USB NOx Switches 630MHz
• Available in μTQFN and TDFN Packages
• Pb-Free Plus Anneal (RoHS Compliant)
• Compliant with USB 2.0 Short Circuit Requirements Without Additional External Components

• Digital Camera and Camcorders
• Video MP3 and other Personal Media Players
• Cellular/Mobile Phones
• PDA's
• Audio/Video/USB Switching