Device Information
 
 
ISL54207 Printer Friendly Version
 
Low Voltage, Dual SPDT, USB/CVBS/Audio Switches, with Negative Signal Capability
 
Datasheets,
Related Docs
& Simulations		DescriptionKey
Features		Parametric
Data		Application
Diagrams		Related
Devices
 
 
Ordering Information
 iBuy direct from Intersil  iBuy direct - out of stock  Request samples
 Check distributor inventory Green/Pb(Lead free) Device  Available in RoHS/Pb-Free  
Part No. Design-In
Status		 Temp. Package MSL Price
US $		 PB Free
ISL54207EVAL1Z Active   Eval Board N/A Contact Us PB Free Disti-Buy  
ISL54207IRUZ-T Active Ind 10 Ld uTQFN T+R 1 1.28 PB Free Buy Direct Disti-Buy Sample
ISL54207IRZ Active Ind 10 Ld TDFN T+R 2 1.23 PB Free Out of stock Disti-Buy Sample
ISL54207IRZ-T Active Ind 10 Ld TDFN T+R 2 1.28 PB Free Disti-Buy  
The price listed is the manufacturer's suggested retail price for quantities of 1K units. However, prices in today's market are fluid and may change without notice.
MSL = Moisture Sensitivity Level - per IPC/JEDEC J-STD-020
SMD = Standard Microcircuit Drawing
 
  Description

The Intersil ISL54207 dual SPDT (Single Pole/Double Throw) switches combine low distortion audio/video and accurate USB 2.0 high speed (480Mbps) data signal switching in the same low voltage device. When operated with a 2.7V to 3.6V single supply, these analog switches allow audio/video signal swings below-ground, allowing the use of a common USB and audio/video connector in digital cameras, camcorders and other portable battery powered Personal Media Player devices.

The ISL54207 incorporates circuitry for detection of the USB VBUS voltage, which is used to switch between the audio/video and USB signal sources in the portable device. The part has a control pin to open all the switches and put the part in a low power down state.

The ISL54207 is available in a small 10 Ld 2.1mmx1.6mm ultra-thin μTQFN package and a 10 Ld 3mmx3mm TDFN package. It operates over a temperature range of -40 to +85°C.

 
  Key Features
 
  • High Speed (480Mbps) Signaling Capability per USB 2.0
  • Low Distortion Negative Signal Capability
  • Detection of VBUS Voltage on USB Cable
  • Control Pin to Open all Switches and Enter Low Power State
  • Low Distortion Mono Audio Signal
    • THD+N at 20mW into 32Ω Load <0.1%
  • Low Distortion Color Video Signal
    • Differential Gain 0.28%
    • Differential Phase 0.04deg
  • Cross-talk (4MHz) -78dB
  • Single Supply Operation (VDD) 2.7V to 3.6V
  • -3dB Bandwidth USB Switch 630MHz
  • Available in μTQFN and TDFN Packages
  • Pb-Free Plus Anneal Available (RoHS Compliant)
  • Compliant with USB 2.0 Short Circuit Requirements Without Additional External Components
Related Documentation
 
Application Note(s)   Application Note(s):
 
Datasheet(s)   Datasheet(s):
 
Technical Brief(s)   Technical Brief(s):
 
Evaluation Board(s)   Evaluation Board(s):
 
Technical Homepage   Technical Homepage:
 
 
  Parametric Data
ConfigurationUSB/Video
Switch ControlVBUS
Click and Pop CircuitryN
Audio Input Range (V)±1.5
Audio THD 32Ω (%).06
Video Diff Gain/Phase (%/°)0.28/0.04
BW USB (MHz)630
BW Video (MHz)338
VDD (V)2.7 to 3.6
IS Active/PDN (μA)6.0/0.001
 
  Application Block Diagrams
 
 
 
Applications
 
  • Digital Camera and Camcorders
  • Video MP3 and other Personal Media Players
  • Cellular/Mobile Phones
  • PDA's
  • Audio/Video/USB Switching
 
  Related DevicesParametric Table   Parametric Table
 
 ISL54205A MP3/USB 2.0 High Speed Switch with Negative Signal Handling 
 ISL54205B MP3/USB 2.0 High Speed Switch with Negative Signal Handling 
 ISL54206 MP3/USB 2.0 High Speed Switch with Negative Signal Handling 
 ISL54206A MP3/USB 2.0 High Speed Switch with Negative Signal Handling 
 ISL54208 Low Voltage, Dual SPDT, USB/CVBS/Audio Switches, with Negative Signal Capability 
 ISL54209 MP3/USB 2.0 High Speed Switch with Negative Signal Handling and Low Power Shutdown 
 ISL54210 MP3/USB 2.0 High Speed Switch with Negative Signal Handling/Click and Pop Suppression 
 ISL54211 MP3/USB 2.0 High Speed Switch with Negative Signal Handling/Click and Pop Suppression 
 ISL54212 MP3/USB 2.0 High Speed Switch with Negative Signal Handling 
 ISL54213 MP3/USB 2.0 High Speed Switch with Negative Signal Handling and Mute Function 
 ISL54214 USB 2.0 High-Speed x 2Channels/Stereo Audio Dual SP3T (Dual 3 to 1 Multiplexer) 
 ISL54215 MP3/USB 2.0 High Speed Switch with Negative Signal Handling and Low Power Shutdown 
 ISL54217 USB 2.0 High-Speed x 2Channels/Stereo Audio Dual SP3T (Dual 3 to 1 Multiplexer) 

 
About Us | Careers | Contact Us | Investors | Legal | Privacy | Site Map | Subscribe | Intranet

©2003-2009. Intersil Americas Inc. All rights reserved.