| |
|
| |
| Light-to-Digital Output Sensor with High Sensitivity, Gain Selection, Interrupt Function and I2C Interface |
| |
|
| |
| |
| Ordering Information |
|
 |
 |
|
 iBuy direct from Intersil
|
 iBuy direct - out of stock
|
 Request samples
|
 Check distributor inventory
|
Available in RoHS/Pb-Free
|
|
|
|
|
|
|
Part No. |
Design-In
Status |
Temp. |
Package |
MSL |
Price
US $ |
|
|
|
|
|
|
| ISL29003IROZ |
Active |
Ind |
6 Ld ODFN |
4OP |
1.12 |
 |
|
 |
|
|
|
| ISL29003IROZ-EVALZ |
Active |
|
Eval Board |
N/A |
Contact Us |
|
|
|
|
|
|
| ISL29003IROZ-T7 |
Active |
Ind |
6 Ld ODFN T+R |
4OP |
1.12 |
|
 |
|
|
|
|
| The price listed is the manufacturer's suggested retail price for quantities of 1K units. However, prices in today's market are fluid and may change without notice. |
| MSL = Moisture Sensitivity Level - per IPC/JEDEC J-STD-020 |
| SMD = Standard Microcircuit Drawing |
|
| |
 Description |
|
|
The ISL29003 is an integrated light sensors with a 16-bit integrating type ADC, I2C user programmable lux range select for optimized counts/lux, and I2C multi-function control and monitoring capabilities. The internal ADC provides 16-bit resolution while rejecting 50Hz and 60Hz flicker caused by artificial light sources.
In normal operation, power consumption is less than 300μA. Furthermore, an available software power-down mode controlled via the I2C interface reduces power consumption to less than 1μA.
The ISL29003 supports a hardware interrupt that remains asserted low until the host clears it through I2C interface. Designed to operate on supplies from 2.5V to 3.3V, the ISL29003 is specified for operation over the -40°C to +85°C ambient temperature range. |
| |
 Key Features |
|
|
| |
-
Range select via I2C
-
Range 1 = 0 lux to 1000 lux
-
Range 2 = 0 lux to 4000 lux
-
Range 3 = 0 lux to 16,000 lux
-
Range 4 = 0 lux to 64,000 lux
-
Human eye response (540nm peak sensitivity)
-
Temperature compensated
-
16-bit resolution
-
Adjustable resolution: up to 65 counts per lux
-
User-programmable upper and lower threshold interrupt
-
Simple output code, directly proportional to lux
-
IR + UV rejection
-
50Hz/60Hz rejection
-
2.5V to 3.3V supply
-
6 Ld ODFN (2.1mmx2mm)
-
Pb-free (RoHS compliant)
|
| Related Documentation |
|
|
| |
 Datasheet(s): |
| | |
 Technical Homepage: |
| | |
 Design Model(s): |
| | | |
| |
 Parametric Data |
| | Peak Sensitivity (nm) | | 550 | | | VS (Min) (V) | | 2.25 | | | VS (Max) (V) | | 3.63 | | | Supply Current (μA) | | 290 | | | Resolution (Bits) | | 16 | | | Lux Range (Max) (Lux) | | 64000 | | | Counts per Lux (Max) (Counts) | | 65 | | | Dark ADC Code @ EV = 0Lux (Max) (Count) | | 1 | | | Gain Selection? | | Y | | | Output Interface | | I2C | | | Address Selection Pins? | | N | | | Enable Pin? | | Software Enabled | | | Package Dimensions (mm) | | 2.0x2.1x0.70 | |
|
| |
| |
| Applications |
|
| |
- Ambient light sensing
- Backlight control
- Temperature control systems
- Contrast control
- Camera light meters
- Lighting controls
|
| |
|
|
| |
| | ISL29001 | | Light-to-Digital Sensor | | | ISL29002 | | Light-to-Digital I2C Sensor | | | ISL29004 | | Light-to-Digital Output Sensor with Address Selection, High Sensitivity, Gain Selection, Interrupt Function and I2C Interface | | | ISL29010 | | Light-to-Digital Output Sensor with High Sensitivity, Gain Selection, and I2C Interface | | | ISL29012 | | Light-to-Digital Output Sensor with High Sensitivity, Gain Selection, Interrupt Function and I2C Bus™ | | | ISL29013 | | Light-to-Digital Output Sensor with High Sensitivity, Gain Selection, Interrupt Function and I2C Interface | | | ISL29020 | | A Low Power, High Sensitivity, Light-to Digital Sensor With I2C Interface | | | ISL29023 | | Integrated Digital Ambient Light Sensor with Interrupt Function | |
|
