Device Information
 
 
ISL28248 Printer Friendly Version
 
4.5MHz, Dual Precision Rail-to-Rail Input-Output (RRIO) Op Amps with Very Low Input Bias Current
 
Datasheets,
Related Docs
& Simulations		DescriptionKey
Features		Parametric
Data		Related
Devices
 
 
Ordering Information
 iBuy direct from Intersil  iBuy direct - out of stock  Request samples
 Check distributor inventory Green/Pb(Lead free) Device  Available in RoHS/Pb-Free  
Part No. Design-In
Status		 Temp. Package MSL Price
US $		 PB Free
ISL28248FBZ Active Full-Range Ind 8 Ld SOIC 3 0.79 PB Free Buy Direct Disti-Buy Sample
ISL28248FBZ-T7 Active Full-Range Ind 8 Ld SOIC T+R 3 0.79 PB Free Disti-Buy  
ISL28248FUZ Active Full-Range Ind 8 Ld MSOP 2 0.79 PB Free Buy Direct Disti-Buy Sample
ISL28248FUZ-T7 Active Full-Range Ind 8 Ld MSOP T+R 2 0.79 PB Free Disti-Buy  
ISL28248SOICEVAL1Z Active   Eval Board N/A Contact Us PB Free Buy Direct Disti-Buy  
The price listed is the manufacturer's suggested retail price for quantities of 1K units. However, prices in today's market are fluid and may change without notice.
MSL = Moisture Sensitivity Level - per IPC/JEDEC J-STD-020
SMD = Standard Microcircuit Drawing
 
  Description

The ISL28148, ISL28248 and ISL28448 are 4.5MHz low-power single, dual and quad operational amplifiers. The parts are optimized for single supply operation from 2.4V to 5.5V, allowing operation from one lithium cell or two Ni-Cd batteries.

The single, dual and quad feature an Input Range Enhancement Circuit (IREC) which enables them to maintain CMRR performance for input voltages greater than the positive supply. The input signal is capable of swinging 0.25V above the positive supply and to 100mV below the negative supply with only a slight degradation of the CMRR performance. The output operation is rail-to-rail.

The parts draw minimal supply current (900μA per amplifier) while meeting excellent DC accuracy, AC performance, noise and output drive specifications. The ISL28148 features an enable pin that can be used to turn the device off and reduce the supply current to a maximum of 16μA. Operation is guaranteed over -40°C to +125°C temperature range.

 
  Key Features
 
  • 4.5MHz gain bandwidth product
  • 900μA supply current (per amplifier)
  • 1.8mV maximum offset voltage
  • 1pA typical input bias current
  • Down to 2.4V single supply operation
  • Rail-to-rail input and output
  • Enable pin (ISL28148 SOT-23 package only)
  • -40°C to +125°C operation
  • Pb-free (RoHS compliant)
Related Documentation
 
Datasheet(s)   Datasheet(s):
 
Evaluation Board(s)   Evaluation Board(s):
 
Technical Homepage   Technical Homepage:
 
 
  Parametric Data
BW (MHz)4.5
SR (V/μs)4
VS (min) (V)2.4
VS (max) (V)5.5
IS (per amp) (mA).9
Noise VN (nV/√Hz)28
IBIAS (μA).000001
VOS (max) (mV)1.8
# of Devices/ Channels2
IOUT (mA)68
VOUT (V)4.99
Rail-to-Rail InputY
Rail-to-Rail OutputY
PSRR (dB)98
CMRR (dB)98
Thermal ShutdownN
Gain AV (min)1
AVOL or AZOL (dB or V/mV)580
EnableY
 
 
Applications
 
  • Low-end audio
  • 4mA to 20mA current loops
  • Medical devices
  • Sensor amplifiers
  • ADC buffers
  • DAC output amplifiers
 
  Related DevicesParametric Table   Parametric Table
 
 CA3130A 15MHz, BiMOS Operational Amplifier with MOSFET Input/CMOS Output 
 CA3140 4.5MHz, BiMOS Operational Amplifier with MOSFET Input/Bipolar Output 
 CA3140A 4.5MHz, BiMOS Operational Amplifier with MOSFET Input/Bipolar Output 
 CA3240 Dual, 4.5MHz, BiMOS Operational Amplifier with MOSFET Input/Bipolar Output 
 CA3240A Dual, 4.5MHz, BiMOS Operational Amplifier with MOSFET Input/Bipolar Output 
 CA3260 4MHz, BiMOS Operational Amplifier with MOSFET Input/CMOS Output 
 CA3260A 4MHz, BiMOS Operational Amplifier with MOSFET Input/CMOS Output 
 CA3420 0.5MHz, Low Supply Voltage, Low Input Current BiMOS Operational Amplifiers 
 CA5260 Dual 3MHz, BiMOS Microprocessor Operational Amplifiers with MOSFET Input/CMOS Output 
 CA5260A Dual 3MHz, BiMOS Microprocessor Operational Amplifiers with MOSFET Input/CMOS Output 
 CA5420A 0.5MHz, Low Supply Voltage, Low Input Current BiMOS Operational Amplifiers 
 EL1516 Dual Ultra Low Noise Amplifier 
 EL1516A Dual Ultra Low Noise Amplifier 
 EL2125 Ultra-Low Noise, Low Power, Wideband Amplifier 
 EL2126 Ultra-Low Noise, Low Power, Wideband Amplifier 
 EL2227 Dual Very Low Noise Amplifier 
 EL2228 Dual Low Noise Amplifier 
 EL5100 200MHz Slew Enhanced VFA 
 EL5101 200MHz Slew Enhanced VFA 
 EL5176 200MHz Differential Twisted-Pair Driver 
 EL5300 200MHz Slew Enhanced VFA 
 EL5462 500MHz Low Power Current Feedback Amplifier 
 EL8170 Micropower, Single Supply, Rail-to-Rail Input-Output Instrumentation Amplifier 
 EL8171 Micropower, Single Supply, Rail-to-Rail Input-Output Instrumentation Amplifiers 
 EL8173 Micropower, Single Supply, Rail-to-Rail Input-Output Instrumentation Amplifier 
 EL8176 Micropower Single Supply Rail-to-Rail Input-Output Precision Op Amp 
 HA-2404 40MHz, PRAM Four Channel Programmable Amplifiers 
 HA-2625 100MHz, High Input Impedance, Very Wideband, Uncompensated Operational Amplifiers 
 HA-2640 4MHz, High Supply Voltage Operational Amplifiers 
 HA-2645 4MHz, High Supply Voltage Operational Amplifiers 
 HA-5102 Dual and Quad, 8MHz and 60MHz, Low Noise Operational Amplifiers 
 HA-5104 Dual and Quad, 8MHz and 60MHz, Low Noise Operational Amplifiers 
 HA-5127 8.5MHz, Ultra-Low Noise Precision Operational Amplifier 
 HA-5127A 8.5MHz, Ultra-Low Noise Precision Operational Amplifier 
 HA-5160 100MHz, JFET Input, High Slew Rate, Uncompensated, Operational Amplifiers 
 HA5023 Dual 125MHz Video Current Feedback Amplifier 
 HA5024 Quad 125MHz Video Current Feedback Amplifier with Disable 
 ICL7611 1.4MHz, Low Power CMOS Operational Amplifiers 
 ICL7612 1.4MHz, Low Power CMOS Operational Amplifiers 
 ICL7621 Dual/Quad, Low Power CMOS Operational Amplifiers 
 ISL28107 Precision Single Low Noise Operational Amplifier 
 ISL28117 40V Precision Low Power Operational Amplifiers 
 ISL28127 Precision Single and Dual Low Noise Operational Amplifiers 
 ISL28133 Single, Dual, and Quad Micropower, Zero-Drift, RRIO Operational Amplifiers 
 ISL28136 5MHz, Single Precision Rail-to-Rail Input-Output (RRIO) Op Amp 
 ISL28138 4.5MHz, Single Precision Rail-to-Rail Input-Output (RRIO) Op Amps with Very Low Input Bias Current 
 ISL28146 5MHz, Single Rail-to-Rail Input-Output (RRIO) Op Amps 
 ISL28148 4.5MHz, Single Precision Rail-to-Rail Input-Output (RRIO) Op Amps with Very Low Input Bias Current 
 ISL28156 39μA Micropower Single and Dual Precision Rail-to-Rail Input-Output (RRIO) Low Input Bias Current Op Amps 
 ISL28158 Micro-power Single and Dual Precision Rail-to-Rail Input-Output (RRIO) Low Input Bias Current Op Amps 
 ISL28166 39μA Micropower Single and Dual Rail-to-Rail Input-Output Low Input Bias Current (RRIO) Op Amps 
 ISL28168 34μA Micro-power Single Rail-to-Rail Input-Output (RRIO) Low Input Bias Current Op Amps 
 ISL28176 Single, Dual and Quad Micropower Single Supply Rail-to-Rail Input and Output (RRIO) Precision Op Amp 
 ISL28194 Ultra-Small, 330nA and 1μA Single Supply, Rail-to-Rail Input/Output (RRIO) Op Amps 
 ISL28195 Ultra-Small, 330nA and 1μA Single Supply, Rail-to-Rail Input/Output (RRIO) Op Amps 
 ISL28207 Precision Single and Dual Low Noise Operational Amplifiers 
 ISL28213 Dual General Purpose Micropower, RRIO Operational Amplifier 
 ISL28214 Dual General Purpose Micropower, RRIO Operational Amplifiers 
 ISL28217 40V Precision Low Power Operational Amplifiers 
 ISL28236 5MHz, Dual Precision Rail-to-Rail Input-Output (RRIO) Op Amp 
 ISL28246 5MHz, Dual Rail-to-Rail Input-Output (RRIO) Op Amps 
 ISL28258 Micro-power Single and Dual Precision Rail-to-Rail Input-Output (RRIO) Low Input Bias Current Op Amps 
 ISL28266 34μA Micro-power Single and Dual Rail-to-Rail Input-Output (RRIO) Low Input Bias Current Op Amps 
 ISL28268 34μA Micro-power Single and Dual Rail-to-Rail Input-Output (RRIO) Low Input Bias Current Op Amps 
 ISL28270 Dual Channel Micro-power, Single Supply, Rail-to-Rail Input and Output (RRIO) Instrumentation Amplifier 
 ISL28271 Dual Micropower, Single Supply, Rail-to-Rail Input and Output (RRIO) Instrumentation Amplifier 
 ISL28272 Dual Micropower, Single Supply, Rail-to-Rail Input and Output (RRIO) Instrumentation Amplifier 
 ISL28273 Dual Channel Micro-power, Single Supply, Rail-to-Rail Input and Output (RRIO) Instrumentation Amplifier 
 ISL28276 Dual Micropower Single Supply Rail-to-Rail Input and Output (RRIO) Precision Op Amp 
 ISL28278 Dual Micropower Single Supply Rail-to-Rail Input and Output (RRIO) Op-Amp 
 ISL28286 Dual Micropower Single Supply Rail-to-Rail Input and Output (RRIO) Precision Op Amp 
 ISL28288 Dual and Quad Micropower Single Supply Rail-to-Rail Input and Output (RRIO) Op Amp 
 ISL28413 Quad General Purpose Micropower, RRIO Operational Amplifier 
 ISL28414 Quad General Purpose Micropower, RRIO Operational Amplifiers 
 ISL28470 Quad Channel Micro-power, Single Supply, Rail-to-Rail Input and Output (RRIO) Instrumentation Amplifier 
 ISL28476 Quad Precision Micropower Single Supply Rail-to-Rail Input and Output Precision Op Amps 
 ISL28478 Quad Micropower Single Supply Rail-to-Rail Input and Output (RRIO) Op-Amp 
 ISL28486 Quad Micropower Single Supply Rail-to-Rail Input and Output (RRIO) Precision Op Amp 
 ISL28488 Dual and Quad Micropower Single Supply Rail-to-Rail Input and Output (RRIO) Op Amp 
 ISL59110 8MHz Rail-to-Rail Composite Video Driver 
 ISL59111 8MHz Rail-to-Rail Composite Video Driver 

 
About Us | Careers | Contact Us | Investors | Legal | Privacy | Site Map | Subscribe | Intranet

©2003-2009. Intersil Americas Inc. All rights reserved.