| |
|
| |
| Single Digitally Controlled Potentiometer (XDCP™), Low Noise, Low Power, SPIŪ Bus, 256 Taps |
| |
|
| |
| |
| Ordering Information |
|
 |
 |
|
 iBuy direct from Intersil
|
 iBuy direct - out of stock
|
 Request samples
|
 Check distributor inventory
|
Available in RoHS/Pb-Free
|
|
|
|
|
|
|
Part No. |
Design-In
Status |
Temp. |
Package |
MSL |
Price
US $ |
|
|
|
|
|
|
| ISL22414TFU10Z |
Active |
Full-Range Ind |
10 Ld MSOP |
1 |
1.51 |
 |
 |
 |
 |
|
|
| ISL22414TFU10Z-TK |
Active |
Full-Range Ind |
10 Ld MSOP T+R |
1 |
1.51 |
|
 |
|
|
|
|
| ISL22414UFU10Z |
Active |
Full-Range Ind |
10 Ld MSOP |
1 |
1.51 |
|
|
|
|
|
|
| ISL22414UFU10Z-TK |
Active |
Full-Range Ind |
10 Ld MSOP T+R |
1 |
1.51 |
|
|
|
|
|
|
| ISL22414WFU10Z |
Active |
Full-Range Ind |
10 Ld MSOP |
1 |
1.51 |
|
|
|
|
|
|
| ISL22414WFU10Z-TK |
Active |
Full-Range Ind |
10 Ld MSOP T+R |
1 |
1.51 |
|
|
|
|
|
|
| The price listed is the manufacturer's suggested retail price for quantities of 1K units. However, prices in today's market are fluid and may change without notice. |
| MSL = Moisture Sensitivity Level - per IPC/JEDEC J-STD-020 |
| SMD = Standard Microcircuit Drawing |
|
| |
 Description |
|
|
The ISL22414 integrates a single digitally controlled potentiometer (DCP), control logic and non-volatile memory on a monolithic CMOS integrated circuit.
The digitally controlled potentiometer is implemented with a combination of resistor elements and CMOS switches. The position of the wiper is controlled by the user through the SPI serial interface. The potentiometer has an associated volatile Wiper Register (WR) and a non-volatile Initial Value Register (IVR) that can be directly written to and read by the user. The contents of the WR control the position of the wiper. At power-up the device recalls the contents of the DCP's IVR to the WR.
The ISL22414 also has 14 General Purpose non-volatile registers that can be used as storage of lookup table for multiple wiper position or any other valuable information. The ISL22414 features a dual supply, that is beneficial for applications requiring a bipolar range for DCP terminals between V- and VCC.
The DCP can be used as three-terminal potentiometer or as two-terminal variable resistor in a wide variety of applications including control, parameter adjustments, and signal processing. |
| |
 Key Features |
|
|
| |
-
256 resistor taps
-
SPI serial interface with write/read capability
-
Daisy Chain Configuration
-
Shutdown mode
-
Non-volatile EEPROM storage of wiper position
-
14 General Purpose non-volatile registers
-
High reliability
-
Endurance: 1,000,000 data changes per bit per register
-
Register data retention: 50 years @ T ≤ +55°C
-
Wiper resistance: 70Ω typical @ 1mA
-
Standby current <2.5μA max
-
Shutdown current <2.5μA max
-
Dual power supply
-
VCC = 2.25V to 5.5V
-
V- = -2.25V to -5.5V
-
10kΩ, 50kΩ or 100kΩ total resistance
-
Extended industrial temperature range: -40 to +125°C
-
10 Lead MSOP
-
Pb-free plus anneal product (RoHS compliant)
|
| Related Documentation |
|
|
| |
 Application Note(s): |
|
| |
 Datasheet(s): |
| | |
 Technical Homepage: |
| | | |
| |
 Parametric Data |
| | # of Devices/ Channels | | 1 | | | # of Taps | | 256 | | | Memory Type | | Non-Volatile | | | Bus Interface Type | | SPI | | | Resistance Options (kΩ) | | 10, 50, 100 | | | VCC Range (V) | | 2.25 to 5.5 | | | VCC (min) (V) | | 2.25 | | | VCC (max) (V) | | 5.5 | | | DCP Dual Supply Range (V) | | -2.25 to -5.5 | | | DCP Single Supply Range (V) | | | | | Resistance Taper | | Linear | | | Wiper Current (mA) | | 3 | | | Wiper Resistance (Ω) | | 70 | | | Supply Current (μA) | | .2 | | | Max Operating Temp (°C) | | 125 | | | End-to-End Tempco (ppm/°C) | | 50 | | | Middlepoint Ratiometric Tempco (ppm/°C) | | 4 | | | VL min. terminal voltage (V) | | -5.5 | | | VH max. terminal voltage (V) | | 5.5 | | | Features | | Daisy Chainable to minimize # I/0 pins on microcontroller, dual supply required | |
|
| |
 Application Block Diagrams |
|
| |
|
| |
|
|
| |
| | ISL22313 | | Single Digitally Controlled Potentiometer (XDCP™), Low Noise, Low Power, I2CŪ Bus, 256 Taps | | | ISL95810 | | Single Digitally Controlled Potentiometer (XDCP™) | | | ISL95811 | | Single Digitally Controlled Potentiometer (XDCP™) | | | X9271 | | Single Digitally-Controlled (XDCP™) Potentiometer | | | X9279 | | Single Digitally-Controlled (XDCP™) Potentiometer | |
|
