Device Information
 
 
HSP45102 Printer Friendly Version
 
12-Bit NCO 28 SOIC, 40MHz, COMM
 
Datasheets,
Related Docs
& Simulations
DescriptionKey
Features
Parametric
Data
Related
Devices
 
 
Ordering Information
 iBuy direct from Intersil  iBuy direct - out of stock  Request samples
 Check distributor inventory Green/Pb(Lead free) Device  Available in RoHS/Pb-Free  
Part No. Design-In
Status
Temp. Package MSL Price
US $
PB Free
HSP45102SC-33 Active Comm 28 Ld SOIC 1 19.46   Disti-Buy  
HSP45102SC-33Z Active Comm 28 Ld SOIC 3 14.19 PB Free Disti-Buy  
HSP45102SC-40 Active Comm 28 Ld SOIC 1 17.75   Disti-Buy  
HSP45102SC-40Z Active Comm 28 Ld SOIC 3 16.94 PB Free Disti-Buy  
HSP45102SI-3396 Active Ind 28 Ld SOIC T+R 4 19.46   Disti-Buy  
HSP45102SI-33Z Active Ind 28 Ld SOIC 3 14.89 PB Free Disti-Buy  
HSP45102PC-33 InActive Comm 28 Ld PDIP N/A N/A      
HSP45102PC-40 InActive Comm 28 Ld PDIP N/A N/A      
HSP45102SC-3396 InActive Comm 28 Ld SOIC T+R   N/A      
HSP45102SI-33 InActive Ind 28 Ld SOIC 1 N/A      
The price listed is the manufacturer's suggested retail price for quantities of 1K units. However, prices in today's market are fluid and may change without notice.
MSL = Moisture Sensitivity Level - per IPC/JEDEC J-STD-020
SMD = Standard Microcircuit Drawing
 
  Description

The Intersil HSP45102 is Numerically Controlled Oscillator (NCO12) with 32-bit frequency resolution and 12-bit output. With over 69dB of spurious free dynamic range and worst case frequency resolution of 0.009Hz, the NCO12 provides significant accuracy for frequency synthesis solutions at a competitive price.

The frequency to be generated is selected from two frequency control words. A single control pin selects which word is used to determine the output frequency. Switching from one frequency to another occurs in one clock cycle, with a 6 clock pipeline delay from the time that the new control word is loaded until t4-he new frequency appears on the output.

Two pins, P0-1, are provided for phase modulation. They are encoded and added to the top two bits of the phase accumulator to offset the phase in 90° increments.

The 13-bit output of the Phase Offset Adder is mapped to the sine wave amplitude via the Sine ROM. The output data format is offset binary to simplify interfacing to D/A converters. Spurious frequency components in the output sinusoid are less than -69dBc.

The NCO12 has applications as a Direct Digital Synthesizer and modulator in low cost digital radios, satellite terminals, and function generators.

 
  Key Features
 
  • 33MHz, 40MHz Versions
  • 32-Bit Frequency Control
  • BFSK, QPSK Modulation
  • Serial Frequency Load
  • 12-Bit Sine Output
  • Offset Binary Output Format
  • 0.009Hz Tuning Resolution at 40MHz
  • Spurious Frequency Components <-69dBc
  • Fully Static CMOS
  • Low Cost
  • Pb-Free Plus Anneal Available (RoHS Compliant)
Related Documentation
 
Datasheet(s)   Datasheet(s):
 
Technical Brief(s)   Technical Brief(s):
 
Evaluation Board(s)   Evaluation Board(s):
 
Technical Homepage   Technical Homepage:
 
 
  Parametric Data
SubtypeNCO
Modulation FormatsQPSK, FSK
Input Rate (MSPS)40
Input Data (Bits)12
Spectral Purity (dBc)69
Frequency Resolution (Hz)0.009 @ 32-Bits
Output12-Bits, Sine 40MHz
FilteringNone
 
 
Applications
 
  • Direct Digital Synthesis
  • Modulation
  • PSK Communications
  • Related Products
    • HI5731 12-Bit, 100MHz D/A Converter
 
  Related DevicesParametric Table   Parametric Table
 
 HSP45116A Numerically Controlled Oscillator/Modulator 
 ISL5314 CommLink™ Direct Digital Synthesizer 

 

About Us | Careers | Contact Us | Investors | Legal | Privacy | Site Map | Subscribe | Intranet

©2003-2009. Intersil Americas Inc. All rights reserved.