Device Information
 
 
HSP43216 Printer Friendly Version
 
Halfband Filter
 
Datasheets,
Related Docs
& Simulations
DescriptionKey
Features
Parametric
Data
Related
Devices
 
 
Ordering Information
 iBuy direct from Intersil  iBuy direct - out of stock  Request samples
 Check distributor inventory Green/Pb(Lead free) Device  Available in RoHS/Pb-Free  
Part No. Design-In
Status
Temp. Package MSL Price
US $
PB Free
HSP43216JC-52 Active Comm 84 Ld PLCC 4 55.01   Disti-Buy  
HSP43216JC-52Z Active Comm 84 Ld PLCC 4 44.13 PB Free Disti-Buy Sample
HSP43216VC-52 Active Comm 100 Ld MQFP 4 55.01   Disti-Buy  
HSP43216VC-52Z Active Comm 100 Ld MQFP 3 42.13 PB Free Disti-Buy  
The price listed is the manufacturer's suggested retail price for quantities of 1K units. However, prices in today's market are fluid and may change without notice.
MSL = Moisture Sensitivity Level - per IPC/JEDEC J-STD-020
SMD = Standard Microcircuit Drawing
 
  Description

The HSP43216 Halfband Filter addresses a wide variety of applications by combining fS/4 (fS = sample frequency) quadrature up/down convert circuitry with a fixed coefficient halfband filter processor as shown in the block diagram. These elements may be configured to operate in one of the four following modes: decimate by 2 filtering of a real input signal; interpolate by 2 filtering of a real input signal; fS/4 quadrature down conversion of a real input signal followed by decimate-by-2 filtering to produce a complex analytic signal; interpolate-by-2 filtering of a complex analytic signal followed by fS/4 quadrature up conversion to produce a real valued output.

The frequency response of the HSP43216's halfband filter has a shape factor, (passband+transition band)/passband, of 1.24:1 with 90dB of stopband attenuation. The passband has less than 0.0003dB of ripple from 0fS to 0.2fS with stopband attenuation of greater than 90dB from 0.3fS to Nyquist. At 0.25fS the filter provides 6dB of attenuation.

The HSP43216 processes data streams with word widths up to 16-bits and data rates up to 52MSPS. The processing throughput of the part is easily doubled to rates of up to 104MSPS by using the part together with an external multiplexer or demultiplexer. Programmable rounding is provided to support output precisions from 8-bits to 16-bits.

 
  Key Features
 
  • Sample Rates to 52MSPS
  • Architected to Support Sample Rates to 104MSPS Using External Multiplexer
  • Four Modes of Operation:
    • Interpolate by 2 Filtering
    • Decimate by 2 Filtering
    • Quadrature to Real Signal Conversion
    • fS/4 Quadrature Down Conversion Followed by Decimate by 2 Filtering
  • 16-Bit Inputs and Outputs
  • 67-Tap Halfband FIR Filter with 20-Bit Coefficients
  • Two's Complement or Offset Binary Outputs
  • Programmable Rounding on Outputs
  • 1.24:1 Filter Shape Factor
  • >90dB Stopband Attenuation
  • <0.0003dB Passband Ripple
  • Saturation Logic on Output
  • Pb-Free Available (RoHS Compliant)
Related Documentation
 
Application Note(s)   Application Note(s):
 
Datasheet(s)   Datasheet(s):
 
Evaluation Board(s)   Evaluation Board(s):
 
Technical Homepage   Technical Homepage:
 
 
  Parametric Data
SubtypeHB
Max Attenuation (dB)90
Compute Rate (Taps/sec)3484
Data (Bits)16
Coefficient (Bits)20
Rate Change (Decimation or Interpolation)1/2 2
Control/μP InterfaceIndividual Control Lines
 
 
Applications
 
  • Digital Down Conversion
  • D/A and A/D pre/post Filtering
  • Tuning Bandwidth Expansion for HSP45116 and HSP45106
 
  Related DevicesParametric Table   Parametric Table
 
 HSP43124 Serial I/O Filter 
 HSP43168 Dual FIR Filter 
 HSP43220 Decimating Digital Filter 

 

About Us | Careers | Contact Us | Investors | Legal | Privacy | Site Map | Subscribe | Intranet

©2003-2009. Intersil Americas Inc. All rights reserved.