| |
|
| |
| High Speed, Monolithic Digital-To-Analog Converter |
| |
|
| |
| |
| Ordering Information |
|
 |
 |
|
 iBuy direct from Intersil
|
 iBuy direct - out of stock
|
 Request samples
|
 Check distributor inventory
|
Available in RoHS/Pb-Free
|
|
|
|
|
|
|
Part No. |
Design-In
Status |
Temp. |
Package |
MSL |
SMD/VID |
Price
US $ |
|
|
|
|
|
|
| HS0-565BRH-Q |
Active |
Mil |
Die (Military Visual) |
N/A |
5962R9675502V9A |
Contact Us |
 |
|
 |
|
|
|
| HS1-565BRH-Q |
Active |
Mil |
24 Ld SBDIP |
N/A |
5962R9675502VJC |
Contact Us |
|
|
|
|
|
|
| HS9-565BRH-Q |
Active |
Mil |
24 Ld FlatPack |
N/A |
5962R9675502VXC |
Contact Us |
|
|
|
|
|
|
| The price listed is the manufacturer's suggested retail price for quantities of 1K units. However, prices in today's market are fluid and may change without notice. |
| MSL = Moisture Sensitivity Level - per IPC/JEDEC J-STD-020 |
| SMD/VID = Standard Microcircuit Drawing/Vendor Item Drawing |
|
| |
 Description |
|
|
The HS-565BRH is a fast, radiation hardened 12-bit current output, digital-to-analog converter. This part replaces the HS-565ARH, which is no longer available. The monolithic chip includes a precision voltage reference, thin-film R-2R ladder, reference control amplifier and twelve high-speed bipolar current switches.
The Intersil Corporation Dielectric Isolation process provides latch-up free operation while minimizing stray capacitance and leakage currents, to produce an excellent combination of speed and accuracy. Also, ground currents are minimized to produce a low and constant current through the ground terminal, which reduces error due to code-dependent ground currents.
HS-565BRH die are laser trimmed for a maximum integral nonlinearity error of ±0.25 LSB at 25oC. In addition, the low noise buried zener reference is trimmed both for absolute value and minimum temperature coefficient.
Specifications for Rad Hard QML devices are controlled by the Defense Supply Center in Columbus (DSCC). The SMD numbers listed here must be used when ordering. Detailed Electrical Specifications for these devices are contained in SMD 5962-96755. A "hot-link" is provided on our website for downloading. |
| |
 Key Features |
|
|
| |
-
Electrically Screened to SMD # 5962-96755
-
QML Qualified per MIL-PRF-38535 Requirements
-
Total Dose 100 krad (Si) (Max)
-
DAC and Reference on a Single Chip
-
Pin Compatible with AD-565A and HI-565A
-
Very High Speed: Settles to 0.50 LSB in 500ns Max
-
Monotonicity Guaranteed Over Temperature
-
0.50 LSB Max Nonlinearity Guaranteed Over Temperature
-
Low Gain Drift (Max., DAC Plus Reference) 50ppm/oC
-
±0.75 LSB Accuracy Guaranteed Over Temperature (±0.125 LSB Typical at 25oC)
|
| Related Documentation |
|
|
| |
 Application Note(s): |
|
| |
 Datasheet(s): |
| | |
 SMD Datasheet(s): |
| | |
 Technical Homepage: |
| | | |
| |
 Parametric Data |
| | DSCC SMD | | 5962-96755 | | | Class | | V, Q, /PROTO | | | High Dose Rate (HDR) rad(Si) | | 100 | | | Low Dose Rate (ELDRS) | | In Qualification | | | SEL MeV/mg/cm2 | | SEL free | |
|
| |
| |
| Applications |
|
| |
- High Speed A/D Converters
- Precision Instrumentation
- Signal Reconstruction
|
| |
|
|
| |
| | HS-0546RH | | Single 16/Differential 8 Channel CMOS Analog Multiplexer with Active Overvoltage Protection | | | HS-0547RH | | Single 16/Differential 8 Channel CMOS Analog Multiplexer with Active Overvoltage Protection | | | HS-0548RH | | Single 8/Differential 4 Channel CMOS Analog Multiplexer with Active Overvoltage Protection | | | HS-1840ARH | | 16 Channel CMOS Analog Multiplexer with High-Z Analog Input Protection | | | HS-201HSRH | | Quad SPST CMOS Analog Switch | | | HS-302RH | | CMOS Dual DPST Analog Switch | | | HS-303ARH | | CMOS Dual SPDT Analog Switch | | | HS-303BRH | | CMOS Dual SPDT Analog Switch | | | HS-508BRH | | 8 Channel CMOS Analog Multiplexer with Overvoltage Protection | |
|
