Device Information
 
 
HS-4424BRH Printer Friendly Version
 
Dual, Non-Inverting Power MOSFET Driver
 
Datasheets,
Related Docs
& Simulations
DescriptionKey
Features
Parametric
Data
Application
Diagrams
Related
Devices
 
 
Ordering Information
 iBuy direct from Intersil  iBuy direct - out of stock  Request samples
 Check distributor inventory Green/Pb(Lead free) Device  Available in RoHS/Pb-Free  
Part No. Design-In
Status
Temp. Package MSL SMD/VID Price
US $
PB Free
HS0-4424BRH-Q Active Mil Die (Military Visual) N/A 5962F9956002V9A Contact Us PB Free Disti-Buy  
HS9-4424BRH-8 Active - 16 Ld FlatPack N/A 5962F9956002QXC Contact Us PB Free Disti-Buy  
HS9-4424BRH-Q Active - 16 Ld FlatPack N/A 5962F9956002VXC Contact Us PB Free Disti-Buy  
The price listed is the manufacturer's suggested retail price for quantities of 1K units. However, prices in today's market are fluid and may change without notice.
MSL = Moisture Sensitivity Level - per IPC/JEDEC J-STD-020
SMD/VID = Standard Microcircuit Drawing/Vendor Item Drawing
 
  Description

The Radiation Hardened HS-4424RH and HS-4424BRH are non-inverting, dual, monolithic high-speed MOSFET drivers designed to convert TTL level signals into high current outputs at voltages up to 18V.

The inputs of these devices are TTL compatible and can be directly driven by our HS-1825ARH PWM device or by our ACS/ACTS and HCS/HCTS type logic devices. The fast rise times and high current outputs allow very quick control of high gate capacitance power MOSFETs, like our Rad Hard FS055, in high frequency applications.

The high current outputs minimize power losses in MOSFETs by rapidly charging and discharging the gate capacitance. The output stage incorporates a low voltage lock-out circuit that puts the outputs into a three-state mode when the supply voltage drops below 10V for the HS-4424RH and 7.5V for the HS-4424BRH.

Constructed with the Intersil dielectrically isolated Rad Hard Silicon Gate (RSG) BiCMOS process, these devices are immune to Single Event Latch-up and have been specifically designed to provide highly reliable performance in harsh radiation environments.

Specifications for Rad Hard QML devices are controlled by the Defense Supply Center in Columbus (DSCC). The SMD numbers listed here must be used when ordering.

Detailed Electrical Specifications for these devices are contained in SMD 5962-99560. A "hot-link" is provided on our homepage for downloading.
www.intersil.com/spacedefense/space.asp

 
  Key Features
 
  • Electrically Screened to DESC SMD # 5962-99560
  • QML Qualified per MIL-PRF-38535 Requirements
  • Radiation Environment
    • Total Dose (Max) 3 x 105 RAD(SI)
    • Latch-Up Immune
    • Low Dose Rate Immune
  • IPEAK >2A (Min)
  • Matched Rise and Fall Times (CL = 4300pF). . . 75ns (Max)
  • Low Voltage Lock-Out Feature
    • HS-4424RH < 10.0V
    • HS-4424BRH < 7.5V
  • Wide Supply Voltage Range 12V to 18V
  • Prop Delay 250ns (Max)
  • Consistent Delay Times with VCC Changes
  • Low Power Consumption
    • 40mW with Inputs High
    • 20mW with Inputs Low
  • Low Equivalent Input Capacitance 3.2pF (Typ)
  • ESD Protected >4000V
Related Documentation
 
Datasheet(s)   Datasheet(s):
 
SMD Datasheet(s)   SMD Datasheet(s):
 
Technical Homepage   Technical Homepage:
 
 
  Parametric Data
DSCC SMD5962-99560
ClassV, Q, /PROTO
High Dose Rate (HDR) rad(Si)300
SEL MeV/mg/cm2SEL free
 
  Application Block Diagrams
 
 
 
Applications
 
  • Switching Power Supplies
  • DC/DC Converters
  • Motor Controllers
 
  Related DevicesParametric Table   Parametric Table
 
 HS-4423RH Dual, Inverting Power MOSFET Driver 
 HS-4424RH Dual, Non-Inverting Power MOSFET Driver 
 IS-1715ARH Complementary Switch MOSFET Driver 

 

About Us | Careers | Contact Us | Investors | Legal | Privacy | Site Map | Subscribe | Intranet

©2003-2009. Intersil Americas Inc. All rights reserved.