Device Information
 
 
HS-3530ARH Printer Friendly Version
 
Programmable Low Power Op-Amp
 
Datasheets,
Related Docs
& Simulations
DescriptionKey
Features
Parametric
Data
Application
Diagrams
Related
Devices
 
 
Ordering Information
 iBuy direct from Intersil  iBuy direct - out of stock  Request samples
 Check distributor inventory Green/Pb(Lead free) Device  Available in RoHS/Pb-Free  
Part No. Design-In
Status
Temp. Package MSL SMD/VID Price
US $
PB Free
HS2-3530ARH-8 Active Mil 8 Ld Can N/A 5962F9568701QGA Contact Us   Disti-Buy  
HS2-3530ARH-Q Active Mil 8 Ld Can N/A 5962F9568701VGA Contact Us   Disti-Buy  
HS9-3530ARH-Q Active Mil 10 Ld FlatPack N/A 5962F9568701VXC Contact Us PB Free Disti-Buy  
The price listed is the manufacturer's suggested retail price for quantities of 1K units. However, prices in today's market are fluid and may change without notice.
MSL = Moisture Sensitivity Level - per IPC/JEDEC J-STD-020
SMD/VID = Standard Microcircuit Drawing/Vendor Item Drawing
 
  Description

The HS-3530ARH is a Low Power Operational Amplifier which is an internally compensated monolithic device offering a wide range of performance specifications. Parameters such as power dissipation, slew rate, bandwidth, noise and input DC parameters are programmed by selecting an external resistor or current source. Supply voltages as low as ±3V may be used with little degradation of AC performance. The HS-3530ARH has been specifically designed to meet exposure to space radiation environments. Operation from -55oC to 125oC is guaranteed.

A major advantage of the HS-3530ARH is that operating characteristics remain virtually constant over a wide supply range (±3V to ±15V), allowing the amplifier to offer maximum performance in almost any system, including battery operated equipment. A primary application for this device is in active filtering and conditioning for a wide variety of signals that differ in frequency and amplitude. Also, by modulating the set current, it can be used for designs such as current controlled oscillators/modulators, sample and hold circuits and variable active filters.

 
  Key Features
 
  • Radiation Performance
    • Gamma Dose 3 x 105 RAD(Si)
    • SEL Immune (RSG DI Process)
  • Wide Range AC Programming
    • Slew Rate 0.025 to 0.1V/µs
    • Gain X Bandwidth 30kHz to 750kHz
  • Wide Range DC Programming
    • Power Supply Range ±3.0V to ±15V
  • Supply Current 15µA to 150µA
  • Output Current 0.25mA to 2.5mA
  • Quiescent Power 4.8mW (Max)
  • Dielectrically Isolated Device Islands
  • Short Circuit Protection
  • Full -55oC to 125oC Military Temperature Range
Related Documentation
 
Datasheet(s)   Datasheet(s):
 
SMD Datasheet(s)   SMD Datasheet(s):
 
Technical Homepage   Technical Homepage:
 
 
  Parametric Data
DSCC SMD5962-95687
ClassV, Q, /PROTO
High Dose Rate (HDR) rad(Si)300
Low Dose Rate (ELDRS)In Qualification
SEL MeV/mg/cm2SEL free
 
  Application Block Diagrams
 

 

About Us | Careers | Contact Us | Investors | Legal | Privacy | Site Map | Subscribe | Intranet

©2003-2009. Intersil Americas Inc. All rights reserved.