Device Information
 
 
HIP6311A Printer Friendly Version
 
Microprocessor CORE Voltage Regulator Multiphase Buck PWM Controller
 
Datasheets,
Related Docs
& Simulations
DescriptionKey
Features
Parametric
Data
Application
Diagrams
Related
Devices
 
 
Ordering Information
 iBuy direct from Intersil  iBuy direct - out of stock  Request samples
 Check distributor inventory Green/Pb(Lead free) Device  Available in RoHS/Pb-Free  
Part No. Design-In
Status
Temp. Package MSL Price
US $
PB Free
HIP6311ACBZ Active Comm 20 Ld SOIC 3 2.53 PB Free Disti-Buy  
HIP6311ACBZ-T Active Comm 20 Ld SOIC T+R 3 2.53 PB Free Disti-Buy  
HIP6311ACBZA Active Comm 20 Ld SOIC 3 2.53 PB Free Disti-Buy  
HIP6311ACBZA-T Active Comm 20 Ld SOIC T+R 3 2.53 PB Free Disti-Buy  
HIP6311ACB-T InActive Comm 20 Ld SOIC T+R 1 N/A      
HIP6311ACB To Be
Discontinued
Comm 20 Ld SOIC 1 3.03      
The price listed is the manufacturer's suggested retail price for quantities of 1K units. However, prices in today's market are fluid and may change without notice.
MSL = Moisture Sensitivity Level - per IPC/JEDEC J-STD-020
SMD = Standard Microcircuit Drawing
 
  Description

The HIP6311A Multiphase Buck PWM control IC together with HIP6601A, HIP6602A or HIP6603A companion gate drivers form a precision voltage regulation system for advanced microprocessors. The HIP6311A controls microprocessor core voltage regulation by driving 2 to 4 synchronous-rectified buck channels in parallel. The multiphase buck topology takes advantage of interleaving phases to increase ripple frequency and reduce input and output ripple currents. Resulting in fewer components, reduced component ratings, lower power dissipation, and smaller implementation area.

The HIP6311A control IC features a 5 bit digital-to-analog converter (DAC) that adjusts the core output voltage from 1.100V to 1.850V with an unsurpassed system accuracy of ±0.5% over temperature. The HIP6311A uses a lossless current sensing approach in which the voltage developed across the on-resistance of the lower MOSFETs during conduction is sampled. Current sensing provides the required signals for precision droop, channel-current balancing, load sharing, and over-current protection.

Another feature of this control IC is the PGOOD monitor which is held low until the core voltage increases to within 8% of the programmed voltage. An over-voltage condition is detected when the output voltage exceeds 115% of the programmed VID. This results in the converter shutting down and PGOOD being pulled low. During an under-voltage condition (output voltage 10% below the programmed VID), PGOOD transitions low, but the converter continues to operate.

 
  Key Features
 
  • Precision CORE Voltage Regulation
    • ±0.5% System Accuracy Over Temperature
  • Microprocessor Voltage Identification Input
    • 5-Bit VID Input
    • 1.100V to 1.850V in 25mV Steps
    • Programmable Droop Voltage
  • RDS(on) Current Sensing
    • Accurate Channel Current Balancing
    • Loss less Current Sampling
    • Low-Cost Implementation
  • Fast Transient Response
  • Digital Soft Start
  • Over Current Protection
  • Selection of 2, 3, or 4 Phase Operation
  • 50kHz to 1.5MHz Switching Frequency
  • Pb-free available
Related Documentation
 
Datasheet(s)   Datasheet(s):
 
  Parametric Data
VIN (min) (V)3
VIN (max) (V)12
VOUT (min) (V)1.1
VOUT (max) (V)1.85
IOUT (max) (A)≥120
VBIAS (V)5
ApplicationsVR9
 
  Application Block Diagrams
 
 
 
Applications
 
  • Desktop Motherboards
  • Voltage Regulator Modules
  • Servers and Workstations
 
  Related DevicesParametric Table   Parametric Table
 
 HIP6301 Microprocessor CORE Voltage Regulator Multiphase Buck PWM Controller 
 HIP6301V Microprocessor CORE Voltage Regulator Multiphase Buck PWM Controller 
 HIP6302 Microprocessor CORE Voltage Regulator Multiphase Buck PWM Controller 
 HIP6311 Microprocessor CORE Voltage Regulator Multiphase Buck PWM Controller 
 ISL6560 Microprocessor Core Voltage Regulator Two Phase Buck PWM Controller 
 ISL6563 Two-Phase Multiphase Buck PWM Controller with Integrated MOSFET Drivers 
 ISL6566 Three-Phase Buck PWM Controller with Integrated MOSFET Drivers for VRM9, VRM10, and AMD Hammer Applications 
 ISL6566A Three-Phase Buck PWM Controller with Two Integrated MOSFET Drivers and One External Driver Signal 
 ISL6568 Two-Phase Buck PWM Controller with Integrated MOSFET Drivers for VRM9, VRM10, and AMD Hammer Applications 

 

About Us | Careers | Contact Us | Investors | Legal | Privacy | Site Map | Subscribe | Intranet

©2003-2009. Intersil Americas Inc. All rights reserved.