| |
|
|
| 80V/0.5A Peak Three Phase Driver |
| |
| |
|
|
|
|
| Buy Direct from Intersil |
 |
| | | | HIP4086AB |  | | | HIP4086ABZ | | | | HIP4086APZ | | | more |
|
|
| | | | HIP4086AB | | | | HIP4086ABZ | | | | HIP4086APZ | | | more |
|
|
|
|
|
|
|
|
|
|
 | HIP4086 | | 80V, 0.5A Three Phase Driver |
| | | Max Bootstrap Supply Voltage (V) |  | 95 | | | Max Bias Voltage (V) | | 15 | | | Peak Pull-up Current (A) | | .5 | | | Peak Pull-down Current (A) | | 1.1 | | | Turn-On Prop Delay (ns) | | 65 | | | Turn-Off Prop Delay (ns) | | 75 | | | Rise Time (ns) | | 20 | | | Fall Time (ns) | | 10 | |
| |
| Key Features |
-
Independently Drives 6 N-Channel MOSFETs in Three Phase Bridge Configuration
-
Bootstrap Supply Max Voltage to 95VDC
-
Bias Supply Operation from 7V to 15V
-
1.25A Peak Turn-Off Current
-
User-Programmable Dead Time (0.25µs to 4.5µs)
-
Charge-Pump and Bootstrap Maintain Upper Bias Supplies
-
Programmable Bootstrap Refresh Time
-
Drives 1000pF Load with Typical Rise Time of 20ns and Fall Time of 10ns
-
DIS (Disable) Overrides Input Control
-
Input Logic Thresholds Compatible with 5V to 15V Logic Levels
-
Dead Time Disable Capability
-
Programmable Undervoltage Set Point
-
Pb-free available
|
|
| Description |
The HIP4086 is a Three Phase Bridge N-Channel MOSFET driver IC. The HIP4086 is specifically targeted for PWM motor control. It makes bridge based designs simple and flexible. Like the HIP4081, the HIP4086 has a flexible input protocol for driving every possible switch combination. Unlike the HIP4081, the user can override the shoot-through protection for switched reluctance applications. The HIP4086 has reduced drive current compared to the HIP4081 (0.5A vs 2.5A) and a much wider range of programmable dead times (0.25µs to 4.5µs) - like the HIP4082. The HIP4086 is suitable for applications requiring DC to 100kHz. Unlike the previous family members, the HIP4086 has a programmable undervoltage set point.
Also refer to the HIP4083, three phase upper only MOSFET driver, for a lower current solution optimized for smaller motors. |
|
 iBuy direct from Intersil |  iBuy direct - out of stock |  Request samples |  Check distributor inventory |  Available in RoHS/Pb-Free | | | |
| Part No. | Design-In
Status | Temp. | Package | MSL | Price
US $ | | | | | |
|
| HIP4086AB |
Active |
Automotive |
24 Ld SOIC |
1 |
4.80 |
|  |
 |
 |
|
|
| HIP4086ABT |
Active |
Automotive |
24 Ld SOIC T+R |
1 |
4.88 |
| |
|
|
|
|
| HIP4086ABZ |
Active |
Automotive |
24 Ld SOIC |
3 |
4.00 |
 |
 |
|
|
|
|
| HIP4086ABZT |
Active |
Automotive |
24 Ld SOIC T+R |
3 |
4.07 |
|
|
|
|
|
|
| HIP4086APZ |
Active |
Automotive |
24 Ld PDIP |
N/A |
4.27 |
|
|
|
|
|
|
| HIP4086EVAL |
Active |
|
Eval Board |
N/A |
Contact Us |
| |
|
|
|
|
| HIP4086AP |
InActive |
Automotive |
24 Ld PDIP |
N/A |
N/A |
| |
|
|
|
|
| The price listed is the manufacturer's suggested retail price for quantities of 1K units. However, prices in today's market are fluid and may change without notice. |
| MSL = Moisture Sensitivity Level - per IPC/JEDEC J-STD-020 |
| SMD = Standard Microcircuit Drawing |
|
| Application Note(s): |
| | Datasheet(s): | | | Technical Brief(s): | | | |
|
|
| Applications | - Brushless Motors
- AC Motor Drives
- Switched Reluctance Motor Drives
- Battery Powered Vehicles
|
|
| | HIP4080A | | 80V/2.5A Peak, High Frequency Full Bridge FET Driver with Charge Pump and Input Comparators | | | HIP4081A | | 80V/2.5A Peak, High Frequency Full Bridge FET Driver with Charge Pump and Independent Control Inputs | | | HIP4082 | | 80V/1.25A Peak Current Full Bridge FET Driver | | | HIP4083 | | 80V/0.3A Peak Three Phase High Side Driver | | | ISL83202 | | 55V, 1A Peak Current H-Bridge FET Driver | | | ISL83204A | | 60V/2.5A Peak, High Frequency Full Bridge FET Driver | |
|
|
Related Devices
