HCTS74MS CMOS Dual-D Flip-Flop with Set and Reset

HCTS74MS

CMOS Dual-D Flip-Flop with Set and Reset

	Features Description		iSim Design Simulation
	Technical Documentation		Tools And Support
	Pricing / Samples

Buy Direct from Intersil

	Order Samples
	Not Available

	Buy Parts
	Not Available

	Buy Eval Boards
	Not Available

	Distributor Inventory

Not Available

Datasheet
	HCTS74MS
	Radiation Hardened Dual-D Flip-Flop with Set and Reset

DSCC SMD

5962-95763

Class

High Dose Rate (HDR) krad(Si)

200

Low Dose Rate (ELDRS) krad(Si)

ELDRS free

SEL MeV/mg/cm²

SEL free

Product Information

Key Features

3 Micron Radiation Hardened SOS CMOS
Total Dose 200K RAD (Si)
SEP Effective LET No Upsets: >100 MEV-cm²/mg
Single Event Upset (SEU) Immunity < 2 x 10^-9 Errors/ Bit-Day (Typ)
Dose Rate Survivability: >1 x 10¹² RAD (Si)/s
Dose Rate Upset >10¹⁰ RAD (Si)/s 20ns Pulse
Latch-Up Free Under Any Conditions
Military Temperature Range: -55^oC to +125^oC
Significant Power Reduction Compared to LSTTL ICs
DC Operating Voltage Range: 4.5V to 5.5V
LSTTL Input Compatibility
- VIL = 0.8V Max
- VIH = VCC/2 Min
Input Current Levels Ii ≤ 5µA at VOL, VOH

Description

The Intersil HCTS74MS is a Radiation Hardened positive edge triggered flip-flop with set and reset.

The HCTS74MS utilizes advanced CMOS/SOS technology to achieve high-speed operation. This device is a member of radiation hardened, high-speed, CMOS/SOS Logic Family.

The HCTS74MS is supplied in a 14 lead Ceramic flatpack (K suffix) or a SBDIP Package (D suffix).

Pricing / Packaging / Samples / Ordering

iBuy direct from Intersil	iBuy direct - out of stock	Request samples
Check distributor inventory	Available in RoHS/Pb-Free

	Part No.	Design-In Status	Temp.	Package	MSL	SMD/VID	Price US $

	HCTS74DMSR	InActive	-	14 Ld SBDIP	N/A	5962R9576301VCC	Contact Us

	HCTS74KMSR	InActive	-	14 Ld FlatPack	N/A	5962R9576301VXC	Contact Us

The price listed is the manufacturer's suggested retail price for quantities of 1K units. However, prices in today's market are fluid and may change without notice.
MSL = Moisture Sensitivity Level - per IPC/JEDEC J-STD-020
SMD/VID = Standard Microcircuit Drawing/Vendor Item Drawing

Technical Documentation

Application Note(s):
Use of Life Tested Parts
Datasheet(s):
Radiation Hardened Dual-D Flip-Flop with Set and Reset
SMD Datasheet(s):
Radiation Hardened Dual-D Flip-Flop with Set and Reset

Tools And Support
iSim Design Simulation
No Models Available