| |
|
|
| CMOS Inverting Octal Buffer/Line Driver, Three-State |
| |
| |
|
|
 | HCTS540MS | | Radiation Hardened Inverting Octal Buffer/Line Driver, Three-State |
|  | | DSCC SMD |  | 5962-95776 | | | Class | | V | | | High Dose Rate (HDR) rad(Si) | | 200 | | | Low Dose Rate (ELDRS) | | ELDRS free | | | SEL MeV/mg/cm2 | | SEL free | |
| |
| Key Features |
-
3 Micron Radiation Hardened CMOS SOS
-
Total Dose 200K RAD (Si)
-
SEP Effective LET No Upsets: >100 MEV-cm2/mg
-
Single Event Upset (SEU) Immunity < 2 x 10-9 Errors/ Bit-Day (Typ)
-
Dose Rate Survivability: >1 x 1012 RAD (Si)/s
-
Dose Rate Upset >1010 RAD (Si)/s 20ns Pulse
-
Latch-Up Free Under Any Conditions
-
Fanout (Over Temperature Range)
-
Bus Driver Outputs 15 LSTTL Loads
-
Military Temperature Range: -55oC to +125oC
-
Significant Power Reduction Compared to LSTTL ICs
-
DC Operating Voltage Range: 4.5V to 5.5V
-
LSTTL Input Compatibility
-
VIL = 0.8V Max
-
VIH = VCC/2 Min
-
Input Current Levels Ii ≤ 5ľA at VOL, VOH
|
|
| Description |
The Intersil HCTS540MS is a Radiation Hardened inverting Octal Buffer/Line Driver, with two active-low output enables. The output enable pins (OE1 and OE2) control the threestate outputs. If either enable is high the outputs will be the high impedance state. For data output both enables (OE1 and OE2) must be low.
The HCTS540MS utilizes advanced CMOS/SOS technology to achieve high-speed operation. This device is a member radiation hardened, high-speed, CMOS/SOS Logic Family.
The HCTS540MS is supplied in a 20 lead Ceramic flatpack (K suffix) or a SBDIP Package (D suffix). |
|
 iBuy direct from Intersil |  iBuy direct - out of stock |  Request samples |  Check distributor inventory |  Available in RoHS/Pb-Free | | | |
| Part No. | Design-In
Status | Temp. | Package | MSL | SMD/VID |
Price
US $ | | | | | |
|
| HCTS540KMSR |
Active |
- |
20 Ld FlatPack |
N/A |
5962R9577601VXC |
Contact Us |
 |
|
 |
|
|
|
| The price listed is the manufacturer's suggested retail price for quantities of 1K units. However, prices in today's market are fluid and may change without notice. |
| MSL = Moisture Sensitivity Level - per IPC/JEDEC J-STD-020 |
| SMD/VID = Standard Microcircuit Drawing/Vendor Item Drawing |
|
| Application Note(s): |
| | Datasheet(s): | | | SMD Datasheet(s): | | | Technical Homepage: | | | |
|
|
|
| | ACS541MS | | CMOS Non-Inverting Octal Buffer/Line Driver, Three-State | | | ACTS240MS | | CMOS Octal Buffer/Line Driver, Three-State, Inverting | | | HCS240MS | | CMOS Octal Buffer/Line Driver, Three-State, Inverting | | | HCS244MS | | CMOS Non-Inverting Octal Buffer/Line Driver, Three-State | | | HCTS541MS | | CMOS Non-Inverting Octal Buffer/Line Driver, Three-State | |
|
|
Related Devices
