Device Information
 
 
EL7585 Printer Friendly Version
 
TFT-LCD Power Supply
 
Datasheets,
Related Docs
& Simulations
DescriptionKey
Features
Parametric
Data
Application
Diagrams
 
 
Ordering Information
 iBuy direct from Intersil  iBuy direct - out of stock  Request samples
 Check distributor inventory Green/Pb(Lead free) Device  Available in RoHS/Pb-Free  
Part No. Design-In
Status
Temp. Package MSL Price
US $
PB Free
EL7585IL InActive Ind 20 Ld QFN   N/A      
EL7585IL-T13 InActive Ind 20 Ld QFN T+R   N/A      
EL7585IL-T7 InActive Ind 20 Ld QFN T+R   N/A      
EL7585ILZ InActive Ind 20 Ld QFN 3 N/A PB Free    
EL7585ILZ-T13 InActive Ind 20 Ld QFN T+R 3 N/A PB Free    
EL7585ILZ-T7 InActive Ind 20 Ld QFN T+R 3 N/A PB Free    
The price listed is the manufacturer's suggested retail price for quantities of 1K units. However, prices in today's market are fluid and may change without notice.
MSL = Moisture Sensitivity Level - per IPC/JEDEC J-STD-020
SMD = Standard Microcircuit Drawing
 
  Description

The EL7585 represents a multiple output regulators for use in all large panel, TFT-LCD applications. It features a single boost converter with integrated 3.5A FET, two positive LDOs for VON and VLOGIC generation, and a single negative LDO for VOFF generation. The boost converter can be programmed to operate in either P-mode or PI-mode for improved load regulation.

The EL7585 also integrates fault protection for all four channels. Once a fault is detected, the device is latched off until the input supply or EN is cycled. This device also features an integrated start-up sequence for VBOOST, VOFF, then VON or for VOFF, VBOOST, and VON sequencing. The latter requires a single external transistor. The timing of the start-up sequence is set using an external capacitor.

The EL7585 is specified for operation over the -40°C to +85°C temperature range.

 
  Key Features
 
  • 3.5A current limit FET options
  • 3V to 5V input
  • Up to 20V boost out
  • 1% regulation on all outputs
  • VBOOST/VLOGIC-VOFF-VON or VLOGIC-VOFF-VBOOSTVON sequence control
  • Programmable sequence delay
  • Fully fault protected
  • Thermal shutdown
  • Internal soft-start
  • 20 Ld QFN packages
  • Pb-Free plus anneal available (RoHS Compliant)
Related Documentation
 
Datasheet(s)   Datasheet(s):
 
  Parametric Data
Input Voltage (V)3 to 5.5
VBOOST (V)5.5 to 20
FET Size (A)3.5
VON (V)5 to 32
VOFF (V)-15 to 0
VLOGIC (V)1.2 to 3.3
# of VCOMN/A
# of GammaN/A
FeaturesStart-up sequencing (inc. VLOGIC), fault protection
 
  Application Block Diagrams
 
 
 
Applications
 
  • LCD monitors (15"+)
  • LCD-TV (up to 40"+)
  • Notebook displays (up to 16")
  • Industrial/medical LCD displays

 

About Us | Careers | Contact Us | Investors | Legal | Privacy | Site Map | Subscribe | Intranet

©2003-2009. Intersil Americas Inc. All rights reserved.