| |
|
|
| Ultra-High Current Pin Driver |
| |
| |
|
|
|
|
| Buy Direct from Intersil |
 |
| | | | EL7158CS-EVAL |  | | | EL7158IS | | | | EL7158ISZ | | | more |
|
|
| | | | EL7158ISZ | |
|
|
|
|
|
|
|
|
|
|
 | EL7158 | | Ultra-High Current Pin Driver |
| | | # of Drivers |  | 1 | | | Max Operating Frequency (MHz) | | 40 | | | Peak Output IPK (A) | | 12 | | | Rise Time (ns) | | 12 | | | Fall Time (ns) | | 12 | | | Turn On Delay (ns) | | 22 | | | Turn Off Delay (ns) | | 22.5 | | | IS (mA) | | 2.5 | | | RON (Ω) | | .5 | | | Input Signal Range (V) | | 0 to VP | | | Input Supply Range (VP) | | +4.5 to +18 | | | Max Input Signal (V) | | 18 | | | Output Signal Range (V) | | -5 to +12 | | | Max Output Signal Range (V) | | 12 | |
| |
| Key Features |
-
Clocking speeds up to 40MHz
-
12ns tR/tF at 2000pF CLOAD
-
0.2ns rise and fall times mismatch
-
0.5ns tON-tOFF prop delay mismatch
-
3.5pF typical input capacitance
-
12A peak drive
-
Low ON-resistance of 0.5Ω
-
High capacitive drive capability
-
Operates from 4.5V to 12V
-
Pb-free plus anneal available (RoHS compliant)
|
|
| Description |
The EL7158 high performance pin driver with three-state is suited to many ATE and level-shifting applications. The 12A peak drive capability makes this part an excellent choice when driving high capacitance loads.
The output pin OUT is connected to input pins VH or VL respectively, depending on the status of the IN pin. When the OE pin is active low, the output is placed in the three-state mode. The isolation of the output FETs from the power supplies enables VH and VL to be set independently, enabling level-shifting to be implemented. Related to the EL7155, the EL7158 adds a lower supply pin VS- and makes VL an isolated and independent input. This feature adds applications flexibility and improves switching response due to the increased enhancement of the output FETs.
This pin driver has improved performance over existing pin drivers. It is specifically designed to operate at voltages down to 0V across the switch elements while maintaining good speed and ON-resistance characteristics.
Available in the 8 Ld SOIC package, the EL7158 is specified for operation over the full -40°C to +85°C temperature range. |
|
 iBuy direct from Intersil |  iBuy direct - out of stock |  Request samples |  Check distributor inventory |  Available in RoHS/Pb-Free | | | |
| Part No. | Design-In
Status | Temp. | Package | MSL | Price
US $ | | | | | |
|
| EL7158CS-EVAL |
Active |
|
Eval Board |
N/A |
Contact Us |
| |
 |
 |
|
|
| EL7158IS |
Active |
Ind |
8 Ld SOIC |
1 |
4.24 |
| |
|
|
|
|
| EL7158ISZ |
Active |
Ind |
8 Ld SOIC |
3 |
3.53 |
 |
 |
|
|
|
|
| EL7158ISZ-T13 |
Active |
Ind |
8 Ld SOIC T+R |
3 |
3.66 |
|
|
|
|
|
|
| EL7158ISZ-T7 |
Active |
Ind |
8 Ld SOIC T+R |
3 |
3.66 |
|
|
|
|
|
|
| EL7158IS-T13 |
To Be
Discontinued |
Ind |
8 Ld SOIC T+R |
1 |
3.66 |
| |
|
|
|
|
| EL7158IS-T7 |
To Be
Discontinued |
Ind |
8 Ld SOIC T+R |
1 |
3.66 |
| |
|
|
|
|
| The price listed is the manufacturer's suggested retail price for quantities of 1K units. However, prices in today's market are fluid and may change without notice. |
| MSL = Moisture Sensitivity Level - per IPC/JEDEC J-STD-020 |
| SMD = Standard Microcircuit Drawing |
|
| Application Note(s): |
| | Datasheet(s): | | | Technical Brief(s): | | | Technical Homepage: | | | |
|
|
| No Models Available | | Design Model(s): | |
|
|
| Applications | - ATE/burn-in testers
- Level shifting
- IGBT drivers
- CCD drivers
|
|
| | EL7104 | | High Speed, Single Channel, Power MOSFET Driver | | | EL7154 | | High Speed, Monolithic Pin Driver | | | EL7155 | | High Performance Pin Driver | | | EL7156 | | High Performance Pin Driver | | | EL7182 | | 2-Phase, High Speed CCD Driver | | | ISL55100A | | Quad 18V Pin Electronics Driver/Window Comparator | | | ISL55100B | | Quad 18V Pin Electronics Driver/Window Comparator | | | ISL55110 | | Dual, High Speed MOSFET Driver | | | ISL55111 | | Dual, High Speed MOSFET Driver | |
|
|
Related Devices
