The price listed is the manufacturer's suggested retail price for quantities of 1K units. However, prices in today's market are fluid and may change without notice.
MSL = Moisture Sensitivity Level - per IPC/JEDEC J-STD-020
SMD = Standard Microcircuit Drawing
Description
The EL6201 is a solid state high performance laser modulation oscillator with external resistor adjustable frequency and amplitude. The EL6201 is available in both the 8 Ld MSOP and the 5 Ld SOT-23, to enable device placement close to the laser for reduced EMI.
The oscillator frequency is set by connecting a single external resistor from the RFREQ pin to ground. The oscillator current output amplitude is set by connecting a single external resistor from the RAMP pin to ground. The oscillator in the MSOP package also contains a high speed output disable function using the OE pin. The OE pin can be driven by a high speed timing signal to control precise laser modulation during read/write operations. The output current is disabled when a logical zero 'L' is driven to the CE pin. Supply current is reduced to microamps when CE = LOW.
The EL6201 has internal supply bypass capacitors to reduce oscillation noise spread through supply connections.
Key Features
Small SOT-23 and MSOP8 packages
Frequency to 430MHz min
Amplitude to 25mAP-P min
Output tristate function (MSOP8)
Power-down function (MSOP8)
Single +3.5V to +5.0V supply
Simple to use - only two external resistors required
Independent resistor setting for frequency and amplitude
Technical Homepage: