| |
|
| |
| Sync Separator with Horizontal Output |
| |
|
| |
| |
| Ordering Information |
|
 |
 |
|
 iBuy direct from Intersil
|
 iBuy direct - out of stock
|
 Request samples
|
 Check distributor inventory
|
Available in RoHS/Pb-Free
|
|
|
|
|
|
|
Part No. |
Design-In
Status |
Temp. |
Package |
MSL |
Price
US $ |
|
|
|
|
|
|
| EL1883IS |
Active |
Ind |
8 Ld SOIC |
1 |
1.55 |
|  |
 |
|
|
|
| EL1883IS-T7 |
Active |
Ind |
8 Ld SOIC T+R |
1 |
1.68 |
| |
|
|
|
|
| EL1883ISZ |
Active |
Ind |
8 Ld SOIC |
3 |
1.29 |
 |
 |
|
 |
|
|
| EL1883ISZ-T13 |
Active |
Ind |
8 Ld SOIC T+R |
3 |
1.40 |
|
|
|
|
|
|
| EL1883ISZ-T7 |
Active |
Ind |
8 Ld SOIC T+R |
3 |
1.40 |
|
|
|
|
|
|
| EL1883IS-EVAL |
InActive |
|
Eval Board |
N/A |
N/A |
| |
|
|
|
|
| EL1883IS-T13 |
InActive |
Ind |
8 Ld SOIC T+R |
1 |
N/A |
| |
|
|
|
|
| The price listed is the manufacturer's suggested retail price for quantities of 1K units. However, prices in today's market are fluid and may change without notice. |
| MSL = Moisture Sensitivity Level - per IPC/JEDEC J-STD-020 |
| SMD = Standard Microcircuit Drawing |
|
| |
 Description |
|
|
The EL1883 video sync separator is manufactured using Elantec's high performance analog CMOS process. This device extracts sync timing information from both standard and non-standard video input and also in the presence of Macrovision pulses. It provides composite sync, vertical sync, burst/back porch timing, and horizontal outputs. Fixed 70mV sync tip slicing provides sync edge detection when the video input level is between 0.5VP-P and 2VP-P (sync tip amplitude 143mV to 572mV). A single external resistor sets all internal timing to adjust for various video standards. The composite sync output follows video in sync pulses and a vertical sync pulse is output on the rising edge of the first vertical serration following the vertical pre-equalizing string. For non-standard vertical inputs, a default vertical pulse is output when the vertical signal stays low for longer than the vertical sync default delay time. The horizontal output gives horizontal timing with pre/post equalizing pulses.
The EL1883 is available in an 8-pin SO package and is specified for operation over the full -40°C to +85°C temperature range. |
| |
 Key Features |
|
|
| |
-
NTSC, PAL, SECAM, non-standard video sync separation
-
Fixed 70mV slicing of video input levels from 0.5VP-P to 2VP-P
-
Low supply current - 1.5mA typ.
-
Single 3V to 5V supply
-
Composite sync output
-
Vertical output
-
Horizontal output
-
Burst/back porch output
-
Macrovision compatible
-
Available in 8-pin SO package
-
Pb-Free plus anneal available (RoHS compliant)
|
| Related Documentation |
|
|
| |
 Application Note(s): |
|
| |
 Datasheet(s): |
| | |
 Evaluation Board(s): |
| | |
 Technical Homepage: |
| | | |
| |
 Parametric Data |
| | Slicing Fixed (70mV) | | X | | | Color Burst Filter - External | | X | | | Outputs Composite | | X | | | Outputs Horizontal | | X | | | Outputs Vertical | | X | | | Outputs Burst | | X | | | Composite Prop Delay (ns) | | 30 | | | Supply Current (mA) | | 1.2 | |
|
| |
 Application Block Diagrams |
|
| |
|
| |
| |
| Applications |
|
| |
- Video amplifiers
- PCMCIA applications
- A/D drivers
- Line drivers
- Portable computers
|
| |
|
|
| |
| | EL1881 | | Sync Separator, Low Power | | | EL4501 | | Video Front End | | | EL4511 | | Super Sync Separator | | | EL4581 | | Sync Separator, 50% Slice, S-H, Filter | | | EL4583 | | Sync Separator, 50% Slice, S-H, Filter, HOUT | | | EL4583A | | Sync Separator, 50% Slice, S-H, Filter, HOUT | | | ISL59885 | | Auto-Adjusting Sync Separator for HD and SD Video | |
|
