Device Information
 
 
EL1881 Printer Friendly Version
 
Sync Separator, Low Power
 
Datasheets,
Related Docs
& Simulations
DescriptionKey
Features
Parametric
Data
Application
Diagrams
Related
Devices
 
 
Ordering Information
 iBuy direct from Intersil  iBuy direct - out of stock  Request samples
 Check distributor inventory Green/Pb(Lead free) Device  Available in RoHS/Pb-Free  
Part No. Design-In
Status
Temp. Package MSL Price
US $
PB Free
EL1881CN Active Ind 8 Ld PDIP N/A 1.36  Buy Direct Disti-Buy  
EL1881CN-EVAL Active   Eval Board N/A Contact Us   Disti-Buy Sample
EL1881CS Active Ind 8 Ld SOIC 1 1.36  Buy Direct Disti-Buy  
EL1881CS-T7 Active Ind 8 Ld SOIC T+R 1 1.43   Disti-Buy  
EL1881CSZ Active Ind 8 Ld SOIC 3 1.13 PB Free Out of stock Disti-Buy Sample
EL1881CSZ-T13 Active Ind 8 Ld SOIC T+R 3 1.19 PB Free Disti-Buy  
EL1881CSZ-T7 Active Ind 8 Ld SOIC T+R 3 1.19 PB Free Buy Direct Disti-Buy  
EL1881CS-EVAL InActive   Eval Board N/A N/A      
EL1881CS-T13 InActive Ind 8 Ld SOIC T+R 1 N/A      
The price listed is the manufacturer's suggested retail price for quantities of 1K units. However, prices in today's market are fluid and may change without notice.
MSL = Moisture Sensitivity Level - per IPC/JEDEC J-STD-020
SMD = Standard Microcircuit Drawing
 
  Description

The EL1881 video sync separator is manufactured using Elantec's high performance analog CMOS process. This device extracts sync timing information from both standard and non-standard video input. It provides composite sync, vertical sync, burst/back porch timing, and odd/even field detection. Fixed 70mV sync tip slicing provides sync edge detection when the video input level is between 0.5VP-P and -2VP-P (sync tip amplitude 143mV to 572mV). A single external resistor sets all internal timing to adjust for various video standards. The composite sync output follows video in sync pulses and a vertical sync pulse is output on the rising edge of the first vertical serration following the vertical preequalizing string. For non-standard vertical inputs, a default vertical pulse is output when the vertical signal stays low for longer than the vertical sync default delay time. The odd/even output indicates field polarity detected during the vertical blanking interval. The EL1881 is plug-in compatible with the industry-standard LM1881 and can be substituted for that part in 5V applications with lower required supply current.

The EL1881 is available in the 8-pin PDIP and SO packages and is specified for operation over the full -40°C to +85°C temperature range.

 
  Key Features
 
  • NTSC, PAL, SECAM, non-standard video sync separation
  • Fixed 70mV slicing of video input levels from 0.5VP-P to 2VP-P
  • Low supply current - 1.5mA typ.
  • Single +5V supply
  • Composite, vertical sync output
  • Odd/even field output
  • Burst/back porch output
  • Available in 8-pin PDIP and SO packages
  • Pb-free available
Related Documentation
 
Datasheet(s)   Datasheet(s):
 
Evaluation Board(s)   Evaluation Board(s):
 
Technical Homepage   Technical Homepage:
 
 
  Parametric Data
Slicing Fixed (70mV)X
Color Burst Filter - ExternalX
Outputs CompositeX
Outputs VerticalX
Outputs BurstX
Outputs Odd/EvenX
Composite Prop Delay (ns)30
Supply Current (mA)1.2
 
  Application Block Diagrams
 
 
 
Applications
 
  • Video amplifiers
  • PCMCIA applications
  • A/D drivers
  • Line drivers
  • Portable computers
  • High-speed communications
  • RGB applications
  • Broadcast equipment
  • Active filtering
 
  Related DevicesParametric Table   Parametric Table
 
 EL1883 Sync Separator with Horizontal Output 
 EL4501 Video Front End 
 EL4511 Super Sync Separator 
 EL4581 Sync Separator, 50% Slice, S-H, Filter 
 EL4583 Sync Separator, 50% Slice, S-H, Filter, HOUT 
 EL4583A Sync Separator, 50% Slice, S-H, Filter, HOUT 
 ISL59885 Auto-Adjusting Sync Separator for HD and SD Video 

 

About Us | Careers | Contact Us | Investors | Legal | Privacy | Site Map | Subscribe | Intranet

©2003-2009. Intersil Americas Inc. All rights reserved.