Device Information
 
 
CD4049UBMS Printer Friendly Version
 
CMOS Hex Buffer/Converter
 
Datasheets,
Related Docs
& Simulations
DescriptionKey
Features
Parametric
Data
Related
Devices
 
 
Ordering Information
 iBuy direct from Intersil  iBuy direct - out of stock  Request samples
 Check distributor inventory Green/Pb(Lead free) Device  Available in RoHS/Pb-Free  
Part No. Design-In
Status
Temp. Package MSL SMD/VID Price
US $
PB Free
CD4049UBDMSR Active Mil 16 Ld SBDIP N/A 5962R9663601VEC Contact Us PB Free Disti-Buy  
CD4049UBHSR Active Mil Die (Military Visual) N/A 5962R9663601V9A Contact Us PB Free Disti-Buy  
CD4049UBKMSR Active Mil 16 Ld FlatPack N/A 5962R9663601VXC Contact Us PB Free Disti-Buy  
CD4049UBKNSR Active Mil 16 Ld FlatPack N/A 5962R9663602VXC Contact Us PB Free Disti-Buy  
CD4049UBDNSR InActive Mil 16 Ld SBDIP N/A 5962R9663602VEC N/A      
The price listed is the manufacturer's suggested retail price for quantities of 1K units. However, prices in today's market are fluid and may change without notice.
MSL = Moisture Sensitivity Level - per IPC/JEDEC J-STD-020
SMD/VID = Standard Microcircuit Drawing/Vendor Item Drawing
 
  Description

The CD4049UBMS is an inverting hex buffer and features logic level conversion using only one supply (voltage (VCC). The input signal high level (VIH) can exceed the VCC supply voltage when this device is used for logic level conversions. This device is intended for use as CMOS to DTL/TTL converters and can drive directly two DTL/TTL loads. (VCC = 5V, VOL ¡Ü 0.4V, and IOL ¡Ý 3.3mA.

The CD4049UBMS is designated as replacement for CD4009UB. Because the CD4049UBMS requires only one power supply, it is preferred over the CD4009UB and CD4010B and should be used in place of the CD4009UB in all inverter, current driver, or logic level conversion applications. In these applications the CD4049UBMS is pin compatible with the CD4009UB, and can be substituted for this device in existing as well as in new designs. Terminal No. 16 is not connected internally on the CD4049UBMS, therefore, connection to this terminal is of no consequence to circuit operation. For applications not requiring high sink current or voltage conversion, the CD4069UB Hex Inverter is recommended.

The CD4049UBMS is supplied in these 16 lead outline packages:

Braze Seal DIP H4S
Frit Seal DIP H1E
Ceramic Flatpack H3X

 
  Key Features
 
  • High Voltage Type (20V Rating)
  • Inverting Type
  • High Sink Current for Driving 2 TTL Loads
  • High-to-Low Level Logic Conversion
  • 100% Tested for Quiescent Current at 20V
  • Maximum Input Current of 1µA at 18V Over Full Package Temperature Range; 100nA at 18V and +25oC
  • 5V, 10V and 15V Parametric Ratings
Related Documentation
 
Application Note(s)   Application Note(s):
 
Datasheet(s)   Datasheet(s):
 
SMD Datasheet(s)   SMD Datasheet(s):
 
Technical Homepage   Technical Homepage:
 
 
  Parametric Data
DSCC SMD5962-96636
ClassV
High Dose Rate (HDR) rad(Si)100
Low Dose Rate (ELDRS)ELDRS free
SEL MeV/mg/cm275
 
 
Applications
 
  • CMOS to DTL/TTL Hex Converter
  • CMOS Current "Sink" or "Source" Driver
  • CMOS High-to-Low Logic Level Converter
 
  Related DevicesParametric Table   Parametric Table
 
 ACTS04MS Hex Inverter 
 CD4069UBMS CMOS Hex Inverter 
 CD4503BMS CMOS Hex Buffer 
 HCS05MS CMOS Hex Inverter with Open Drain 

 

About Us | Careers | Contact Us | Investors | Legal | Privacy | Site Map | Subscribe | Intranet

©2003-2009. Intersil Americas Inc. All rights reserved.