| |
|
| |
| CMOS Non-Inverting Octal Buffer/Line Driver, Three-State |
| |
|
| |
| |
| Ordering Information |
|
 |
 |
|
 iBuy direct from Intersil
|
 iBuy direct - out of stock
|
 Request samples
|
 Check distributor inventory
|
Available in RoHS/Pb-Free
|
|
|
|
|
|
|
Part No. |
Design-In
Status |
Temp. |
Package |
MSL |
SMD/VID |
Price
US $ |
|
|
|
|
|
|
| ACS541HMSR-02 |
Active |
Mil |
Die (Military Visual) |
N/A |
5962F9671002V9A |
Contact Us |
 |
|
 |
|
|
|
| ACS541KMSR-02 |
Active |
Mil |
20 Ld FlatPack |
N/A |
5962F9671002VXC |
Contact Us |
|
|
|
|
|
|
| The price listed is the manufacturer's suggested retail price for quantities of 1K units. However, prices in today's market are fluid and may change without notice. |
| MSL = Moisture Sensitivity Level - per IPC/JEDEC J-STD-020 |
| SMD/VID = Standard Microcircuit Drawing/Vendor Item Drawing |
|
| |
 Description |
|
|
The Intersil ACS541MS is a Radiation Hardened Octal Buffer/Line Driver, with three-state outputs. The output enable pins OE1, OE2 control the Three-State outputs. If either enable is high the output will be in a high impedance state. For data output both enables must be low.
The ACS541MS utilizes advanced CMOS/SOS technology to achieve high-speed operation. This device is a member of a radiation hardened, high-speed, CMOS/SOS Logic family.
The ACS541MS is supplied in a 20 lead Ceramic Flatpack (K suffix) or a Ceramic Dual-In-Line package (D suffix). |
| |
 Key Features |
|
|
| |
-
Devices QML Qualified in Accordance with MIL-PRF-38535
-
Detailed Electrical and Screening Requirements are Contained in SMD# 5962-96710 and Intersil's QM Plan
-
1.25 Micron Radiation Hardened SOS CMOS
-
Total Dose >300K RAD (Si)
-
Single Event Upset (SEU) Immunity: <1 x 10-10 Errors/Bit/Day(Typ)
-
SEU LET Threshold >100 MEV-cm2/mg
-
Dose Rate Upset >1011 RAD (Si)/s, 20ns Pulse
-
Dose Rate Survivability >1012 RAD (Si)/s, 20ns Pulse
-
Latch-Up Free Under Any Conditions
-
Military Temperature Range -55oC to +125oC
-
Significant Power Reduction Compared to ALSTTL Logic
-
DC Operating Voltage Range 4.5V to 5.5V
-
Input Logic Levels
-
VIL = 30% of VCC Max
-
VIH = 70% of VCC Min
-
Input Current ≤ 1ľA at VOL, VOH
-
Fast Propagation Delay 17ns (Max), 12ns (Typ)
|
| Related Documentation |
|
|
| |
 Application Note(s): |
|
| |
 Datasheet(s): |
| | |
 Technical Homepage: |
| | | |
| |
 Parametric Data |
| | DSCC SMD | | 5962-96710 | | | Class | | V | | | High Dose Rate (HDR) rad(Si) | | 300 | | | Low Dose Rate (ELDRS) | | ELDRS free | | | SEL MeV/mg/cm2 | | SEL free | |
|
| |
|
|
| |
| | ACTS240MS | | CMOS Octal Buffer/Line Driver, Three-State, Inverting | | | HCS240MS | | CMOS Octal Buffer/Line Driver, Three-State, Inverting | | | HCS244MS | | CMOS Non-Inverting Octal Buffer/Line Driver, Three-State | | | HCTS540MS | | CMOS Inverting Octal Buffer/Line Driver, Three-State | | | HCTS541MS | | CMOS Non-Inverting Octal Buffer/Line Driver, Three-State | |
|
