| |
|
| |
|
|
| ±15kV ESD Protected, +5.0V, 1μA, 250kbps, RS-232 Transmitter/Receiver |
| |
| |
|
|
 | 5962-0620706Q3A | | ±15kV ESD Protected, +5.0V, 1μA, 250kbps, RS-232 Transmitters/Receivers |
|  | | # of Tx |  | 5 | | | # of Rx | | 3 | | | High ESD | | Yes | | | Manual Shutdown | | Yes | | | Auto Shutdown | | Enhanced | | | Rx Disable | | No | | | Data Rate (Mbps) | | .5 | | | Cap. Value (µF) | | .1 | | | IS Enabled (mA) | | .3 | | | IS Disabled (µA) | | .01 | | | VCC Range (V) | | 3 to 5.5 | | | VCC (min) (V) | | 3 | | | VCC (max) (V) | | 5.5 | |
| |
| Key Features |
-
Meets EIA/TIA-232 and V.28/V.24 Specifications at 5V
-
Electrically Screened to DSCC SMD#5962-06207
-
QML Qualified per MIL-PRF-38535 Requirements
-
SMD Compliance
-
Military Temperature Range
-
Latch-up Free
-
Hermetic Package
-
ESD Protection for RS-232 I/O Pins to ±15kV (IEC61000)
-
Guaranteed Mouse Driveability (ICL3243E)
-
Requires Single +5.0V ±10% Power Supply
-
Receiver Hysteresis for Improved Noise Immunity
-
Low Power Automatic Power-down Modes (Except for ICL3232E) = 1μA
-
Guaranteed Minimum 250kbps Data Rate
-
Manual and Automatic Power-down Features
-
Multiple Drivers/Receivers
-
On-Chip Voltage Converters Require Only Four External Capacitors
-
Regulated Dual Charge Pumps
|
|
| Description |
The Intersil 5962-062070xQxA devices are 5.0V powered RS-232 transmitters/receivers which meet ElA/TIA-232 and V.28/V.24 specifications. Additionally, they provide ±15kV ESD protection (IEC61000-4-2 Air Gap and MIL-STD 883 Human Body Model) on transmitter outputs and receiver inputs (RS-232 pins). Targeted applications include ruggedized portable products and remotely deployed devices exposed to extreme temperature and humidity where the low operational and even lower standby, power consumption is critical. Efficient on-chip charge pumps, coupled with manual and automatic power-down functions (except for the 5962-0620707Q2A), reduce the standby supply current to a 1μA trickle. Small footprint packaging and the use of small, low value capacitors ensure board space savings as well. Data rates greater than 250kbps are guaranteed at worst case load conditions. This family is fully compatible with 5.0V-only systems.
|
|
 iBuy direct from Intersil |  iBuy direct - out of stock |  Request samples |  Check distributor inventory | | | | |
| Part No. | Design-In
Status | Temp. | Package | MSL | SMD/VID |
Price
US $ |  | | | | |
|
| 5962-0620706Q3A |
Active |
Mil |
28 Ld CLCC |
N/A |
5962-0620706Q3A |
36.04 |
| |
 |
|
|
|
| The price listed is the manufacturer's suggested retail price for quantities of 1K units. However, prices in today's market are fluid and may change without notice. |
| MSL = Moisture Sensitivity Level - per IPC/JEDEC J-STD-020 |
| SMD/VID = Standard Microcircuit Drawing/Vendor Item Drawing |
|
| Application Note(s): |
| | Datasheet(s): | | | Technical Homepage: | | | |
|
|
| Applications | - Any Military or High-Rel System Requiring RS-232 Communication Ports
- Battery-Powered, Hand-Held, and Portable Equipment
- Ruggedized Handheld GPS, Laptop Computers, Notebooks, Palmtops
- Industrial Control/Shop Floor Communications
- Field Deployed Sensors/Devices Exposed to Extreme Temperature/Humidity
- Ruggedized Cellular/Mobile Phones
|
|
| | 5962-0620701Q3A | | ±15kV ESD Protected, +3.3V, 1μA, 250kbps, RS-232 Transmitter/Receiver | | | 5962-0620702Q3A | | ±15kV ESD Protected, +3.3V, 1μA, 250kbps, RS-232 Transmitter/Receiver | | | 5962-0620703Q2A | | ±15kV ESD Protected, +3.3V, 1μA, 250kbps, RS-232 Transmitter/Receiver | | | 5962-0620704Q2A | | ±15kV ESD Protected, +3.3V, 1μA, 250kbps, RS-232 Transmitter/Receiver | | | 5962-0620705Q3A | | ±15kV ESD Protected, +5.0V, 1μA, 250kbps, RS-232 Transmitter/Receiver | | | 5962-0620707Q2A | | ±15kV ESD Protected, +5.0V, 1μA, 250kbps, RS-232 Transmitter/Receiver | | | 5962-0620708Q2A | | ±15kV ESD Protected, +5.0V, 1μA, 250kbps, RS-232 Transmitter/Receiver | |
|
|
|
|
Related Devices
