Click on a Product Family to view new products
AllAmplifiersBattery ManagementData CommDigital Control-DCPs,DCCs
Display ProductsHot Plug ControllersInterfaceLinear RegulatorsOptical Storage
OtherPower Supply SupportSwitch/MUXSwitching Regulation 
ISL54409

October 2009

Audio/USB 2.0 Wired-OR Switch with Click and Pop Reduction
The Intersil ISL54409 and ISL54410 are Dual SPST (Single Pole/Single Throw) switches that provides a very low distortion audio path for a stereo headphone and can be connected in a wired-OR configuration at the switch outputs with USB2.0 HS signals for Audio/USB signal multiplexing to a common connector. The audio switch path can be disabled to provide high signal isolation, preventing crosstalk b More
Datasheet
Device Information
ISL54410

October 2009

Audio/USB 2.0 Wired-OR Switch with Click and Pop Reduction
The Intersil ISL54409 and ISL54410 are Dual SPST (Single Pole/Single Throw) switches that provides a very low distortion audio path for a stereo headphone and can be connected in a wired-OR configuration at the switch outputs with USB2.0 HS signals for Audio/USB signal multiplexing to a common connector. The audio switch path can be disabled to provide high signal isolation, preventing crosstalk b More
Datasheet
Device Information
ISL54222A

May 2009

High-Speed USB 2.0 (480Mbps) Multiplexer
The Intersil ISL54222A is a single supply dual 2:1 multiplexer that can operate from a single 1.8V to 3.3V supply. It contains two SPDT (Single Pole/Double Throw) switches configured as a DPDT. The part was designed for switching or routing of USB High-Speed signals and/or USB Full-speed signals in portable battery powered products. More
Datasheet
Press Release
Press Release
Device Information
ISL54062

March 2009

Negative Signal Swing, Sub-ohm, Dual SPDT with Click and Pop Elimination Single Supply Switch
The Intersil ISL54062 device is a low ON-resistance, low voltage, bidirectional, dual single-pole/double-throw (SPDT) analog switch. It is designed to operate from a single +1.8V to +6.5V supply and pass signals that swing down to 6.5V below the positive supply rail. Targeted applications include battery powered equipment that benefit from low r<sub>ON</sub> (0.56&#937;), low power More
Datasheet
Press Release
Press Release
Device Information
ISL54063

March 2009

Negative Signal Swing, Sub-ohm, Dual SPST with Click and Pop Elimination Single Supply Switch
The Intersil ISL54063 and ISL54064 devices are a low ON-resistance, low voltage, bi-directional, dual single-pole/single-throw (SPST) analog switch. It is designed to operate from a single +1.8V to +6.5V supply and pass signals that swing down to 6.5V below the positive supply rail. Targeted applications include battery powered equipment that benefit from low r<sub>ON</sub> (0.56&# More
Datasheet
Press Release
Press Release
Device Information
ISL54066

March 2009

Negative Signal Swing, High Off-Isolation, Dual SPST Single Supply Switch
The Intersil ISL54066 device is a low ON-resistance, high off-isolation, low voltage, dual single-pole/single-throw (SPST) analog switch. It was designed to operate from a single +1.8V to +6.5V supply and can pass signals that swing down to 6.5V below the positive supply rail. Targeted applications include battery powered equipment that benefit from low r<sub>ON</sub> (1&#937;), hi More
Datasheet
Device Information
ISL54064

March 2009

Negative Signal Swing, Sub-ohm, Dual SPST with Click and Pop Elimination Single Supply Switch
The Intersil ISL54063 and ISL54064 devices are a low ON-resistance, low voltage, bi-directional, dual single-pole/single-throw (SPST) analog switch. It is designed to operate from a single +1.8V to +6.5V supply and pass signals that swing down to 6.5V below the positive supply rail. Targeted applications include battery powered equipment that benefit from low r<sub>ON</sub> (0.56&# More
Datasheet
Press Release
Press Release
Device Information
ISL54222

February 2009

High-Speed USB 2.0 (480Mbps) Multiplexer
The Intersil ISL54222 is a single supply dual 2:1 multiplexer that can operate from a single 1.8V to 3.3V supply. It contains two SPDT (Single Pole/Double Throw) switches configured as a DPDT. The part was designed for switching or routing of USB High-Speed signals and/or USB Full-speed signals in portable battery powered products. More
Datasheet
Press Release
Press Release
Device Information
ISL54223

February 2009

High-Speed USB 2.0 (480Mbps) Multiplexer
The Intersil ISL54223 is a single supply dual 2:1 multiplexer that can operate from a single 1.8V to 3.3V supply. It contains two SPDT (Single Pole/Double Throw) switches configured as a DPDT. The part was designed for switching or routing of USB High-Speed signals and/or USB Full-speed signals in portable battery powered products. More
Datasheet
Device Information
ISL54230

December 2008

Octal Multiprotocol Switch
The Intersil ISL54230 is a multiprotocol Quad Double-Pole Double-Throw (DPDT) analog switch that can operate from a single +2.0V to +5.5V supply. It contains eight SPDT (Single Pole/Double Throw) switches configured into four DPDT blocks. Each DPDT block is independently controlled by a logic input for Normally Open (NO) or Normally Closed (NC) switch configuration.The part is designed for switching or routing a combination of USB High-Speed, USB Full-Speed, digital, and analog signals in portable battery powered products. More
Datasheet
Press Release
Press Release
Device Information
ISL54059

December 2008

+1.8V to +6.5V, Sub-Ohm, Dual SPDT Analog Switch with Negative Signal Capability
The Intersil ISL54059 device is a low ON-resistance, low voltage, bidirectional, dual single-pole/double-throw (SPDT) analog switch. It is designed to operate from a single +1.8V to +6.5V supply and pass signals that swing up to 6.5V below the positive supply rail. Targeted applications include battery powered equipment that benefit from low rON (0.56Ω), low power consumption (8nA) and fast switching speeds (tON = 55ns, tOFF = 18ns). The digital inputs are1.8V logic-compatible up to a +3V supply. The ISL54059 is offered in a small form factor package, alleviating board space limitations. It is available in a tiny 10 Ld 1.8x1.4mm μTQFN or 10 Ld 3x3mm TDFN package. More
Datasheet
Device Information
ISL54060

December 2008

Negative Signal Swing, Sub-ohm, Dual SPST Single Supply Switch
The Intersil ISL54060 and ISL54061 devices are a low ON-resistance, low voltage, bi-directional, dual single-pole/single-throw (SPST) analog switch. It is designed to operate from a single +1.8V to +6.5V supply and pass signals that swing down to 6.5V below the positive supply rail. Targeted applications include battery powered equipment that benefit from low r<sub>ON</sub> (0.56&# More
Datasheet
Device Information
ISL54061

December 2008

Negative Signal Swing, Sub-ohm, Dual SPST Single Supply Switch
The Intersil ISL54060 and ISL54061 devices are a low ON-resistance, low voltage, bi-directional, dual single-pole/single-throw (SPST) analog switch. It is designed to operate from a single +1.8V to +6.5V supply and pass signals that swing down to 6.5V below the positive supply rail. Targeted applications include battery powered equipment that benefit from low r<sub>ON</sub> (0.56&# More
Datasheet
Device Information
ISL54065

December 2008

Negative Signal Swing, Sub-ohm, Dual SPDT with Click and Pop Elimination Single Supply Switch with Enable Pin
The Intersil ISL54065 device is a low ON-resistance, low voltage, bi-directional, dual single-pole/double-throw (SPDT) analog switch. It is designed to operate from a single +1.8V to +6.5V supply and pass signals that swing down to 6.5V below the positive supply rail. Targeted applications include battery powered equipment that benefit from low r<sub>ON</sub> (0.56&#937;), low powe More
Datasheet
Press Release
Press Release
Device Information
ISL54220

December 2008

High-Speed USB 2.0 (480Mbps) Multiplexer
The Intersil ISL54220 is a single supply dual 2:1 multiplexer that can operate from a single 2.7V to 5.5V supply. It contains two SPDT (Single Pole/Double Throw) switches configured as a DPDT. The part was designed for switching or routing of USB High-Speed signals and/or USB Full-speed signals in portable battery powered products. More
Datasheet
Device Information
ISL54221

December 2008

High-Speed USB 2.0 (480Mbps) Multiplexer
The Intersil ISL54221 is a single supply dual 2:1 multiplexer that can operate from a single 2.7V to 5.5V supply. It contains two SPDT (Single Pole/Double Throw) switches configured as a DPDT. The part was designed for switching or routing of USB High-Speed signals and/or USB Full-speed signals in portable battery powered products. More
Datasheet
Device Information
ISL54214

December 2008

USB 2.0 High-Speed x 2Channels/Stereo Audio Dual SP3T (Dual 3 to 1 Multiplexer)
The Intersil ISL54214 is a single supply dual SP3T analog switch that operates from a single supply in the range of 2.7V to 4.6V. It was designed to multiplex between audio stereo signals and two different USB 2.0 high speed differential data signals. The audio channels allow signal swings below ground, allowing the multiplexing of the voice and data signals through a common headphone connector in Personal Media Players and other portable battery powered devices. More
Datasheet
Press Release
Press Release
Device Information
ISL54217

December 2008

USB 2.0 High-Speed x 2Channels/Stereo Audio Dual SP3T (Dual 3 to 1 Multiplexer)
The Intersil ISL54217 is a single supply dual SP3T analog switch that operates from a single supply in the range of 2.7V to 4.6V. It was designed to multiplex between audio stereo signals and two different USB 2.0 high speed differential data signals. The audio channels allow signal swings below ground, allowing the multiplexing of voice and data signals through a common headphone connector in Personal Media Players and other portable battery powered devices. More
Datasheet
Press Release
Press Release
Device Information
About Us | Careers | Contact Us | Investors | Legal | Privacy | Site Map | Subscribe | Intranet

©2003-2009. Intersil Americas Inc. All rights reserved.