Click on a Product Family to view new products
AllAmplifiersBattery ManagementData CommDigital Control-DCPs,DCCs
Display ProductsHot Plug ControllersInterfaceLinear RegulatorsOptical Storage
OtherPower Supply SupportSwitch/MUXSwitching Regulation 
ISL21080CIH325

March 2010

300nA NanoPower Voltage References
The ISL21080 analog voltage references feature low supply voltage operation at ultra-low 310nA typ, 1.5μA max operating current. Additionally, the ISL21080 family features guaranteed initial accuracy as low as ±0.2% and 50ppm/°C temperature coefficient. More
Datasheet
Device Information
ISL21080CIH330

March 2010

300nA NanoPower Voltage References
The ISL21080 analog voltage references feature low supply voltage operation at ultra-low 310nA typ, 1.5μA max operating current. Additionally, the ISL21080 family features guaranteed initial accuracy as low as ±0.2% and 50ppm/°C temperature coefficient. More
Datasheet
Device Information
ISL24103

February 2010

Triple Channel High Voltage TFT-LCD Logic Driver
The ISL24103 is triple channel high voltage TFT-LCD logic driver that level shifts the outputs between the VON and VOFF voltages. The drivers are capable of delivering 500mA peak output current into highly capacitive loads with a peak-to-peak output voltage of up to 60V. The ISL24103 has a device enable pin and a delay pin to control the start-up delay. It also incorporates an output charge sharing function. More
Datasheet
Device Information
ZL2106

February 2010

6A Digital-DC Synchronous Step-Down DC-DC Converter
The ZL2106 is an innovative power conversion and management IC that combines an integrated synchronous step-down DC/DC converter with key power management functions in a small package, resulting in a flexible and integrated solution. More
Datasheet
Device Information
ISL62882C

February 2010

Multiphase PWM Regulator for IMVP-6.5™ Mobile CPUs and GPUs
The ISL62882C is a multiphase PWM buck regulator for miroprocessor or graphics processor core power supply. The multiphase buck converter uses interleaved phases to reduce the total output voltage ripple with each phase carrying a portion of the total load current, providing better system performance, superior thermal management, lower component cost, reduced power dissipation, and smaller implementation area. The ISL62882C uses two integrated gate drivers to provide a complete solution. The PWM modulator is based on Intersil's Robust Ripple Regulator (R3) technology™. Compared with traditional modulators, the R3™ modulator commands variable switching frequency during load transients, achieving faster transient response. With the same modulator, the switching frequency is reduced at light load, increasing the regulator efficiency. More
Datasheet
Device Information
ISL62883C

February 2010

Multiphase PWM Regulator for IMVP-6.5™ Mobile CPUs and GPUs
The ISL62883C is a multiphase PWM buck regulator for miroprocessor or graphics processor core power supply. The multiphase buck converter uses interleaved phase to reduce the total output voltage ripple with each phase carrying a portion of the total load current, providing better system performance, superior thermal management, lower component cost, reduced power dissipation, and smaller implementation area. The ISL62883C uses two integrated gate drivers and an external gate driver to provide a complete solution. The PWM modulator is based on Intersil's Robust Ripple Regulator (R3) technology™. Compared with traditional modulators, the R3™ modulator commands variable switching frequency during load transients, achieving faster transient response. With the same modulator, the switching frequency is reduced at light load, increasing the regulator efficiency. More
Device Information
ISL95870

January 2010

PWM DC/DC Controller with VID Inputs for Portable GPU Core-Voltage Regulator
The ISL95870, ISL95870A, ISL95870B ICs are Single-Phase Synchronous-Buck PWM regulators featuring Intersil’s proprietary R4 Technology™. The wide 3.3V to 25V input voltage range is ideal for systems that run on battery or AC-adapter power sources. The ISL95870A and ISL95870B are low-cost solutions for applications requiring dynamically selected slew-rate controlled output voltages. The soft-start and dynamic setpoint slew-rates are capacitor programmed. Voltage identification logic-inputs select four (ISL95870A, ISL95870B) resistor-programmed setpoint reference voltages that directly set the output voltage of the converter between 0.5V and 1.5V, and up to 5V with a feedback voltage divider. More
Datasheet
Device Information
ISL80101

December 2009

High Performance 1A LDO
The ISL80101 ia a low-voltage, high-current, single output LDO specified for 1A output current. This part operates from input voltages of 2.2V to 6V and is capable of providing output voltages of 0.8V to 5V on the adjustable VOUT versions. Fixed output voltage options available in 0.8V, 1.2V, 1.5V, 1.8V, 2.5V, 3.3V and 5V. Other custom voltage options available upon request. More
Datasheet
Device Information
ISL95870B

December 2009

PWM DC/DC Controller with VID Inputs for Portable GPU Core-Voltage Regulator
The ISL95870, ISL95870A, ISL95870B ICs are Single-Phase Synchronous-Buck PWM regulators featuring Intersils proprietary R4 Technology™. The wide 3.3V to 25V input voltage range is ideal for systems that run on battery or AC-adapter power sources. The ISL95870A and ISL95870B are low-cost solutions for applications requiring dynamically selected slew-rate controlled output voltages. The soft-start and dynamic setpoint slew-rates are capacitor programmed. Voltage identification logic-inputs select four (ISL95870A, ISL95870B) resistor-programmed setpoint reference voltages that directly set the output voltage of the converter between 0.5V and 1.5V, and up to 5V with a feedback voltage divider. More
Datasheet
Device Information
ICL3221EM

December 2009

±15kV ESD Protected, +3V, 1μA, 250kbps, RS-232 Transmitters/Receivers
The Intersil ICL3221EM devices are 3.0V powered RS-232 transmitters/receivers which meet ElA/TIA-232 and V.28/V.24 specifications. Additionally, they provide ±15kV ESD protection (IEC61000-4-2 Air Gap and Human Body Model) on transmitter outputs and receiver inputs (RS-232 pins). Targeted applications are PDAs, Palmtops, and notebook and laptop computers where the low operational, and even lower standby, power consumption is critical. Efficient on-chip charge pumps, coupled with manual and automatic power-down functions, reduce the standby supply current to a 1μA trickle. Small footprint packaging, and the use of small, low value capacitors ensure board space savings as well. Data rates greater than 250kbps are guaranteed at worst case load conditions. The device is fully compatible with 3.3V-only systems. More
Datasheet
Device Information
ISL8206M

December 2009

Complete High Efficiency DC/DC Power Module
The ISL8204M, ISL8206M is a family of pin-compatible power modules to the ISL8201M. These are simple and easy to use, high power DC\DC modules and are ideal for a wide variety of applications. The ISL820xM family of high current DC\DC step-down modules virtually eliminate design and manufacturing risks while dramatically improving time to market. More
Datasheet
Press Release
Press Release
Press Release
Press Release
Device Information
ISL8204M

December 2009

Complete High Efficiency DC/DC Power Module
The ISL8204M, ISL8206M is a family of pin-compatible power modules to the ISL8201M. These are simple and easy to use, high power DC\DC modules and are ideal for a wide variety of applications. The ISL820xM family of high current DC\DC step-down modules virtually eliminate design and manufacturing risks while dramatically improving time to market. More
Datasheet
Press Release
Press Release
Press Release
Press Release
Device Information
ISL8200M

December 2009

Complete Current Share 10A DC/DC Power Module
The ISL8200M is a simple and easy to use high power, current-sharing DC\DC power module for Datacom\Telecom\FPGA power hungry applications. All that is needed is the ISL8200M, a few passive components and one VOUT setting resistor to have a complete 10A design ready for market. The ease of use virtually eliminates the design and manufacturing risks while dramatically improving time to market. More
Datasheet
Press Release
Press Release
Press Release
Press Release
Press Release
Device Information
ISL78840ASRH

December 2009

Radiation Hardened, High Performance Industry Standard Single-Ended Current Mode PWM Controller
The ISL7884xASRH is a high performance, radiation hardened drop-in replacement for the popular 28C4x and 18C4x PWM controllers suitable for a wide range of power conversion applications including boost, flyback, and isolated output configurations. Its fast signal propagation and output switching characteristics make this an ideal product for existing and new designs. More
Datasheet
Device Information
ISL78841ASRH

December 2009

Radiation Hardened, High Performance Industry Standard Single-Ended Current Mode PWM Controller
The ISL7884xASRH is a high performance, radiation hardened drop-in replacement for the popular 28C4x and 18C4x PWM controllers suitable for a wide range of power conversion applications including boost, flyback, and isolated output configurations. Its fast signal propagation and output switching characteristics make this an ideal product for existing and new designs. More
Datasheet
Device Information
ISL78843ASRH

December 2009

Radiation Hardened, High Performance Industry Standard Single-Ended Current Mode PWM Controller
The ISL7884xASRH is a high performance, radiation hardened drop-in replacement for the popular 28C4x and 18C4x PWM controllers suitable for a wide range of power conversion applications including boost, flyback, and isolated output configurations. Its fast signal propagation and output switching characteristics make this an ideal product for existing and new designs. More
Datasheet
Device Information
ISL78845ASRH

December 2009

Radiation Hardened, High Performance Industry Standard Single-Ended Current Mode PWM Controller
The ISL7884xASRH is a high performance, radiation hardened drop-in replacement for the popular 28C4x and 18C4x PWM controllers suitable for a wide range of power conversion applications including boost, flyback, and isolated output configurations. Its fast signal propagation and output switching characteristics make this an ideal product for existing and new designs. More
Datasheet
Device Information
About Us | Careers | Contact Us | Investors | Legal | Privacy | Site Map | Subscribe | Intranet

©2003-2010. Intersil Americas Inc. All rights reserved.