| |
|
 |
|
All Intersil Products |
Interface
Linecard
|
Product Selection Guide |
|
Interface
Linecard |
|
|
|
Intersil has over 100 different transceivers for data
communication and industrial applications. Whether you're
using RS-485/RS-422 protocol or
RS-232 for portable or computing designs, Intersil has
solutions for all of
your data transmission products - including our new protocol
ICs for
RS-232/RS-485 compatibility. |
|
|
|
|
|
Sortable Selection Tables |
|
Interface ICs  | | RS-232 | | By Organization | | ESD Protected, 3V | | ESD Protected, 5V | | > 250kbps, 3V | | High Speed, 5V | | QFN Packaged Devices | | Standard, 5V | | RS-485/RS-422 | | IEC61000 15kV ESD | | HBM 12kV to 15kV ESD | | +125°C Operation | | Rx Only or Tx Only, 15kV ESD | | Logic Supply (VL) Pin | | 5V 1UL | | 5V Fractional UL | | 3.3V 1UL | | 3.3V, Fractional UL, High ESD, Full Failsafe | | 40Mbps to 100Mbps | | >15Mbps Data Rate | | 5Mbps Data Rate | | 10Mbps Data Rate | | MICRO Packaged (MSOP, SOT-23, DFN) | | Full Failsafe (Rx Open/Rx Short) | | Hot Plug | | Low Current Shutdown | | PROFIBUS Compatible | | Multi-Protocol | | RS-232 and RS-485 | | I2C and SMBus Buffers and Accelerators | | SMBus Accelerator (SMA) |
|
|
|
|
|
|
New Products |
 | | ISL83084E | March 2008 | | | ±15kV ESD, 5V, Full Fail-Safe, 1/8 Unit Load, RS-485/RS-422 Transceivers | | The ISL8308xE are BiCMOS, ESD protected, 5V powered, single transceivers that meet both the RS-485 and RS-422 standards for balanced communication. Each driver output, and receiver input, is protected against ±15kV ESD strikes without latch-up, and unlike competitive products, this Intersil family is specified for 10% tolerance supplies (4.5V to 5.5V). More | | Datasheet
Device Information |
| | ISL3285E | October 2007 | | | ±16.5kV ESD Protected, +125°C, 3.0V to 5.5V, SOT-23/TDFN Packaged, 20Mbps, Full Fail-safe, Low Power, RS-485/RS-422 Receivers | | The Intersil ISL3280E, ISL3281E, ISL3282E, ISL3283E, ISL3284E, ISL3285E are ±16.5kV IEC61000 ESD Protected, 3.0V to 5.5V powered, single receivers that meet both the RS-485 and RS-422 standards for balanced communication. These receivers have very low bus currents (+125μA/-100μA), so they present a true “1/8 unit load” to the RS-485 bus. This allows up to 256 receivers on the network without violating the RS-485 specification’s 32 unit load maximum and without using repeaters. More | | Datasheet
Device Information |
|
|
|
Most Recent Application Notes |
![]() |
|
|
